• Advanced Composite Materials
• /
• v.17 no.3
• /
• pp.277-299
• /
• 2008

High quality and expedient processing repair methods are necessary to enhance the service life of bridge structures. Deterioration of concrete can occur as a result of structural cracks, corrosion of reinforcement, and freeze.thaw cycles. Cost effective methods with potential for field implementation are necessary to address the issue of the vulnerability of bridge structures and how to repair them. Most infrastructure related applications of fiber-reinforced plastics (FRPs) use traditional hand lay-up technology. The hand lay-up is tedious, labor-intensive and relies upon personnel skill level. An alternative to traditional hand lay-up of FRP for infrastructure applications is Vacuum Assisted Resin Transfer Molding (VARTM). VARTM uses single sided molding technology to infuse resin over fabrics wrapping large structures, such as bridge girders and columns. There is no work currently available in understanding the interface developed, when VARTM processing is adopted to wrap fibers such as carbon and/or glass over concrete structures. This paper investigates the interface formed by carbon fiber processed on to a concrete surface using the VARTM technique. Various surface treatments, including sandblasting, were performed to study the pull-off tensile test to find a potential prepared surface. A single-lap shear test was used to study the bond strength of CFRP fabric/epoxy composite adhered to concrete. Carbon fiber wraps incorporating Sikadur HEX 103C and low viscosity epoxy resin Sikadur 300 were considered in VARTM processing of concrete specimens.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.143-150
• /
• 2010

Vitrification technology has been gradually recognized as one of effective solidification methods for concentrated boric acid wastes generated in PWR. Vitrification for low- and intermediate-level radioactive wastes has a large volume reduction and good durability for the final products. A feasibility study for the vitrification of concentrated boric acid wastes has been performed with developing the pre-treatment methods of powdered wastes, glass compositions using glass formulation and demonstration test. The pre-treatment method is pelletizing the powder type for stable feeding within cold crucible melter. The glass compositions should be developed considering molten glass are related with wastes reduction. High contents of sodium and boron within borate wastes give influence to waste loading. A variety of factors obtained from the demonstration test are reviewed, which is wastes feeding rate, off-gas characteristics on stack and glass characteristics of final products such as durability for implementing the wastes disposal requirement. The aim of this paper is to present the feasibility of vitrification and review the solidification method for concentrated boric acid wastes and obtain the physicochemical characteristics of solidified glass.

• Korean Journal of Family Medicine
• /
• v.39 no.6
• /
• pp.325-332
• /
• 2018

Background: Hypertension is a major contributor to the global disease burden of cardiovascular and cerebrovascular disease. The aim of this study was to determine demographic and clinical factors associated with adherence to antihypertensive medication. Methods: From August 2012 to February 2015, we recruited 1,523 Korean patients with hypertension who visited family physicians. The study was conducted in 24 facilities located in urban and metropolitan areas. Of these facilities, two were primary care clinics and 22 were level 2 or 3 hospitals. Adherence was assessed using the pill count method; a cut-off value of 80% was used as the criterion for good adherence. Sociodemographic and lifestyle factors were compared between the adherent and nonadherent groups using the chi-square test for categorical variables and t-test for continuous variables. Binary logistic regression analysis was performed with medication adherence as the outcome variable. Results: Of the 1,523 patients, 1,245 (81.7%) showed good adherence to antihypertensive medication. In the multivariate logistic analysis, age ${\geq}65$ years, exercise, treatment in a metropolitan-located hospital, being on ${\geq}2$ classes of antihypertensive medication and concomitant medication for diabetes, and a family history of hypertension or cardiovascular diseases were associated with good adherence. Patients who had a habit of high salt intake were less adherent to medication. Conclusion: Multiple classes of antihypertensive medications, concomitant medication, and exercise were associated with good adherence to antihypertensive medication, and high salt intake was associated with poor adherence to antihypertensive medication. These factors should be considered to improve hypertension control.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.248-259
• /
• 2007

The aim of this research was to study the effect of intermittent polymerization on marginal adaptation by comparing the marginal adaptation of intermittently polymerized composite to that of continuously polymerized composite. The materials used for this study were Pyramid (Bisco Inc., Schaumburg, U.S.A.) and Heliomolar (Ivoclar Vivadent, Liechtenstein) . The experiment was carried out in class II MOD cavities prepared in 48 extracted human maxillary premolars. The samples were divided into 4 groups by light curing method: group 1- continuous curing (60s light on with no light off), group 2-intermittent curing (cycles of 3s with 2s light on & 1s light off for 90s); group 3- intermittent curing (cycles of 2s with 1s light on & 1s light off for 120s); group 4- intermittent curing (cycles of 3s with 1s light on & 2s light off for 180s). Consequently the total amount of light energy radiated was same in all the groups. Each specimen went through thermo-mechanical loading (TML) which consisted of mechanical loading (720,000 cycles, 5.0 kg) with a speed of 120 rpm for 100hours and thermocycling (6000 thermocycles of alternating water of $50^{\circ}C$ and $55^{\circ}C$). The continuous margin (CM) (%) of the total margin and regional margins, occlusal enamel (OE), vertical enamel (VE), and cervical enamel (CE) was measured before and after TML under a $\times200$ digital light microscope. Three-way ANOVA and Duncan's Multiple Range Test was performed at 95% level of confidence to test the effect of 3 variables on CM (%) of the total margin: light curing conditions, composite materials and effect of TML. In each group, One-way ANOVA and Duncan's Multiple Range Test was additionally performed to compare CM (%) of regions (OE, VE CE). The results indicated that all the three variables were statistically significant (p < 0.05). Before TML, in groups using Pyramid, groups 3 and 4 showed higher CM (%) than groups 1 and 2, and in groups using Heliomolar. groups 3 and 4 showed higher CM (%) than group 1 (p < 0.05). After TML, in both Pyramid and Heliomo)ar groups, group 3 showed higher CM (%) than group 1 (p < 0.05) CM (%) of the regions are significantly different in each group (p < 0.05). Before TML, no statistical difference was found between groups within the VE and CE region. In the OE region, group 4 of Pyramid showed higher CM (%) than group 2, and groups 2 and 4 of Heliomolar showed higher CM (%) than group 1 (p < 0.05). After TML, no statistical difference was found among groups within the VE and CE region. In the OE region, group 3 of Pyramid showed higher CM (%) than groups 1 and 2, and groups 2,3 and 4 of Heliomolar showed higher CM (%) than group 1 (p < 0.05). It was concluded that intermittent polymerization may be effective in reducing marginal gap formation.

• Therapeutic Science for Rehabilitation
• /
• v.8 no.4
• /
• pp.65-76
• /
• 2019

Objective : This study aimed to verify the validity and reliability of the Upper Extremity Performance Test for the Elderly (TEMPA) by modifying its items to exhibit cultural differences. Methods : This study included 171 healthy adults and older adults and 41 individuals with impaired upper extremity function. Content validity, discriminant validity, test-retest reliability, and inter-rater reliability were analyzed. Results : The following items, exhibiting cultural differences, were modified: "open a lock and take the top off a pillbox" and "write and affix a postage stamp." The discriminant validity results indicated that participants with normal upper extremity function performed better than those with impaired in the upper extremity function (p<.001). The test-retest reliability of the execution speed (intraclass correlation coefficient; ICC) was .71-.94, functional rating (kappa) was 1.0, and task analysis (ICC) was 1.0. The inter-rater reliability of the speed of execution was 1.0, functional rating was .79-1.0, and task analysis was .94-1.0. Conclusion : TEMPA has moderate to high level of reliability and is an assessment tool that can clearly distinguish individuals with upper extremity impairment from those without impairment.

• Journal of Engineering Education Research
• /
• v.20 no.5
• /
• pp.59-73
• /
• 2017

This study aims to examine whether a gender works to make the difference on the university experiences of natural sciences and engineering major students; and the income and quality gap between the graduates. In this study, university experiences means job market and job searching related experiences such as job fair attending, The main research questions are as follows; fist, what are the significant university experiences related job preparation and application, and is there a gender gap on those experiences? Second, how is the job market performance of the national sciences and engineering graduates for their income level and quality job, and is there a gender gap on the job market performance of the sample? Third, which variables among the university experiences for job searching and application impacts the job quality and income level of the natural sciences and engineering graduates? To find out the research results, this study conducts a panel data analysis with GOMS (Graduates Occupational Mobility Survey) throughout survey year of 2006 to 2015, towards 568,264 as weighted value number. As analysis methods, this study carries out a descriptive analysis, ANOVA, discriminant analysis, linear regression and T-test. Therefore, here are the brief outputs of the study; first, for natural sciences and engineering students, the off-campus experiences such as job fair, job recruit festival and internship programs are more favored; second, female students are more likely to attend personal and self-driven job preparation programs; third, on job market performance, the graduates' income level and company scale rate are higher in the male but job stability is higher in the female; fourth, as a result of the linear regression, gender factor decides the income level in considerable degree; additionally, gender factor shows the difference of the job satisfaction and self-effectiveness on one's job as a qualitative variables. For obtaining strictness, university program factors are controlled through model fitness process. As above, this study finds out the main factors of university life of natural sciences and engineering graduates which are related their job searching and preparation experiences and figures out stronger factors in job market; and examines the statistically significance of the gender in this casual-effect relationship between job preparation and job quality of the graduates.

• Ocean and Polar Research
• /
• v.34 no.2
• /
• pp.151-163
• /
• 2012

Digestive cells of the bivalves have a highly developed lysosomal system and the system is known to be sensitive to changes in environmental qualities. In this study, we measured lysosomal responses of the digestive cells in wild oyster, Crassostrea gigas using frozen section. Oysters were collected in June 2010 from intertidal areas in the inner and outer bay of Gwangyang off the south coast of Korea. From the tissue sections, we measured the digestive cell lysosomal membrane stability (LMS), level of neutral lipids (NL), lipofuscin (LF) and the digestive gland atrophy (DGA). The DGA and condition index of oysters from the inner bay were significantly lower (P<0.05). The statistical test indicated that LMS levels of oysters in the inner bay and the outer bay were not significantly different since a shorter activity was displayed by oysters from the inner bay than that of oysters in outer bay. The LF deposition level of the oysters in the inner bay displayed significantly higher levels than the outer bay (P<0.05). In contrast, the NL accumulation measured from oysters in outer bay was significantly higher than the level observed in the inner bay (P<0.05). Different levels of DGA and LF that were observed in the inner and outer bays were thought to be associated to different level of environmental contamination and these two assays are considered to be good biomarkers.

• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.95-103
• /
• 2012

Purpose: Fracture strength of all-ceramic 3-unit fixed partial dentures manufactured by CAD/CAM and copy-milling systems were evaluated. Methods: Zirconia cores were made by milling the pre-sintered zirconia block by CAD/CAM or copy milling method followed by subsequent sintering. By building-up the corresponding porcelains on the core, all-ceramic bridges were fabricated, and those were evaluated in comparison with PFM fixed partial denture. Results: During the flexural test of the 3-unit PFM bridge, the porcelain started to chip or break at 507.28(${\pm}62.82$)kgf and the metal framework did not break until the maximum load level of 800kgf which was set in the testing instrument of this study. However, among all-ceramic restoration test groups, Everest(EV) group showed a peeling off or breakage of the porcelain from 365.64(${\pm}64.96$)kgf and the core was broken at 491.77(${\pm}55.62$)kgf. Those values of Zirkonzahn(ZR) were 431.03(${\pm}58.47$)kgf and 602.74(${\pm}48.44$)kgf, respectively. The break strength of the porcelain of PFM(PM) group was significantly higher than that of EV (p<0.05) group and there was no significant difference when comparing to that of ZR (p>0.05). ZR group showed higher break strength than that of EV group however there was no significant difference (p>0.05). The break strength of cores were in the increasing order of EV < ZR < PM (p<0.05). Conclusion: We could find that even though the PM group fractured at much higher value than all-ceramic cores, the breakage values of the porcelain of PM group with crack formation or delamination, which will be regarded as clinical failure, was significantly higher than that of EV group and not significantly higher than that of ZR group at p-values of 0.05. The break strength of ZR group was higher than that of EV group at an insignificant level(p>0.05).

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.228-239
• /
• 2013

Purpose: The objectives of this study were to develop an automated disinfectant dilution system, and an automated data management system for spraying amount for resolving uncertainty problem. Methods: Proper diluting rate was made by a controlled volume pump for liquid disinfectant and a screw conveyer pump for solid disinfectant. The water capacity of disinfecting system of 400 L was controlled by two water level sensors. The water quantity of water tank was controlled by the signals which were produced by the water level sensors. Signals were processed by Labview Programming, and ON/OFF of solenoid valve that was used for controlling water supplying to water tank, was controlled by SSR. The operating time of pumps for disinfectant was controlled quantitatively. A turbine flowmeter was used for development of automated measurement system for spraying amount of disinfectant. In order to save the flowmeter data and to control the spraying system, a multi-function data logger was used, and it was processed and saved in Excel file by a program developed in this study. Results: Labview 2010 was used for programming to control the automated measurement system for spraying amount of disinfectant. Results showed that the relationship between flowmeter value and time had a significant linear relationship such as 0.99 of $R^2$. Generally, 6.74 L/s of diluted disinfectant is sprayed for a vehicle passing through the disinfection system (about 15 seconds). Test results showed that average error between the measured spraying amount and the flowmeter data was 50 mL, and the range of error was 1.3%. Since the amount and time of spraying could be saved in real-time by using the spreadsheet files which could not be modified arbitrarily, it made possible to judge objectively whether the disinfection spraying was performed or not. Test results of spraying liquid and solid disinfectant showed that the errors between the measured discharge rate and the theoretical one were ranged within 3-4% for various dilution rates. Conclusions: The disinfection system developed would be working accurately. The automated spraying data base management system satisfied the purpose of this study. The automated dilution process system developed in this study could discharge liquid and solid disinfectant with accurate dilution rate, relatively.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.2
• /
• pp.91-98
• /
• 2017

Background & Object: Basic daily activity screening tool such as the Modified Barthel Index (MBI) has been used commonly in rehabilitation clinic and community based rehabilitation setting. Previous studies have shown the significant relations between the level of daily activities and driving ability on stroke or elderly people. However, there is a lack of studies to investigate the usefulness of MBI on prediction of driving ability for stroke patient. This study was to predict driving abilities of stroke survivor using Korean version Modified Barthel Index (K-MBI). Methods: A sample of 48 patients with stroke in rehabilitation hospital was recruited. All participants were tested level of basic daily activities using K-MBI. The driving ability of participants was tested using virtual reality driving simulator. The predictive validity was calculated of the K-MBI among pass or fail group of driving simulator test using receiver operating characteristics curves. Results: The cut-off score of >86.5 on the K-MBI is proper sensitivity to predict on driving performance ability. Conclusion: This pilot result offers clinical reference to therapists and caregivers for reasoning on driving recommendation period during rehabilitation stage of stroke survivors. Further studies need to identify prediction using real on-road test in a large population group.