• Journal of Information Science Theory and Practice
• /
• v.5 no.3
• /
• pp.61-70
• /
• 2017

This study investigated the use of e-journals by health researchers in the Nigerian Institute of Medical Research (NIMR). A descriptive survey method was adopted for the study and a questionnaire was used for data collection. The study population was comprised of fifty-four (54) respondents who are health researchers in the institute. The data collected were presented and analyzed using tables, frequency distribution, simple percentages, and charts. The result of the study revealed that all the respondents are aware of the availability of e-journals and attest to making use of them. The study revealed that electronic journals were mostly used for the purpose of conducting research work and the PDF format was preferred for downloading e-journals. However, it was observed that low Internet connectivity and intermittent electricity supply constitute a major obstacle to the use of e-journals. The study, therefore, recommended that the institute's management invest more resources on network connectivity, particularly its bandwidth, and ensure reliable power supply.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.71-84
• /
• 2000

The objective of this research is to investigate the relation between the parenting stress, recognized by the working mothers, and associated variables systematically. For the purpose, I analyzed the demographic of the working mothers and surrounding variables at the levels of microsystem, mesosystem, and macrosystems, to relate with respect to the parenting stress problem. The research composes the sample space of working mothers having children less than 6 years old. The data were analyzed by the statistical method based on frequency, percentile, Pearson's correlation, hierachical and multiple regression. The main results of the research can be summarized as follows: According to the independent effects of diverse ecological systematic variables, there are shown that 11 independent variables can describe about 55.6% of the parenting stress of the working mothers. Among these variables, 'satisfaction about the child care' is the most significant factor, which covers about 34.5%. Additionally, the next significances are observed from such variables as 'temperament of children' (8.2%), 'satisfaction of marriage' (5.1%), 'support of spouse' (1.5%), 'level of education' (1.9%) and so on. In conclusion, it is strongly recommended to compensate and restructure the child care systems more systematically, to afford more reliable parenting environment to the dual earner mothers and fathers and children simultaneously.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.14 no.1
• /
• pp.30-37
• /
• 2008

Purpose: This study proposed to examine the effects of a blended-learning orientation program executed for nursing students' clinical practice. Method: The participants were 61 nursing students in the experimental group and 57 in the control group. For the experimental group, a blended-learning orientation program was executed by e-learning (on-line) and lecture-led training (off-line) from two-week before the start of clinical practice in medical-surgical nursing. For the control group, orientation was given in the traditional lecture-led training by distributing printed materials before clinical practice. A pre-test was conducted on the experimental and control group before clinical practice, and a post-test was conducted after two-week of clinical practice in order to examine the effects of the orientation program. Results: After two-week of clinical practice, differences were observed between the experimental group and the control group in adaptation to clinical practice (F=10.242, p=.002), communication skills (F=4.305, p=.040) and clinical competence (F=6.823, p=.010). Conclusions: The blended-learning orientation program enhanced nursing students' adaptation to clinical practice, improved their communication skill and increased their clinical competence. Accordingly, it is recommended to develop and apply practical education using blended-learning in the area of nursing science.

• Journal of Korean society of Dental Hygiene
• /
• v.21 no.1
• /
• pp.17-25
• /
• 2021

Objectives: Interdental toothbrushes are made and sold in various design types and brush thicknesses. However, there is little research on which type of interdental toothbrush currently manufactured and sold on the market is the most effective in eliminating interdental plaque. Therefore, this study aims at comparing the elimination rate of artificial dental plaque between reciprocating- and rotating-types of interdental toothbrush based on the frequency of application and thickness of brush. Methods: This study focused on the effective management of dental plaque using interdental toothbrush, a recommended item for personal dental hygiene. The method was as follows: artificial dental plaque coloring was applied to the distal surface of artificial tooth #46 and the mesial surface of #47. The area was subject to reciprocal movement three and six times to eliminate artificial plaque. Results: The results showed that using a 0.7mm rotating interdental toothbrush, on the proximal surface of each molar, the elimination rates were: on the distal surface of #46, upon three applications 40.24%, upon six applications 30.41%; on the mesial surface of #47, upon three applications 44.52%, upon six applications 29.72%. Conclusions: These results showed that for rotating-type interdental toothbrushes, a high dental plaque elimination rate was observed even though many reciprocal movements were not performed.

• Journal of the Korean Ceramic Society
• /
• v.43 no.9 s.292
• /
• pp.544-551
• /
• 2006

The sealing technique between a glass tube and a copper heat pipe in an evacuated tube solar collector is studied. In this study two different sealing techniques, such as flame method and furnace firing, are examined. After the sealing of a copper to a glass, the oxidation state of the copper and its bonding morphology were examined by SEM and XRD. Its oxidation was retarded by coating of borate solution on the copper, and $Cu_2O(cuprite)$ turned into CuO(tenorite) with increase in a firing temperature and firing time. Porous structure was found in the oxide layer when CuO formed. The best sealing morphology was observed when the thickness of the oxidation layer was less than $20{\mu}m$. The sealing technique performed in a furnace was promising and the satisfactory result was obtained when the sample was fired at $950^{\circ}C$ for 5 min under $N_2$ atmosphere. Annealing procedure is recommended to remove the stress left at the bonding zone.

• Journal of Sensor Science and Technology
• /
• v.17 no.5
• /
• pp.329-337
• /
• 2008

Simple, small and portable oxygen sensors were fabricated by tape casting technique. Yttria stabilized zirconia containing cordierite ceramics (YSZC) were used as a porous diffused layer of oxygen in pumping cell. Yttria stabilized zirconia (YSZ) solid electrolyte, YSZC porous diffusion layer and heater-patterned ceramic sheets were prepared by co- firing method. Limit current characteristics and the linear relationship of current to oxygen concentration were observed. Viscosity variation of the slurries both YSZ and YSZC showed a similar behavior, but micro pores in the fired sheet were increased with increasing of the cordierite amount. Molecular diffusion was dominated due to the formation of large pores in porous diffusion layer. The plateau range of limit current in porous-type oxygen sensor was narrow than the one of aperture-type oxygen sensor. However limit current curve was appeared in porous-type oxygen sensor even at the lower applied voltage. The plateau range of limit-current was widen as increasing the thickness of porous diffusion layer of the YSZ containing cordierite. Measuring temperature of $600{\sim}650^{\circ}C$ was recommended for limit-current oxygen sensor. Porous diffusion layer-type oxygen sensor showed faster response than the aperture-type one and was stable up to 30 days running without any crack at interface between the layers.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.7
• /
• pp.5-12
• /
• 2021

The reliable seismic stability evaluation of the natural slopes and geotechnical structures has become a critical factor of the design. Pseudo-static or permanent displacement methods are typically employed to evaluate the seismic slope performance. In both methods, the effect of input ground motion on the sliding surface is ignored, and failure surface from the limit equilibrium method is used. For the assessment of the seismic sensitivity of failure surface, two-dimensional non-linear finite element analyses are performed. The performance of the finite element model was validated against centrifuge measurements. A parametric study with a range of input ground motion was performed, and numerical results were used to assess the influence of ground motion characteristics on the sliding surface. Based on the results, it is demonstrated that the characteristics of input ground motion have a significant influence on the location of the seismically induce failure surface. In addition to dynamic analysis, pseudo-static analyses were performed to evaluate the discrepancy. It is observed that sliding surfaces developed from pseudo-static and dynamic analyses are different. The location of the failure surface change with the amplitude and T_m of motion. Therefore, it is recommended to determine failure surfaces from dynamic analysis

• Food Science of Animal Resources
• /
• v.38 no.1
• /
• pp.172-179
• /
• 2018

One of the critical limitations to use of bacteriocins produced by lactic acid bacteria as a substitute for chemical antibiotics is the narrow spectrum of their antibacterial activity. The aim of present study was isolation and molecular identification of bacteriocin-producing enterococci with broad antibacterial spectrum. Bacteriocin-producing bacteria were isolated from native dairies in Kerman. Bacteriocins were purified by ammonium sulfate method and the effects of them were investigated on different strains of bacteria. Also, the effects of pH and heat on produced bacteriocins were investigated. High level bacteriocin-producing isolates were identified based on molecular tests. A total of 15 strains of bacteriocin-producing Enterococcus were isolated initially. Enterococcus faecium C-2 and Y-1 strains produced bacteriocins with the highest antibacterial effect. The bacteriocins were stable in pH ranges from 2 to 12 and their antibacterial activity was maintained after autoclave treatment. The maximum bactericidal effect was observed against Listeria monocytogenes and Pseudomonas aeruginosa. In conclusion, use of these bacteriocins as a substitute for chemical antibiotics is recommended.

• Journal of Veterinary Clinics
• /
• v.36 no.5
• /
• pp.292-295
• /
• 2019

A 2-year-old, 440 kg, thoroughbred gelding showed a lameness grade of 3 out of 5, as well as swelling and heating on the proximal interphalangeal joint (PIPJ). Periarticular new bones due to the arthritis were observed on performing radiography and ultrasonography. PIPJ arthrodesis was performed under general anesthesia. With the PIPJ open, the articular cartilage was removed by using curette, chisel, and mallet. Arthrodesis was performed with a PIP plate and two additional transarticular cortex screws inserted in lag fashion. A cast was placed over the limb distal from the proximal metatarsal bone. At 6 months after surgery, complete union of the PIPJ was confirmed by radiography, and the incision site was well closed. Based on the outcome, a PIP plate with two additional transarticular cortex screws inserted in lag fashion is recommended as a method for treating osteoarthritis of the PIPJ in horses.

• Journal of radiological science and technology
• /
• v.44 no.3
• /
• pp.231-237
• /
• 2021

The ongoing coronavirus disease 2019 (COVID-19) pandemic has highlighted the importance of hospital hygiene and infection control in hospital settings. To raise hygiene awareness among ultrasound technicians, we evaluated the hygiene status of an ultrasound room, in comparison with that of objects used in daily life. Using the swab method, the following surfaces were examined: eight surfaces in the ultrasound room including the ultrasound probes (convex, linear, sector, 3D), ultrasound track ball, ultrasound keyboard, ultrasound gel (sealed and in use) and pillow as well as four surfaces of everyday objects including subway handles, common computer keyboards, common computer mouse, and cell phones. The streak plate technique was used for inoculation into media, which was observed for the formation of bacterial colonies following incubation for 24 h. Six bacterial strains were detected from objects used in the ultrasound room, including methicillin-resistant Staphylococcus aureus. Four strains of bacteria were detected on surfaces of everyday objects. The equipment and accessories used in an ultrasound room can act as vehicles for infecting patients. Establishment of standardized hygiene protocols and periodic training of the staff are recommended to avoid cross-infection.