• Safety and Health at Work
• /
• v.3 no.4
• /
• pp.278-286
• /
• 2012

Objectives: Authors investigated the pattern of the rate of occupational injuries and illnesses (ROII) at the level of enterprises in order to build a network for exchange of experience and knowledge, which would contribute to workers' safety and health through safety climate of workplace. Methods: Occupational accidents were analyzed at the manufacturing work site unit. A two step clustering process for the past patterns regarding the ROII from 2001 to 2009 was investigated. The ROII patterns were categorized based on regression analysis and the patterns were further divided according to the subtle changes with Mahalanobis distance and Ward's linkage. Results: The first clustering of ROII through regression analysis showed 5 different functions; 29 work sites of the linear function, 50 sites of the quadratic function, 95 sites of the logarithm function, 62 sites of the exponential function, and 54 sites of the sine function. Fourteen clusters were created in the second clustering. There were 3 clusters in each function categorized in the first clustering except for sine function. Each cluster consisted of the work sites with similar ROII patterns, which had unique characteristics. Conclusion: The five different patterns of ROII suggest that tailored management activities should be applied to every work site. Based on these differences, the authors selected exemplary work sites and built a network to help the work sites to share information on safety climate and accident prevention measures. The causes of different patterns of ROII, building network and evaluation of this management model should be evaluated as future researches.

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.206-211
• /
• 2017

Background: Self-reported low back pain (LBP) has been evaluated in relation to material handling lifting tasks, but little research has focused on relating quantifiable stressors to LBP at the individual level. The National Institute for Occupational Safety and Health (NIOSH) Composite Lifting Index (CLI) has been used to quantify stressors for lifting tasks. A chemical exposure can be readily used as an exposure metric or stressor for chemical risk assessment (RA). Defining and quantifying lifting nonchemical stressors and related adverse responses is more difficult. Stressor-response models appropriate for CLI and LBP associations do not easily fit in common chemical RA modeling techniques (e.g., Benchmark Dose methods), so different approaches were tried. Methods: This work used prospective data from 138 manufacturing workers to consider the linkage of the occupational stressor of material lifting to LBP. The final model used a Bayesian random threshold approach to estimate the probability of an increase in LBP as a threshold step function. Results: Using maximal and mean CLI values, a significant increase in the probability of LBP for values above 1.5 was found. Conclusion: A risk of LBP associated with CLI values > 1.5 existed in this worker population. The relevance for other populations requires further study.

• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.136-142
• /
• 2003

This study is planned to investigate the attitude toward the safety and health management of contractor company. Under the contract based production system, all of activities including safety and health management in the contractor company are depended upon the contract. How to make contract influence the worker's health of contractor company. Worker's health of contractor company can be protected by efforts of company of contract-out and contractor company, especially their safety managers. The modelling of the effective safety and health management system for contractor company should consider the need of safety manager of each company and employer of contractor company. Data is collected from safety managers of 3 contract out compaines as electronic and electrical manufacturing industry and 55 safety manager, 57 employers of their contractor compaines using self administered survey with structured questionnaire. The most of all respondents want to support from the contract out compaines. The most important items supported from contract out company is the information based on the safety information network between each company. Safety manager and employer of contactor company also itemized safety education and training in the supporting system from contract out company. These results can be generalized to survey on the other industries.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.3
• /
• pp.280-291
• /
• 2020

Objectives: Hazard classification is a controversial issue in the new MSDS system in which chemical companies have to prepare and submit MSDS for chemicals that they manufacture or import to the competent authorities according to the amended Occupational Safety and Health Act. The aim of this study is to suggest how to apply and manage harmonized hazard classification criteria and results by investigating current hazard classification systems and trends. Methods: The domestic issues about different hazard classification criteria and results were investigated by reviewing the literature and business outcomes regarding KOSHA. We also checked official and unofficial reports from the UN to understand international discussion about the topic. Chemical hazard classification results from agencies providing chemical information were analyzed to compare a harmonized rate between classifications. Furthermore, a field survey of a few chemical companies was conducted. Results: Under the related competent authorities, an integrated standard proposal was developed to harmonize the domestic hazard classification criteria. Although harmonized chemical information is strongly needed, we recognized the uncertainty and difficulty of harmonized hazard classification from the UN global list project review. In practice the harmonization rate of the classification was generally low between the classification in KOSHA, MoE, and EU CLP. Among hazard classes, health hazards largely led the disharmony. The field survey revealed a change of perception that the main body of chemical information production is manufacturers. Approaches and solutions about hazard classification issues differed depending on business size, types of chemical handling, and other factors. Conclusions: We proposed reasonable ways by time and step to apply hazard classification in the new MSDS system. Chemical manufacturers should make and offer chemical information including responsible hazard classifications. The government should primarily accept these classifications, evaluate them by priority, and support or supervise workplaces in order to communicate reliable chemical information.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.4
• /
• pp.322-334
• /
• 2007

This study covers the investigation of the actual condition in the workplace to produce plastics products using synthetic resins and the investigation on the trends amount of the domestic production of thermoplastic resins. To analyze the monomers included in thermoplastic resins frequently used in the workplace, we analyzed thermal characteristics for test compounds using thermogravimetric analysis and did the qualitative analysis using Pyrolyzer GC-MSD & TDS GC-MSD. And then we classified the health hazard of monomers based on GHS classification criteria using information toxicity & carcinogenicity. The number of the workplace to produce plastics products among all domestic manufacturers of 73,884 was 4,391 (5.94%). The number of workers to produce plastics products among all workers of 2,522,750 in all domestic manufacturers was 104,971 (4.16%). The amount of production per year for thermoplastic resins is in the order of PP, HDPE, LDPE, PVC, ABS, PS and such compounds was producing over 1 Million ton per year each. The classification result based on GHS classification criteria for 22 main compounds included thermoplastic resins says 2 compounds of acrylonitrile, naphthalene are in Acute oral category 3 and benzene is in Acute dermal category 1. The classification results of health hazard of carcinogenicity based on IARC & ACGIH carcinogen classification says 2 compounds of benzene, vinyl chloride are in category 1A (known to be human carcinogens).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.4
• /
• pp.384-392
• /
• 2013

Objective: This study inspected incident cases, legal control levels, and GHS(Globally Harmonized System of Classification and Labeling of Chemicals) classification results of strong acids such as hydrogen fluoride, hydrogen chloride, nitric acid, and sulfuric acid, which have been responsible for many recent chemical accidents. As a result, it is deemed necessary for legal control levels of these strong acids to be revised and GHS classification be managed nation-wide. Methods: This study inspected incident cases and legal control levels for strong acids such as hydrogen fluoride, hydrogen chloride, nitric acid, and sulfuric acid. The study analyzed and compared chemical information status and GHS classification results. Results: There were 76 domestic incidents involving strongly acidic hazardous materials over the five years between 2007 and 2011. They include 37 leakage incidents(46.7%) within a workplace, 30 leakage incidents(39.5%) during transportation, and nine leakage incidents(13.8%) following an explosion. The strongly acidic materials in question are defined and controlled as toxic chemicals according to the classes of Substances Requiring Preparation for Accidents, Managed Hazardous Substance, Hazardous Chemical(corrosive) as set forth under the Enforcement Decree of the Toxic Chemicals Control Act and Rules on Occupational Safety and Health Standards of Occupational Safety and Health Act. Among them, nitric acid is solely controlled as a class 6 hazardous material, oxidizing liquid, under the Hazardous Chemicals Control Act. The classification results of the EU ECHA(European Chemicals Agency) CLP(Commission Regulation(EC) No. 790/2009 of 10 August 2009, for the purposes of its adaptation to technical and scientific progress, Regulation(EC) No 1272/2008 of the European Parliament and of the Council on classification, labeling and packaging of substances and mixtures) and NIER (National Institute of Environmental Research) are almost identical for the three chemicals, with the exception of sulfuric acid. Much of the classification information of NITE (National Institute of Technology and Evaluation) and KOSHA(Korea Occupational Safety and Health Agency, KOSHA) is the same. NIER provides 12(41.4%) out of 29 classifications, as does KOSHA.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.158-165
• /
• 2014

The statistics of occupational injuries and illnesses is one of the most important indicators of worker's safety and health in the field of occupational safety and health. The conventional statistics was produced without consideration of gender difference. This study was planned to investigate the difference of occupational injuries and illnesses by gender because that recently female workers was increased through the change of industrial structure such as from manufacturing dominated to service dominated structure. Statistics of occupational injuries and illnesses collected by workmen's compensation insurance system that have no information about gender composition of population. Economically active population survey was used to calculated the rate of occupational injuries and illnesses by gender. The distribution of estimated rate of occupational injuries and illnesses by industry, occupation and the type of accident were different between male and female employees, but those by the size of enterprise, age of the injured, the duration of the first recuperation, and job tenure were similar between male and female employees. This study has shown that gender sensitive approach may be applied to policy of occupational safety and health because that gender neutral perspective may not discover the fact of gender specific problems.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.1
• /
• pp.18-34
• /
• 2018

Objectives: This study aims to identify and solve problems in the consistency, procedural justification, effectiveness, and other matters concerning approaches to occupational safety and health legislation, administrative rules, and administrative guidelines. Methods: In this study of policy on the industrial safety and health law of Korea, problems were raised based on important information on the approach to occupational safety and health legislation and administrative guidelines such as notices, ordinances, and instructions, as well as on their interpretation and operation standards. Secondly, based on the identified problems in the occupational safety and health law policy, core practical methods to present improvement directions for occupational safety health policy in Korea were sought. Results: It is absolutely necessary to actively promote the infrastructure for occupational safety and health by developing and disseminating notices, guidelines, and manuals that act as contact points between laws and the field in various ways at the administrative institution level. In addition to sanctions, efforts to systematically guide and promote complex professional matters must be supported. Efforts should be made to strengthen administrative expertise so that administrative authorities can secure professional authority and fully enforce legal policies according to the purpose of legislation. In order to ensure the effectiveness of occupational safety and health law policies, it is necessary to shift the focus of the legal policy toward confirming and guiding substantial compliance with legal standards. Conclusions: As a result of the above efforts, when reliable occupational safety and health law policy is implemented, the understanding and acceptance of the legal policy for the administrative object will be increased, and the safety and health management of the enterprise will be maximized to its full extent.

• Safety and Health at Work
• /
• v.13 no.1
• /
• pp.112-116
• /
• 2022

Background/Aims: The Gachon Regional Occupational Cohort Study (GROCS) is a large-scale longitudinal study of occupational safety and health data (covering Work Environment Monitoring, Workers' Health Surveillance, and Occupational Health Service) conducted by the Gachon University Gil Medical Center (GUGMC) in Incheon, Republic of Korea. We conducted GROCS to identify the health effects of workers' occupational risks, behavior, socioeconomic status, and life style. Methods: The GROCS includes data from Work Environment Monitoring, Workers' Health Surveillance, and Occupational Health Service. The baseline year for all data collection was 2018. Work Environment Monitoring was conducted in 240 companies located in Incheon. General Health Examination and Special Health Examination were performed on 32,725 and 9,504 workers, respectively. Occupational Health Services were provided to 16,883 workers in 171 companies. These data have been collected and operated at an external data management institution and were provided as a retrospective cohort after removing personal identification information. Results: In 2018, the total number of companies was 2,854, among which which 488 special Health Examination, 171 Work Environment Monitoring, and 240 Occupational Health Service. The proportion of companies undergoing Special Health Examination was 17.1%, the proportion of companies undergoing Work Environment Monitoring was 8.4%, and the proportion of Companies undergoing Occupational Health Service was 6.0%. Conclusion: GROCS expects researchers to utilize its useful and reliable resource for occupational health and surveillance with for academic or political purposes to lead to improved workers' health and working environment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.3
• /
• pp.254-260
• /
• 2007

Trichloroethylene(TCE) is widely used as a degreasing solvent in workplaces. TCE is primarily toxic to the nervous system, however, systemic disorder like Stevens-Johnson syndrome has been recently reported in small-scale factories, where the government has had limited information of chemical use. A survey was performed to investigate the actual condition of using TCE and to provide practical information to occupational health service agencies and professionals. This survey was carried out on 103 factories out of 430 factories which were conducted periodic work environment measurement for TCE. Degreasing was the most popular reason for using TCE in Korea, which reached to 94%. TCE was also used as a solvent for rubber in the coating or molding process, and adhesives in the bonding process. Metal fabrication was the most common as 23%, followed by assembling automobile parts (17%), and machinery (12%). Workers exposed to TCE during full-shift were 52% while 48% were exposed during short period of the shift or intermittently. Manual or semi-automatic work occupied 87% while automatic work was just 13%. Though automatic work by a closed system was generally lower exposed to TCE, compared to manual work, it can cause a high exposure when the maintenance system is improper. Semi-automatic work especially like open-top degreasing process can cause a high exposure when local exhaust system with condensing and refrigerating coils in the degreaser does not work well. In conclusion, the survey showed nationwide status of TCE exposure in various aspects. It can be used to monitor workplaces and workers exposed to TCE to prevent occupational diseases.