• Journal of Korea Water Resources Association
• /
• v.41 no.4
• /
• pp.379-394
• /
• 2008

Recently, extreme precipitation events beyond design capacity of hydraulic system have been occurred and this is the causes of failure of hydraulic structure for flood prevention and of severe flood damage. Therefore it is very important to understand temporal and spatial characteristics of extreme precipitation events as well as expected changes in extreme precipitation events and distributional characteristics during design period under future climate change. In this paper, climate change scenarios were used to assess the impacts of future climate change on extreme precipitation. Furthermore, analysis of future extreme precipitation characteristics and I-D-F analysis were carried out. This study used SRES B2 greenhouse gas scenario and YONU CGCM to simulate climatic conditions from 2031 to 2050 and statistical downscaling method was applied to establish weather data from each of observation sites operated by the Korean Meteorological Administration. Then quantile mapping of bias correction methods was carried out by comparing the simulated data with observations for bias correction. In addition Modified Bartlett Lewis Rectangular Pulse(MBLRP) model (Onof and Wheater, 1993; Onof 2000) and adjust method were applied to transform daily precipitation time series data into hourly time series data. Finally, rainfall intensity, duration, and frequency were calculated to draw I-D-F curve. Although there are 66 observation sites in Korea, we consider here the results from only Seoul, Daegu, Jeonju, and Gwangju sites in this paper. From the results we found that the rainfall intensity will be increased and the bigger intensity will be occurred for longer rainfall duration when we compare the climate conditions of 2030s with present conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1271-1279
• /
• 2013

In this paper, a study on the prediction method of basic wind speed at the construction site of long-span bridge using short-term measurements was conducted. To determine the basic wind speed in the wind resistant design for the long-span bridge away from the weather station, statistical analysis of long-term data at site is required. Wind observation mast was installed at site, and short-term measurements were gathered and the correlation analysis between the site and the station was done using regression analysis and MCP(Measure-Correlate-Predict). The long-term wind data of the site was obtained from correlation formula after topographical revision of long-term data of the station. And basic wind speed could be estimated by extreme probability distribution analysis. The research results show that the wind speed by regression analysis is predicted lower than by MCP and after this study a series of correlation analyses at several sites will show clearly the difference two methods. And also a quality control of long-term wind data is very important in estimation of wind speed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.375-378
• /
• 2016

The difficulty of "information sharing", "information reusing" issues happening in Wireless Sensor Network is due to the heterogeneity of the application environment, data processing, communication protocol etc. Based on the introduction of the Ontology theory, though analyzing the sensor characteristic a general type of sensor ontology contains the definition of concept, frame structure and OWL design was proposed from the standpoint of sensor observation. The paper expounded a system framework of the domain ontology through the expansion of knowledge base on the general sensor could achieve the information sharing and reuse by semantic communication between the general sensor ontology and user. The research of this method would bring new idea to the semantic sensor network construction.

• Journal of the Korean housing association
• /
• v.21 no.1
• /
• pp.67-77
• /
• 2010

Citizen participation in local redevelopment has recently been regarded as essential, since progress in democracy and diversified public interests have contributed to more importance being placed on citizen participation in the implementation of public policies. While the importance of resident participation has been increasingly emphasized in principle, in reality more effort is still required in its application. We need to develop practical strategies of collecting community opinion in order to reflect it in public policy, if we are to achieve a resident and citizen-centered society. The purpose of this study is to develop an image map construction tool that can be applied to the "Maul-Mandulgi" projects as a visualized method to facilitate the exchange of opinions and work toward agreements. The tool is intended to assist public discussion by visualizing policies and plans and reducing the possibility of misunderstanding, so that residents can properly respond to the plans. Second, this study will verify the effectiveness of the tool in the application to local community workshops. The main research method is participant observation method and field study. Major findings are as follows, First, every resident who had participated in previous workshops gathered together, used the tool and represented their opinions unusually more than once. Each resident tried to make sure that other participants appropriately understood his or her opinion. The workshop finished when all participants agreed and produced a consensus. The workshop took much less time, which is in stark contrast to previous workshops in which it took significantly more time to collect opinions. Second, it proved that residents in the redevelopment area can strike a broad agreement by themselves on a method and direction for residential improvement. In previous workshops, conflicts between residents developed over the choice between the two methods, of local improvement and total demolition prior to multi-housing construction. In this study, opinions of residents were not limited to the two methods by finding a winwin solution. Third, the use of the tool kit for image map became efficient for inactive residents to develop their own opinions in regard to the direction and orientations of the residential improvement process. In addition, for those who have either no or a slight understanding of the residential improvement projects, the tool can provide access to information and knowledge. This study concludes that the developed tool for imaging of the redevelopment projection like a design game, rather than using forms of text and speech, can be a useful tool in collecting opinions and forming an agreed opinion for forthcoming residential improvement plans.

• Journal of the Korean housing association
• /
• v.13 no.6
• /
• pp.133-140
• /
• 2002

This study researches the dwelling satisfaction about apartment remodeling by inspecting ten apartments located in Gwang-Ju, Jun-Nam province. The method of study is to use the field study method, which is based on cultural anthropology, and the participant observation method at same time. According to the research, we find those things as they follow. First, the participation of residents and the mutual agreement are necessary in the process of the selecting a company. Furthermore it's hard to solve the problem about an uniform design and an inferior construction. These things are the most serious factor in dissatisfaction of resident environment. Second, the space of storage and veranda should be separated for the proper functions and the space for laundry is necessary. The rooms, except bedroom, and the bathroom in the main living room should be used for practical application because they are not used so often and if we make the veranda as a inner space, we've got to make a gardening plan, too. Through this research we find out that the participation of an expert company and residents for enough communication and mutual agreement and the space plan for the satisfaction of occupants are necessary for the proper apartment remodeling.

• Journal of Environmental Science International
• /
• v.15 no.9
• /
• pp.871-880
• /
• 2006

Water management treatment of coastal region has been an important problem in Jeju city since the distributions of pipeline of the pumping system made a bad view in coastal region. To solve the problem, we observed the pipelines that are on the surface around the coastal region from Tapdong to Doduhang. From the observations, we found that Todong and Dodu areas were not unsightliness because the all pipelines were located in underground. However, the other areas, such area Yongdam, Handugi, Yongdam fishing village, had a serious problem for the coastal landscape view. To solve the problem, at we estimated coastal land color characteristics of Jeju city based on the observation of the pipelines. The estimated color panel shows that the green, blue and grey colors are a dominant factors of the Jeju coastal region. Based on the color panel, we proposed two methods, that is, one is a short time treatment, the other is a long time one. The short is based on the colour treatment, which is pipeline colour changing into surround natural one. The long time is the construction plan design method. Although the later method was very useful in Jeju island. However, it takes a lot of time and money. Therefore, in the situation, the short time is the better than the long time one.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.6
• /
• pp.47-57
• /
• 2005

Stress distribution in soils is the very important element to design and to solve the problems of settlement, safety of foundations and trafficability of constructing vehicle in civil engineering. This research presents the comparative estimation of the actual and theoretical measurement on the underground stress of outer layer for each soil after the observation of each top soil layer fur its vertical and horizontal stresses in (1) homogeneous sand ground (2) weak stratum with the sand soil (3) weak stratum with gravel of the soil model, and it also investigates the effect of subsidence of ground by the repeated load. The underground stresses fumed out to be different in the value of theoretical and actual measurement after the trial examination of model. This study has the purpose of suggesting the better construction method of running equipment on weak stratum by comparing the estimated value of trial experiment and theory on underground stress of the weak ground surface area and of raising up the necessity of the continuous research hereafter.

• The Research Journal of the Costume Culture
• /
• v.18 no.2
• /
• pp.261-276
• /
• 2010

The analysis of an art trend in the principle dimension starts by observing the object of work in the perspective of formative composition and recognizing it as a universal system. It can be said that it is consistent with an interpretation method for a form theory of formal history by Heinrich W$\ddot{o}$lfflin, a leading form critic in art criticism. Hence, the purpose of this study was to find out what are the formative principles in Renaissance Classicism as a design principle to be applicable to modern fashion by reviewing the formative characteristics of Renaissance Classicism Architecture with which W$\ddot{o}$lfflin directly dealt. As for the theoretical literature review, I used W$\ddot{o}$lfflin's theoretical framework and looked at the Renaissance Classicism Architecture that he studied and examined the possibility of utilizing his theory as a layout principle and the characteristics. As for analysis of design cases, I applied the aforementioned architecture layout principle to modern fashion and conducted case study analysis to delve into distinctive layout principles found in fashion. The study showed that the Renaissance Classicism Architectural Style is marked by linearity, planarity, closing and multiple unity: linearity was expressed in the observation form in fixed frontal view and an emphasis on a tangible silhouette homeogenous and definite line structures; planarity was achieved in the form of paralleled layers of frontal view element, planarity style, and identical and proportional repetition of various sizes.; closing signified the pursuit of complete and clear regularity, and architecture developed in a constructive phase through organizational inevitability and absolute invariability.; multiple unity was expressed in self-completedness and independent parallel of discrete forms and harmony of emphasized individual elements in a totality. Applying these layout characteristics of the Renaissance Classicism Architectural style and to see their individual expressive features, I found out that in adopting layout principles of the Renaissance Classicism Architecture to modern fashion, it turned out to be an emphasis of individual silhouettes, a flattened space, completed objects, organic harmony among independent parts: the emphasis of individual silhouettes was expressed in individual definitiveness of formative lines of clothes in accordance with body joints and an emphasis on formative lines of clothes; the flattened space was marked by single layer structure, planarity of elements of clothes, and listing arrangement by appropriate proportion.; the completedness of the objects was expressed by the stationary state where overall image is fixed, the construction of homogeneous and complete space, and absolute inevitability of internal layout in proportion; lastly, organic harmony of independent parts was stressed in independent completedness of each detail, and organic harmony of the whole. The expressive features would lead to a unique expression style of linear emphasis, proportion, constructive forms, and two-dimensional arrangement. The meaning of this study is follows: The characteristics of art school of thought are given shape by appling & analysing the architectural layout principles of historical art school of thought to modern fashion in the view point of formal construction dimension. The applied possibility of historical art school of thought as the source of inspiration about the fashion design is extended.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.5
• /
• pp.607-614
• /
• 2011

This study deals with thegeometrical nonlinear dynamic behavior of laminated plates made of advanced composite materials (ACMs), which contain central cutouts. Based on the first-order shear deformation plate theory (FSDT), the Newmark method and Newton-Raphson iteration wereused for the nonlinear dynamic solution. The effects of the cutout sizes and lay-up sequences on the nonlinear dynamic response for various parameters werestudied using a nonlinear dynamic finite element program that was developed for this study. The several numerical results agreed well with those reported by other investigators for square composite plates with or without central cutouts, and the new results reported in this paper showed significant interactions between the cutout and the layup sequence in the laminate. Key observation points are discussed and a brief design guide for laminates with central cutouts is given.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.525-531
• /
• 2015

According to the increasing demand for 3D indoor spatial information, the utilization of a terrestrial laser scanner comes to the fore. However, the research for the comparison between a terrestrial laser scanning method and a traditional surveying method is insufficient. The paper evaluated the time-efficiency and the locational accuracy of an AMCW type and a direct TOF type of terrestrial laser scanning methods in comparison with the observation using a total station. As a result, an AMCW type showed higher time-efficiency than a direct TOF type and the RMSE between the two types of data was ${\pm}1mm$. Moreover, the terrestrial laser scanning method showed twice higher time-efficiency than the observation using a total station and the RMSE between the two data was ${\pm}3.4cm$. The results indicate that the terrestrial laser scanning method has better profitability and performance for 3D indoor modeling than the traditional survey using a total station. In the future, a terrestrial laser scanner can be efficiently utilized in the construction of 3D indoor spatial information.