• 한국운동역학회지
• /
• 제18권1호
• /
• pp.53-62
• /
• 2008

본 연구는 플랫폼 다이빙 종목 205B를 3차원 영상분석을 통하여 운동학적 분석을 하였다. 총소요시간은 평균 $1.112{\pm}0.12s$로 나타났으며 여유 있는 연기를 수행하기 위해 많은 소요시간을 확보하여야 할 것으로 사료된다, 이지시 신체중심의 높이는 평균 88.8cm이며 수평거리는 144.8cm, 수평, 수직속도는 평균 1.08m/s, 1.3m/s로 나타났으며, 회전동작은 높은 위치에서 수행해야 하며, 수평거리는 짧아야 입수자세에 유리 할 것으로 판단된다. 하지분절의 속도변화는 이지 시 속도가 감소한 이후 회전이 이루어지는 시점까지 상승하며 이지 순간에는 회전보다는 점프동작에 더 큰 영향을 미치며, 신체중심을 축으로 회전동작으로 이어지고 속도가 상승하는 것으로 판단된다. 몸통각속도는 이지 시에 크게 나타났는데, 이는 상 방향으로 점프하여 회전에 필요한 힘을 얻기 위해 상체분절을 최대한 곧게 펴고 신체중심을 높게 유지하여 도약을 해야 효과적인 동작을 수행 할 수 있기 때문으로 사료된다.

• 한국콘텐츠학회논문지
• /
• 제15권8호
• /
• pp.556-563
• /
• 2015

본 연구의 목적은 스탠스 폭에 따른 신체의 좌우방향 이동에 대한 동작을 비교, 분석하는데 있다. 이를 위해 남자 대학생 7명(평균 신장 $174.9{\pm}4.8cm$, 평균 체중 $70.9{\pm}6.6kg$)이 실험에 참여하였다. 실험을 위해 고속카메라 9대와 지면반력기 2대가 이용되었으며, 두 가지의 스탠스 폭은 좁은 보폭(평균 42.9cm)과 넓은 보폭(평균 65cm)으로 제한하여 실시하였다. 실험을 통해 다음과 같은 결론을 얻었다. 첫째, 좁은 보폭이 양발이 착지 후 오른발이 이지하는 순간까지, 즉 추진 구간의 소요시간에서 유의하게 짧은 시간이 소요되었다. 둘째, 스플릿 스텝 후 오른발 이동 변위는 좁은 보폭이 유의하게 길게 나타났다. 셋째, 신체무게중심 속도는 오른 발 이지 시와 최대 속도에서 두 보폭 간에 유의한 차이가 나타나지 않았다. 넷째, 오른발 이지시 엉덩관절과 무릎관절의 각도는 좁은 보폭의 각도가 유의하게 더 크게 나타났다. 다섯째, 오른발 이지시 지면반력 값은 두 보폭 간에 유의한 차이가 나타나지 않았다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 춘계학술발표논문집
• /
• pp.55-55
• /
• 2000

환망초지기는 장망초지기와 달리 섬유배향성이 심할 뿐만 아니라, 초지속도를 높일 경우 실린더 회전에 따라 생긴 원심력으로 인하여 지필 파괴(wash-off)가 발생하기 때문에 속도에 제한을 받게 된다. 본 연구는 이런 점을 개선하기 위하여 forming zone과 탈수시간이 중요한 인자임을 인식하고 vat 인입부에 apron을 설치하고 mould head의 변화를 통하여 종이의 품질향상과 생산성 향상을 도모하고자 하였다. 그 결과 wash-off 의 감소로 인하여 퍼짐새(formation)의 향상은 물론 생산속도을 증가시킬 수 있어 생산성 향상을 도모할 수 있었다. 섬유 배향성 개선으로 인한 CD의 치수안정성 도모, 종이의 양면성 감소로 인한 컬 발생을 방지 할 수 있으며, 내부수위의 적절한 변경은 종이의 퍼짐새는 물론 종이구조 개선의 중요한 인자로 확인되었다.

• 한국레이저가공학회지
• /
• 제7권2호
• /
• pp.1-10
• /
• 2004

This work was attempted to join SCP sheet and STS304 sheet by using Nd:YAC laser beam. SCP sheet has good formability and low cost, while STS304 has excellent corrosion resistance and mechanical properties in high temp. In this experiment, butt joint type was used to develop the tailored blank welding for dissimilar steel. Sheets which have different thermal properties. Computer simulation was conducted to obtain the off-set position for efficient welding by considering laser power, scanning speed, focal length and basic properties. The result showed that the optimum thermal distribution was obtained when the laser beam was irradiated at $0.05{\sim}0.1$ mm off-set toward the SCP sheet side. The experiment was conducted based on the result of computer simulation to show the same optimum conditions. Optimum conditions were 3KW in laser beam power, 6m/min in scanning speed, -0.5mm in focal position, 0.1mm off-set toward SCP. Microhardness test, tensile test, bulge test, optical microscopy, EDS, and XRD were performed to observe the microstructure around fusion zone and to evaluate the mechanical properties of optimum conditions, The weld zone had high microhardness values by the formation of the martensitic structure. Tensile test measured the strength of welded region by vertical to strain direction and the elongation of welded region by parallel to strain direction. Bulge test showed $52\%$ formability of the original materials. Bead shape, grain size, and martensitic structure were observed by the optical microscopy in the weld zone. Detailed results of EDS, XRD confirmed that the welded region was connected of martensitic structure.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권3호
• /
• pp.267-274
• /
• 1998

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.7-14
• /
• 2004

The lift-off characteristics of the triple flame have been studied experimentally with various mean velocities and concentration gradients using a multi-slot burner, which can control the concentration gradient and the mean velocity independently, Lift-off height, axial maximum velocity, flame temperature, and some other characteristics were examined for methane and propane flame, It was found that minimum values of the lift-off heights exist at a certain concentration gradient for constant mean velocity, and this result implies that the propagation velocity has a maximum value at this condition, OH radical distribution was measured with LIF method and velocity variation along streamline was measured with PlV system. In addition maximum temperature along streamline was measured with CARS system. The intensity of the diffusion flame affects on the propagation velocity of triple flame in the region of very weak concentration gradient.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.286-289
• /
• 2006

Temporal dual gamma drive technology employing the 120Hz refresh rate was developed to enhance the off-axis viewing quality in patterned vertical alignment mode. The color shift ${\Delta}u'v'$ from on-axis to off-axis (60 deg.) for pale orange color, (R,G,B) = (196,124,96), was below 0.01, and the power exponent of gamma curve for off-axis viewing angle (60 deg.) was about 1.8, when the gamma curve for on-axis was set with power exponent of 2.4. The off-axis image distortion index was below 0.180 in contrast to the normal case ${\sim}0.23$. To elevate the response speed of liquid crystal in the intra-frame, the voltage below threshold voltage of liquid crystals was used.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1851-1863
• /
• 1993

A procedure for the prediction of the off-design performance of a gas turbine engine is proposed. The system performance at off-design speed is predicted by coupling the thermodynamic models of a compressor and a turbine. The off-design performance of a compressor is obtained using the stage-stackimg method, while the Ainlay-Mathieson method is used for a turbine. The procedure is applied to a single-shaft gas turbine and its predictability is found satisfactory. The results also show that the net work output increases with the increase of the turbine inlet temperature, while the thermal efficiency is marginal. The maximum thermal efficiency at design point is obtained between the highest pressure ratio and design pressure ratio.

• 수산해양기술연구
• /
• 제34권2호
• /
• pp.231-237
• /
• 1998

Generally, the three position solenoid valve has veen used for the hydraulic steering gear on account of it’s low cost, simplicity in device, etc. But, there is some off-set because of dead-zone which exists in on-off valves. In this paper, we proposed a combined controller which was added an integral controller to an only on-off one in hydraulic steering gear control system used low speed three position solenoid valve. Experimental results show that the off-set is removed, and the number of valve switching is reduced considerable. The validity of proposed method comparing with an only on-off control was proved by the response experiments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.249-252
• /
• 2000

A new Smart rower IC's based on the Partial SOI technology was designed for such applications as mobile communication systems, high-speed HDD systems etc. A new methodology of integrating a 0.8${\mu}{\textrm}{m}$ BiCMOS compatible Smart Power technology, high voltage bipolar device, high speed SAVEN bipolar device, LDD NMOSFET and a new LDMOSFET based on the Partial SOI technology is presented in this paper. The high voltage bipolar device has a breakdown voltage of 40V for the output stage of analog circuit. The optimized Partial SOI LDMOSFET has an off-state breakdown voltage of 75 V and a specific on- resistance of 0.249mΩ.$\textrm{cm}^2$ with the drift region length of 3.5${\mu}{\textrm}{m}$. The high-speed SAVEN bipolar device shows cut-off frequency of about 21㎓. The simulator DIOS and DESSIS has been used to get these results.