• 미생물학회지
• /
• 제53권4호
• /
• pp.265-272
• /
• 2017

다른 탄화수소 분해 방법을 가진 여러 세균을 유류-오염 토양에서 분리하였다. Acinetobacter calcoaceticus SL1은 기름-분산 시험에서 계면활성제-생성능을 보였으며 경유와 n-hexane에 대해 각각 43.6과 54.5%의 유화활성을 나타내었다. 또한 높은 세포 표면 소수성을 가졌는데 이는 탄화수소에 쉽게 부착하여 그것을 분해할 수 있게 한다. 이 균주는 1,000 mg/L의 n-octadecane과 naphthalene을 3일 내에 100% 분해하였으며, 1,000 mg/L의 경유는 7일 동안 72.3%, 그리고 10,000 mg/L로 오염시킨 토양에서는 4주 간 78%를 제거하였다. 다른 분리균주 Bacillus amyloliquefaciens S10과 B. subtilis GO9는 생물계면활성제를 생산할 수 있으며 기름-분산 시험에서 각각 6.34와 2.5 cm직경의 투명대를 형성하였다. 배양 중 그들의 배양 상등액은 표면장력이 74.6 mN/m으로부터 각각 34.4와 33.3 mN/m으로 감소하였으며, 배양 상등액의 critical micelle concentration은 각각 2.0과 5.9%이었다. A. calcoaceticus SL1과 B. amyloliquefaciens S10의 컨소시엄은 10,000 mg/L의 경유를 3일만에 77.8% 분해하였는데 이는 A. calcoaceticus SL1 단독에 의한 것보다 높은 분해능이었다. 만일 이 세균들을 유류-오염 부지에 컨소시엄으로 같이 처리한다면 높은 석유탄화수소 제거율을 나타낼 수 있을 것이다.

• 대한화장품학회지
• /
• 제26권1호
• /
• pp.261-274
• /
• 2000

당류계 계면활성제인 sucrose distearate(S110), sucrose monostearate(S160), POE(20) ethyl glucose stearate(SSE20)과 오일성분인 알칸 계열의 탄화수소 hexane( $C_{6}$), decane( $C_{10}$), tetradecane( $C_{l4}$), octadecane( $C_{8}$)과 squalane (SQ) , liquid paraffin(LP) , octylpalminate(OP) , octylstearate(OS), alkylbenzoate(AB), isostearylbenzoate(ISB)를 사용하여 에멀젼을 제조하였으며 에멀젼 입자의 구조 형태는 광산란법을 이용하여 fractal 차원으로 나타내었다. 에멀젼 입자의 fractal 차원은 오일의 농도 및 탄소수와 오일의 비극성이 증가함에 따라 크게 나타났다. fractal 차원은 대부분 1.7~2.8으로 입자의 구조 형태는 fractal 구조를 이루고 있으나, S110계와 S160계의 Cla 50, LP의 fractal 차원은 3.0~3.2으로 내부 구조가 비교적 조밀한 회합체 구조를 형성하였다. S160계와 S110계의 fractal 차원은 2.I~2.6으로 서로 비슷한 fractal 구조를 형성하며, SSE20의 fractal 차원는 1.5~2.1으로 S160계 및 S110계 보다 덜 조밀한 회합체 구조를 이루는 것으로 나타났다. 입자의 구조 형태는 오일과 계면활성제의 종류에 영향을 받으며 계면활성제의 친수부가 동일하면 비슷한 구조를 형성하였으며 S160의 친수부 구조인 sucrose보다 SSE20의 polyoxyethylene group에 의한 장애효과가 더욱 크게 나타났다.다..

• 복합신소재구조학회 논문집
• /
• 제6권2호
• /
• pp.1-7
• /
• 2015

As energy consumption of building and the reduction of carbon dioxide emissions have been emphasized, phase change materials(PCM) have been introduced as building materials due to its high heat storage performance. Using shape-stabilizing technique, octadecane/xGnP shape-stabilized PCM(SSPCM) can prevent leakage and improve heat storage performance. The objectives of this study are to propose mix design method of concrete mixed with SSPCM and to evaluate mechanical behaviors of the concrete mixed with SSPCM manufactured according to the proposed mix design. Based on the previously reported material test result, the existing mix design of plain concrete(Concrete standard specification, 2009) is modified to consider reduction of strength in concrete due to the addition of SSPCM. To verify the proposed mix design, specimens are fabricated according to the proposed mix design and axial strength tests and three-point loading tests are performed. Test results show that compressive strengths of the tested specimens reach the designed strength even when two different mix ratios of SSPCM are used. From three-point loading tests, flexural stresses decrease as mix ratio of SSPCM increases.

• Journal of Life Science
• /
• 제9권2호
• /
• pp.76-81
• /
• 1999

216 microorganisms which able to degrade wasted lubricant were isolated in the region of contaminated with wated lubricant such automobile repair shops, garages and gas stations in Taejon. Most activated strain among them is selected and used in this research. The microorganism in identified as Acinetobacter lwoffii 16C-1, which shows active growth and hydrocargon utilization withnormal alkane such as tetradecane, hexadecane and octadecane, and do not grow aromatic hydrocargons, cycloalkane, and branched alkane. In addition, A. lwoffii 16C-1 has resistance to heavy metals such as Ba, Li, Cr, and Mn more than 6.4mg/ml, and showed negligible tolerance against antibiotics. Effects of environmental conditions including concentration of wasted lubricnt, pH, NaCl concentration, nitrogen source and phosphate on microorganism growth and emulsification were studied. 2% of wasted lubricant, pH 7.0, 0-1% of NaCl, 0.2% of peptone, and 0.01% of K2HPO4 is turn out to be optimum condition. By the analysis of remaining oils, almost of hydrocarbons added to the media are removed by A. lwoffii 16C-1 at 30$^{\circ}C$ after 2 days of culture, which showed excellent oil degradation characteristics.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.470-474
• /
• 2012

This paper deals with the thermal performances of PCM/diatomite composites for energy saving. The PCM/diatomite composites were prepared by incorporating PCMs in the pores of diatomite to increase form stability of PCMs. In experiment, we used the hexadecane, octadecane and paraffin as PCM and they have each 254.7 J/g, 247.6 J/g and 144.6 J/g of latent heat capacity, and those melting points are $20.84^{\circ}C$, $30.40^{\circ}C$ and $57.09^{\circ}C$, respectively. Thermal properties of PCM/diatomite composites were determined by using DSC. And PCM/diatomite composites were characterized by SEM and FTIR analysis. The results showed that the PCMs are well infiltrated into the structure of diatomite andt he latent heat capacity of PCM/diatomite composites was obtained by 40% of pure PCMs.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.456-466
• /
• 1994

Experimental investigation was made to study the mechanism of fluid and thermal oscillation phenomena of surface-tension driven flow in a cylindrical liquid column heated from above which is the low-gravity floating zone simulated on earth. Hexadecane, octadecane, silicon oil (10cs), FC-40 and water are used as the test liquids. The onset of the oscillatory thermocapillary convection appears when Marangoni number exceeds its criteria value and is found to be due to the coupling among velocity and temperature field with the free surface deformation. The frequency of temperature oscillation decreases with increasing aspect ratio for a given diameter and Marangoni number and the oscillation level increases with Marangoni number. The flow pattern in the liquid column appears either as symmetric or asymmetric 3-D flow due to the oscillatory flow in the azimuthal direction. The free surface deformation also occurs either as symmetric or asymmetric mode and its frequency is consistent with those of flow and temperature oscillations. The amplitude of surface deformation also increases with Marangoni number.

• 한국태양에너지학회 논문집
• /
• 제35권1호
• /
• pp.89-96
• /
• 2015

n-octadecnae based shape stabilized phase change material (SSPCM) was prepared by using vacuum impregnation method. And an exfoliated graphite nanoplate (xGnP) which has high thermal conductivity properties is used as a PCM container. And then we made heat storage concretes which contains SSPCM for reducing heating and cooling load in buildings. In the prepararion process, the SSPCM was mixed to a concrete as 10, 20 and 30wt% of cement weight. The thermal properties and chemical properties of heat storage concrete were analyzed from Scanning electron microscope (SEM), Fourier transformation infrared spectrophotometer (FT-IR), Deferential scanning calorimeter (DSC), Thermogravimetric analysis (TGA) and TCi thermal conductivity analyzer. And we conducted surface temperature analysis of SSPCM and xGnP by using heat plate and insulation mold.

• 접착 및 계면
• /
• 제6권1호
• /
• pp.11-18
• /
• 2005

심물질(core)이 상변화물질(Phase Change Material, PCM)이고, 벽물질(shell)이 멜라민 포름알데히드 수지인 마이크로 캡슐을 제조하였다. 제조된 캡슐의 크기가 아크릴 코팅(acrylic coating)의 물성에 미치는 영향을 알아보기 위하여 PCM 캡슐의 크기를 $3{\sim}25{\mu}m$로 조절하여 제조하였다. 제조된 캡슐의 심물질 함량과 캡슐의 크기는 DSC와 SEM을 이용하여 확인하였다. 아크릴 에멀젼은 butyl acrylate, methyl metacrylate와 acrylic acid를 공중합하여 제조하였다. 제조된 PCM 캡슐과 아크릴 에멀젼을 혼합하여 필름으로 제조하였다. 캡슐의 크기가 작을수록 아크릴 코팅 필름 내에 캡슐이 잘 분산됨을 확인할 수 있었고, 캡슐의 크기가 클수록 필름 표면이 매끄럽지 않음을 관찰할 수 있었다. 필름의 수분 흡수율은 PCM 캡슐의 크기에 큰 영향을 받지 않았지만 필름의 인장 강도와 신율은 캡슐의 크기가 작을수록 증가하였다.

• 생명과학회지
• /
• 제10권3호
• /
• pp.300-306
• /
• 2000

원유 분해능이 강력한 해양균주를 얻고자 유류오염 지역으로부터 crude oil을 탄소원으로 이용하는 수집 종을 분리하였다. 분리된 균주중 원유분해능 및 성장속도면에서 가장 우수한 균주를 선별하여 KCL-2로 명명하였으며, 형태학적, 생화학적 및 생리학적 특성을 조사한 후 Klebsiella sp.로 동정하였다. KCL-2 균주의 원유 분해를 위한 최적 배양조건은 배양온도 27$^{\circ}C$~37$^{\circ}C$였으며 초기 pH는 7.0이였다. 또 한, 이 균주의 성장은 3.0% 염분농도에서 최대의 성장을 보여주어 해양유래의 균주임을 확인하였다. 비 교적 장쇄인 n-alkane 계 탄화수소의 C18~C28의 탄화수소를 탄소원으로 이용하였다. 원유분해시 C18 의 첨가에 의해 균생육 및 원유 분해능이 촉진되는 것으로 나타났다. KCL-2 균주의 유화활성은 32$^{\circ}C$, pH 7.0의 배양조건에서 배양 3일째에 가장 높게 나타났다.

• KSBB Journal
• /
• 제26권1호
• /
• pp.49-56
• /
• 2011

Volatile components of crude fucoidan and its raw material, Undaria pinnatifida sporophylls were identified by GC/MSD analysis, and the effects of a combined method of solvent extraction and drying (hot-air drying or spray drying) on deordorization of fucoidans were examined. The major components of seaweed smell (odor) in crude fucoidan and Undaria pinnatifida sporophylls were identified as alkanes (octadecane, heptadecane, tetradecane) and acids (hexadecanoic acid, oleic acid). Solvent extraction and drying were combined for the deordorization of fucoidans: hot-air drying/deordorization process (HDDP) and spray drying/deordorization process (SDDP). The deordorization effects of solvent extraction using solvents including water, ethanol, and acetone were investigated. Among the tested solvents, ethanol was selected as a deordorization solvent, because the seaweed smell and taste were mostly lowered by ethanol extraction followed by drying. In addition, HDDP and SDDP were compared, showing that SDDP gave higher sensory characteristics than HDDP. When the crude fucoidan was treated by ethanol extraction for 30 min followed by SDDP, approximately 60% of off-flavor components of crude fucoidan was removed based on GC/MSD peak area, and the total sugar and sulfate contents and APTT-anticoagulant activity significantly increased compared to crude fucoidan. In conclusion, SDDP after ethanol treatment was proposed and established as a deordorization process for fucoidan preparation.