• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.147-152
• /
• 2012

This paper dealt with the frequency component analysis of acoustic signals produced by corona and series-arc discharges as a diagnostic technique for closed-switchboards. Corona and series-arc discharge were simulated by a needle-plane electrode and an arc generator specified in UL1699, respectively. Acoustic signal was detected by a wideband acoustic sensor with a frequency bandwidth of 4 Hz~100 kHz (-3 dB). We analyzed frequency spectrums of the acoustic signals detected in various discharge conditions. The results showed that acoustic signals mainly exist in ranges from 30 kHz to 60 kHz. From the experimental results, an acoustic detection system which consists of a constant current power supply (CCP), a low noise amplifier (LNA) and a band pass filter was designed and fabricated. The CCP separates the signal component from the DC source of acoustic sensor, and the LNA has a gain of 40 dB in ranges of 280 Hz~320 kHz. The high and the low cut-off frequency are 30 kHz and 60 kHz, respectively. We could detect corona and series-arc discharges without any interference by the acoustic detection system, and the best frequency is considered in ranges of 30 kHz~60 kHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4186-4192
• /
• 2012

Because wind turbines are larger and more off-shore construction due to economic and environmental factors, it is more difficult to access the wind turbine as well as the necessary parts and the maintenance costs are increasing. So, we need to minimize fault elements and to prevent a secondary accident at failure through monitoring to reduce maintenance costs and to increase reliability of operation. In this paper we have implemented ZigBee based wireless sensor nodes and network for wind turbine condition monitoring using temperature, humidity, voltage, current, wind direction, and wind speed sensors. ZigBee wireless sensor nodes signals are transmitted to a central monitoring system via routers. Also, the sensor signals are collected and processed using LabVIEW program to monitor the wind turbine conveniently. The administrators and users can monitor the condition of wind turbine at remote site in real time over TCP/IP.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.25
• /
• pp.41-71
• /
• 2005

"UNIDROIT Principles 2004" focused on an enlargement rather than a revision. An additional Section or Chapter so to speak, which are about, the Authority of a Agents, Third Party Rights, Set-off, Assignment of Rights, Transfer of Obligations and Assignment of Contracts, and Limitation Periods have been added, while the only change of substance made to the 1994 Edition, apart from two paragraphs in the Preamble, and three new provisions in Chapter 1 and 2 which are necessary to adapt the Principles to the needs of electronic contracting. The Principles which have the nature of the restatement of international uniform laws (for example CISG) are continuous exercise. Therefore we should note whether in the future our concerns would be on a additional topics on a improvement of the current text by monitoring the reception of the "UNIDROIT Principles 2004" in practice, and the application by contracting parties. The purposes of the Principles may be classified into three ; the rules of law governing the contract, means of interpreting and supplementing international uniform law or domestic law, or models for national and international legislator. Among them, the function of governing law may be applied by the express choice by the parties or by the implied choice like "general principles of law" or "les mercatoria", and it may be applied in the absence of any choice of law by the parties. Among there importance functions, this writer would like to emphasize the function to supplementing international uniform law instruments. The reason is that the CISG which has been established as an international uniform sales act and to which our country would be a contracting State from March, 2005, needs a lot of gap-filling. For this purpose it is advisable the parties to insert following provisions in their contract. "This contract shall be governed by the CISG, supplemented when necessary by the UNIDROIT Principles 2004" Thus success in practice of the UNIDROIT Principles over the last then years has surpassed the most optimistic expectations. It is hoped that the 2004 Edition of the UNIDROIT Principles will be just as favorably received by legislators, business persons, lawyers, arbitrators and judges and become even better known and more widely used throughout the World.

• Fashion & Textile Research Journal
• /
• v.16 no.1
• /
• pp.145-152
• /
• 2014

The usage of textile-based sensors has increased due to their many advantages (compared to IT sensors) when applied to body assessment and comfort. Textile-based sensors have different detecting factors such as pressure, voltage, current and capacitance to investigate the characteristics. In this study, textile-based sensor fabrics with sheath-core type conductive yarns were produced and the relationship between capacitance changes and applied load was investigated. The physical and electric properties of textile-based sensor fabrics were also investigated under various laminating conditions. A textile based pressure sensor that uses a sheath-core conductive yarn to ensure the stability of the pressure sensor in the textile-based sensor (the physical structure of the reaction characteristic of the capacitance) is important for the stability of the initial value of the initial capacitance value outside the characteristic of the textile structural environment. In addition, a textile based sensor is displaced relative to the initial value of the capacitance change according to pressure changes in the capacitance value of the sensor due to the fineness of the high risk of noise generation. Changing the physical structure of the fabric through the sensor characteristic of the pressure sensor via the noise generating element of laminating (temperature, humidity, and static electricity) to cut off the voltage output element to improve the data reliability could be secured.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1114-1119
• /
• 2004

The biofilms on pipe walls in water distribution systems are of interest since they can lead to chlorine demand, coliform growth, pipe corrosion, and water taste and odor problems. As such, the study described in this paper is part of an AWWARF and Tampa Bay Water tailored collaboration project to determine the effect of blending different source waters on the water quality in various distribution systems. The project was based on 18 independent pilot distribution systems (PDS), each being fed by a different water blend (7 finished waters blended in different proportions). The source waters compared were groundwater, surface water, and brackish water, which were treated in a variety of pilot distribution systems, including reverse osmosis (RO) (desalination), both membrane and chemical softening, and ozonation-biological activated carbon (BAC), resulting in a total of 7 different finished waters. The observations from this study consistently demonstrated that unlined ductile iron was more heavily colonized by a biomass than galvanized steel, lined ductile iron, and PVC (in that order) and that the fixed biomass accumulation was more influenced by the nature of the supporting material than by the water quality (including the secondary residual levels). However, although the bulk liquid water cultivable bacterial counts (i.e. heterotrophic plate counts or HPCs) did not increase with a greater biofilm accumulation, the results also suggested that high HPCs corresponded to a low disinfectant residual more than a high biofilm inventory. Furthermore, temperature was found to affect the biofilms, plus the AOC was important when the residual was between 0.6 and 2.0 mg $Cl_2/l$. An additional aspect of the current study was that the potential of the exoproteolytic activity (PEPA) technique was used along with a traditional so-called destructive technique in which the biofilm was scrapped off the coupon surface, resuspended, and cultivated on an R2A agar. Both techniques indicated similar trends and relative comparisons among the PDSs, yet the culturable biofilm values for the traditional method were several orders of magnitude lower than the PEPA values.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.4
• /
• pp.371-381
• /
• 2006

New proteomic techniques have been pioneered extensively in recent years, enabling the high-throughput and systematic analyses of cellular proteins in combination with bioinformatic tools. Furthermore, the development of such novel proteomic techniques facilitates the elucidation of the functions of proteins under stress or disease conditions, resulting in the discovery of biomarkers for responses to environmental stimuli. The ultimate objective of proteomics is targeted toward the entire proteome of life, subcellular localization biochemical activities, and the regulation thereof. Comprehensive analysis strategies of proteomics can be classified into three categories: (i) protein separation via 2-dimensional gel electrophoresis (2-DE) or liquid chromatography (LC), (ii) protein identification via either Edman sequencing or mass spectrometry (MS), and (iii) proteome quantitation. Currently, MS-based proteomics techniques have shifted from qualitative proteome analysis via 2-DE or 2D-LC coupled with off-line matrix assisted laser desorption ionization (MALDI) and on-line electrospray ionization (ESI) MS, respectively, toward quantitative proteome analysis. In vitro quantitative proteomic techniques include differential gel electrophoresis with fluorescence dyes. protein-labeling tagging with isotope-coded affinity tags, and peptide-labeling tagging with isobaric tags for relative and absolute quantitation. In addition, stable isotope-labeled amino acids can be in vivo labeled into live culture cells via metabolic incorporation. MS-based proteomics techniques extend to the detection of the phosphopeptide mapping of biologically crucial proteins, which ale associated with post-translational modification. These complementary proteomic techniques contribute to our current understanding of the manner in which life responds to differing environment.

• Journal of Energy Engineering
• /
• v.20 no.3
• /
• pp.178-184
• /
• 2011

Compressed Air Energy Storage (CAES) is a combination of energy storage and generation by storing compressed air using off-peak power for generation at times of peak demand. In general, both charging and discharging of high-pressure vessel are unsteady processes, where the pressure is varying. These varying conditions result in low efficiencies of compression and expansion. In this paper, a new constant-pressure CAES system to overcome the current problem is proposed. An energy analysis of the system based on the concept of exergy was performed to evaluate the energy density and efficiency of the system in comparison with the conventional CAES system. The new constant-pressure CAES system combined with pumped hydro storage requires the smaller cavern with only half of the storage volume for variable-pressure CAES and has a higher efficiency of system.

• Journal of Engineering Education Research
• /
• v.7 no.3
• /
• pp.44-50
• /
• 2004

We introduce an introductory engineering education course for engineering majors and non-engineering majors. This course does not require any previous knowledge and experience on engineering. It requires strong curiosities and imaginations on current and future society we live in, where technology is inseparable ingredient. Course encourages attendees to explore fundamental issues of engineering: what is proper technology and what are proper ways of exercising engineering, issues dealt in soft engineering. Since course topics cover many aspects of technology, traditional learning methods fail to be successful and efficient. Various efficient learning methods have been proposed and implemented. We utilize various interactive tangible media, which include simulated thought experiments and physical media experiences. About twenty (20) episodes in short film format are produced based on scenario written according to related issues selected. Physical media like interactive robots are introduced for attendees' stimulated experiences. We summarize our exciting experiments on interactive teaching experiences at Pusan National University which include on/off-line interactions, assignments, projects, and evaluations.

• Korean Institute of Interior Design Journal
• /
• v.25 no.5
• /
• pp.103-110
• /
• 2016

In recent years, as selling books on the internet becomes popular, the number of off-line bookstores are rapidly dwindling away. This change on the book market requires, the function and space of the bookstores should be defined again. Now bookstores are the places of experiences on cultures, world-views, and lifestyles around books. The study examines six large bookstores and finds three strategies of space expression as follow. First, Dominicanen bookstore in Maastricht which was built as a church has an expression which contrasts the old and the new as well as the sacred and the profane. Fangsuo bookstore in Chengdu creates a modern underground Sutra Depository. Here, people experience history and religion. Second, Cook & Book in Brussels has nine theme areas, each with a different selection of books, different interior decoration and special food and beverage like a theme park. Zhongshu bookshop in Shanghai has a lattice of nine reading rooms in which each unique design theme is characterized based on each book subject. Third, Cultura Bookstore in Sao Paulo is created to support social interchange. It leads people to the enormous plaza of books where people read books freely and participate in workshops, movies and all kinds of events. Daikanyama Tsutaya Books in Tokyo is composed of three white box-form pavilions which are connected by a 55-meter long aisle, called a magazine street. People walk along the street and choose concierge services as they browse magazines and books. The study finds out three strategies of design in current large bookstores to promote place-experience, which are the story-telling of history and culture, the design of theme parks, and openness for public mingling like plazas and streets. Thus, the study suggests a new paradigm in the design of bookstores in this internet age.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2070-2078
• /
• 2014

In this work, the frequency response of gate-all-around (GAA) Ge/GaAs heterojunction tunneling field-effect transistor (TFET) with hetero-gate-dielectric (HGD) and pnpn channel doping profile has been analysed by technology computer-aided design (TCAD) device-circuit mixed-mode simulations, with comparison studies among ppn, pnpn, and HGD pnpn TFET devices. By recursive tracing of voltage transfer curves (VTCs) of a common-source (CS) amplifier based on the HGD pnpn TFET, the operation point (Q-point) was obtained at $V_{DS}=1V$, where the maximum available output swing was acquired without waveform distortion. The slope of VTC of the amplifier was 9.21 V/V (19.4 dB), which mainly resulted from the ponderable direct-current (DC) characteristics of HGD pnpn TFET. Along with the DC performances, frequency response with a small-signal voltage of 10 mV has been closely investigated in terms of voltage gain ($A_v$), unit-gain frequency ($f_{unity}$), and cut-off frequency ($f_T$). The Ge/GaAs HGD pnpn TFET demonstrated $A_v=19.4dB$, $f_{unity}=10THz$, $f_T=0.487$ THz and $f_{max}=18THz$.