• Journal of Environmental Health Sciences
• /
• v.43 no.5
• /
• pp.438-445
• /
• 2017

Objectives: The purpose of this study was to develop exposure factor data for the Korean child population, with a specific focus on behavior characteristics such as hand-to-mouth and object-to-mouth and an analysis of influential factors. Methods: We divided environments into two places, which were house/indoor and nursery. A total of 400 children (house/indoor) and a total of 162 children (nursery) were recruited from the cities of Seoul, Incheon, Daegu, and Gwangju. The children were divided into two groups. We conducted direct measurement by using one hour of videotaping alongside questionnaire surveys. This was performed to calculate behavior rates, such as how many children perform hand-to-mouth and object-to-mouth behaviors. Results: The respective average frequencies of hand-to-mouth and object-to-mouth were $0.8{\pm}2.23$ and $0.82{\pm}2.64contacts/hr$ for house/indoor. The respective average frequencies of hand-to-mouth and object-to-mouth were $2.87{\pm}4.63$ and $1.47{\pm}3.84contacts/hr$ in the nursery group. For the mouthing participants, the average frequencies of hand-to-mouth and object-to-mouth were 3.31 and 3.20 contacts/hr in house, and 4.80 and 3.26 in nursery. Compared to other countries such as the USA, the frequencies of hand-to-mouth and object-to-mouth behaviors found in this study were relatively lower. Conclusions: Children have the potential for exposure to toxic substances through non-dietary ingestion pathways by mouthing objects or their fingers. In this study, the mouthing frequency was relatively lower than that found in Western countries. This can be explained that mouthing behaviour may be affected by culture and lifestyle characteristics.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.3
• /
• pp.203-215
• /
• 2010

This study is an overview of toxicities and measurement techniques of ultrafine particles (UFPs), and their exposure controls. UFPs are ubiquitous in many working situations. Exposure to UFPs is possibly causing adverse health symptoms including cardio-respiratory disease to humans. In order to measure exposure levels of airborne UFPs, there are current available measurement guidelines, instruments and other techniques (i.e. contour mapping, control banding). However, these risk assessment techniques including measurement techniques, controls and guidelines are dependent on background levels, metrics (e.g. size, mass, number, surface area, composition), environmental conditions and controls. There are no standardized measurement methods available and no generic and specific occupational exposure standards for UFPs. It is thought that there needs to be more effort to develop Regulations and Exposure Standards for generic UFPs should be based on more exposure data, health surveys, toxicological data and epidemiological data. A carefully considered hierarchy of controls can also reduce the maximum amount of airborne UFPs being emitted from diverse sources in industries.

• Safety and Health at Work
• /
• v.4 no.3
• /
• pp.156-159
• /
• 2013

Background: Cardiac pacemakers are known to be susceptible to strong electromagnetic fields (EMFs). This in vivo study investigated occurrence of electromagnetic interference with pacemakers caused by common environmental sources of EMFs. Methods: Eleven volunteers with a pacemaker were exposed to EMFs produced by two mobile phone base stations, an electrically powered commuter train, and an overhead high voltage transmission lines. All the pacemakers were programmed in normal clinically selected settings with bipolar sensing and pacing configurations. Results: None of the pacemakers experienced interference in any of these exposure situations. However, often it is not clear whether or not strong EMFs exist in various work environments, and hence an individual risk assessment is needed. Conclusions: Modern pacemakers are well shielded against external EMFs, and workers with a pacemaker can most often return to their previous work after having a pacemaker implanted. However, an appropriate risk assessment is still necessary after the implantation of a pacemaker, a change of its generator, or major modification of its programming settings.

• Annals of Occupational and Environmental Medicine
• /
• v.34
• /
• pp.19.1-19.9
• /
• 2022

Background: It is widely known that carbon dioxide (CO₂) arc welding generates carbon monoxide (CO). However, to the best of our knowledge, no case reports have been published regarding CO poisoning in CO₂ arc welders. Therefore, we aimed to report a case of CO poisoning-induced encephalopathy in a CO₂ arc welder in the Republic of Korea to inform about the dangers of CO exposure among CO₂arc welders. Case presentation: A 40-year-old man working as a CO₂ arc welder for 15 years visited a local hospital with a tremor, involuntary urination, and speaking gibberish, on April 9, 2019. He stated that he had intermittent headache and forgetting symptoms for the last 5 years, and had been lost on the way to work several times. On April 9, 2019, he was diagnosed with CO poisoning-induced encephalopathy through brain magnetic resonance imaging. He received hyperbaric oxygen therapy, and some of his symptoms improved. According to the exposure assessment of his work environment, he was continuously exposed to high concentrations of CO for 15 years while operating CO₂ arc welding machines. Conclusions: After evaluating the patient's work environment and evaluating his medical history, we concluded that his encephalopathy was caused by CO exposure during CO₂ arc welding. Thus CO₂ arc welders must be aware of the risk of CO poisoning and strive to avoid CO exposure.

• Safety and Health at Work
• /
• v.13 no.3
• /
• pp.357-363
• /
• 2022

Background: Refractory ceramic fibers (RCFs) are a suspected carcinogen but have been widely used as insulations. Depending on the temperature, RCFs can transform into crystalline SiO₂, which is a carcinogen that can be present in the air during bulk RCF handling. This study analyzed the physicochemical and morphological characteristics of RCFs at high temperatures and determined the exposure levels during the semiconductor scrubber maintenance. Methods: Sampling was conducted at a company that manufactures semiconductor scrubbers using RCFs as insulation. Bulk RCF samples were collected both before and after exposure to a scrubber temperature of 700℃. Airborne RCFs were collected during scrubber maintenance, and their characteristics were analyzed using microscopes. Results: The components of bulk RCFs were SiO₂ and Al₂O₃, having an amorphous structure. Airborne RCFs were morphologically different from bulk RCFs in size, which could negatively affect maintenance workers' health. 58% of airborne RCFs correspond to the size of thoracic and respirable fibers. RCFs did not crystallize at high temperatures. The exposure caused by airborne RCFs during the scrubber frame assembly and insulation replacement was higher than the occupational exposure limit. Conclusion: Workers conducting insulation replacement are likely exposed to airborne RCFs above safe exposure limits. As RCFs are suspected carcinogens, this exposure should be minimized through prevention and precautionary procedures.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.1
• /
• pp.27-34
• /
• 2013

Objectives: The purpose of this study is to calculate the worker-DNEL (Derived No Effect Level) values using the REACH guidance and compare the calculated DNELs with existing Korea occupational exposure limits (KOELs) for evaluation of the applicability of the worker-DNELs as provisional occupational exposure limits for chemicals that are not established KOELs in the workplace. Methods: The worker-DNELs for 46 chemicals among 113 hazardous substance requiring management were calculated using the REACH guidance, and a paired t-test was performed to see if there is any statistical difference between two lists (worker-DNELs vs KOELs). The ratios of KOELs over worker-DNELs were also calculated to compare the overall levels of two lists using the geometric means method. Results: The calculated worker-DNELs for 46 chemicals ranged from 0.001 to $329mg/m^3$ (GM= 6.9, GSD = 10.8), and appeared to be a significant difference between the worker-DNELs and the KOELs (p < 0.01). In addition, the ratios of KOELs over worker-DNELs ranged from 0.3 to 394 times (GM = 10.2, GSD = 3.9), indicating that the worker-DNELs were, on average, 27 times lower than the KOELs. Conclusions: Therefore, the study results show that the calculated worker-DNELs can be applied and used as provisional occupational exposure limits in the workplace in order to reduce worker exposures to chemicals and health risks, and manage potential worker exposures based on the precautionary principle through comprehensive chemical risk assessment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.2
• /
• pp.141-158
• /
• 2019

Objectives: An adverse outcome pathway is a biological pathway that disturbs homeostasis and causes toxicity. It is a conceptual framework for organizing existing biological knowledge and consists of the molecular initiating event, key event, and adverse output. The AOP concept provides intuitive risk identification that can be helpful in evaluating the carcinogenicity of chemicals and in the prevention of cancer through the assessment of chemical carcinogenicity predictions. Methods: We reviewed various papers and books related to the application of AOPs for the prevention of occupational cancer. We mainly used the internet to search for the necessary research data and information, such as via Google scholar(http://scholar.google.com), ScienceDirect(www.sciencedirect.com), Scopus(www.scopus. com), NDSL(http: //www.ndsl.kr/index.do) and PubMed(http://www.ncbi.nlm.nih.gov/pubmed). The key terms searched were "adverse outcome pathway," "toxicology," "risk assessment," "human exposure," "worker," "nanoparticle," "applications," and "occupational safety and health," among others. Results: Since it focused on the current state of AOP for the prediction of toxicity from chemical exposure at work and prospects for industrial health in the context of the AOP concept, respiratory and nanomaterial hazard assessments. AOP provides an intuitive understanding of the toxicity of chemicals as a conceptual means, and it works toward accurately predicting chemical toxicity. The AOP technique has emerged as a future-oriented alternative to the existing paradigm of chemical hazard and risk assessment. AOP can be applied to the assessment of chemical carcinogenicity along with efforts to understand the effects of chronic toxic chemicals in workplaces. Based on these predictive tools, it could be possible to bring about a breakthrough in the prevention of occupational and environmental cancer. Conclusions: The AOP tool has emerged as a future-oriented alternative to the existing paradigm of chemical hazard and risk assessment and has been widely used in the field of chemical risk assessment and the evaluation of carcinogenicity at work. It will be a useful tool for prediction, and it is possible that it can help bring about a breakthrough in the prevention of occupational and environmental cancer.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2001.10a
• /
• pp.121-122
• /
• 2001

According to the epidemiological studies in chromium workers, hexavalent chromium is associated with the risk of lung cancer. Genotoxicity such as chromosome aberration, and cellular oxidative damages by reactive oxygen species produced by hexavalent chromium exposure may play an important role in the carcinogenesis process. We investigated the availabilities of several kinds of biological markers to assess the genotoxicity and oxidative damages from chromium exposure in Korean chromium plating workers.(omitted)

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.230-239
• /
• 2018

Objective: The purpose of this study is to identify the kinds and exposure levels of health hazards in the metalworking process in relation to acute poisoning accidents caused by methanol in 2016. Methods: The number of industries, workplaces, exposed workers, regional distribution, and exposure level of health hazards in metalworking process were investigated based on employee exposure assessment database provided by KOSHA (the Korea Occupational Safety and Health Agency), which was collected from workplace hazard evaluation programs in Korea. Exposure metrics for methanol were assessed by RCR (risk characterization ratio). Results: The numbers of processes, workplaces, and exposed workers of metalworking, which include CNC (computer numerical control) were 25, 14,405, and 169,102 respectively. The numbers of samples of chemical hazards including methanol were 91,325, and it was found that workers in metalworking were exposed to 249 kinds of chemical hazards. There were 16 kinds of special controlled substances including beryllium. It is estimated that the number of workplaces involving CNC process was 2,537, and the number of exposed workers was 27,976. In CNC process, the total number of workplaces handling methanol was 36, and 298 workers were estimated to be exposed. There was no exceeded that surpassed the OEL and 49% of samples were below the limit of detection. Methanol exposure concentrations in Gyeonggido Province were statistically significantly higher than in other areas (p <0.0001). Conclusions: In the metalworking process including CNC, there is exposure to a wide variety of health hazards. There was no sample exceeding the OEL for methanol. Therefore, it is necessary to recognize the limits of the employee exposure assessment system and urgently improve measures to prevent the occurrence of events like methanol poisoning.

• Journal of Environmental Health Sciences
• /
• v.45 no.2
• /
• pp.173-185
• /
• 2019

Objectives: The objectives of this study are to evaluate the accuracy and precision of exposure model ECETOC TRA v.3.1 by comparing model predictions with repeated exposure measurements in Korean workplaces and to investigate the applicability of ECETOC TRA to Korean workplace exposure assessment in K-REACH. Methods: Measured values and work conditions for 14 kinds of chemicals collected from exposure field surveys conducted at 10 companies in Korea were utilized for this study. All possible process categories (PROCs) considered to be relevant to each work process classification were selected and applied to ECETOC TRA as major determining parameters. In order to quantify the accuracy of the model, the lack of agreement (bias, relative bias, precision) was calculated and the risk ratios for each exposure situation between estimated and measured were also compared. Results: The estimated values varied between five and 25 times according to the PROCs for all exposure situations (ESs) based on tasks/chemicals. The results showed that most of the estimated values were below the measured values, and just 13 of 53 tasks were above the measured values. The overall bias and precision were $-2.91{\pm}1.62$ with ECETOC TRA, and we found that ECETOC TRA showed a low level of conservatism when applied to Korean workplaces, similar to previous studies. Conclusions: This study demonstrates that the existed PROC codes have limitations in fully covering various ESs in Korea. In order to improve the applicability of ECETOC TRA in K-REACH, the addition of new PROCs for Korean industries are necessary.