• Journal of the Korean Wood Science and Technology
• /
• 제24권3호
• /
• pp.101-109
• /
• 1996

Effects of process variables were evaluated in physical properties of the wood fiber-thermoplastic fiber composites using nonwoven web method. Turbulent air mixer using compressed air was employed to mix wood fiber with two types of thermoplastic polypropylene and nylon 6 fibers. The optimal hot press temperature and time were found to be $190^{\circ}C$ and 9 minutes in wood fiber-polypropylene fiber composite and to be $220^{\circ}C$ and 9 minutes in wood fiber-nylon 6 fiber composite. As the density of wood fiber-polypropylene fiber composite and wood fiber-nylon 6 fiber composite increased, the physical properties were improved The density appeared to be the most significant factor on physical properties in the statistical analysis. The composition ratio of polypropylene or nylon 6 fiber to wood fiber was considered not to be statistically significant factor. The thickness swelling decreased somewhat in wood fiber-polypropylene fiber composite and wood fiber-nylon 6 fiber composite as the content of synthetic fiber increased. As the increase of mat moisture content, dimensional stability was improved in wood fiber-polypropylene fiber composite but not in wood fiber-nylon 6 fiber composite.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.536-539
• /
• 1999

Physical properties of glass fiber-reinforced nylon 6,6 and ionomer blends were investigated in variation of ionomer and glass fiber content. With the increase of ionomer content, tensile strength, impact strength and flexural strength decreased, whereas increasing glass fiber content, these properties were improves. Both permittivity and tan $\delta$ remain unchanged. Space charge distribution was investigated by PEA (Pulsed electroacoustic) method. Heterocharge was found in nylon 6,6 and 히ass fiber composites, whereas composites, whereas when ionomer is blended.

• 폴리머
• /
• 제24권5호
• /
• pp.673-681
• /
• 2000

플라즈마 처리가 나일론 6 직물의 표면 특성과 폴리아닐린/나일론 6 복합직물의 전도도에 미치는 영향을 연구하였다. 산소 플라즈마로 처리한 나일론 6 직물의 표면을 XPS 분석을 통해 확인한 결과 C-O, C-OH 등의 관능기가 도입되었으며, 이는 직물과 폴리아닐린의 결합력을 향상시켜 전기 전도도와 폴리아닐린 부착량을 증가시켰다. 또한 산소 플라즈마로 처리된 폴리아닐린/나일론 6 복합직물은 세탁과 마모에서도 우수한 안정성을 나타내었다. 초음파 처리는 매질에 발생된 cavitation과 진동에 의해 직물 내부로 아닐린을 확산시키는데 효과적이었으며, 이는 폴리아닐린/나일론 6 복합직물의 전기 전도도를 크게 향상시켰다. 아닐린의 농도와 중합욕에 침지 휫수가 증가함에 따라 전기 전도도와 복합직물의 형태안정성에 대한 영향을 살펴보았는데, 단량체 농도는 0.5M 까지는 증가함에 따라 전도도가 향상되었으며, 침지 횟수가 증가함에 따라서도 전도도가 향상되었다.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.18-26
• /
• 2003

Nylon 6.6 was treated with anionic synthetic tanning agent at different pH values, temperatures and liquor ratios to determine exhaustion properties. Treatments using syntan were conducted to the undyed nylon 6.6 fiber and three acid dyeings and then samples of the bath solution were subjected to HPLC analysis. Mass analysis was considered to determine the syntan components. In addition, the effect of applications using syntan and syntan/cation in improving the stain resistance was observed. The optimum treatment condition of syntan was achieved and the major component of syntan, being exhausted to the nylon substrates, was determined. In terms of stain blocking effect, a significant improvement was achieved by the syntan and syntan/cation treatments.

• 공업화학
• /
• 제9권7호
• /
• pp.979-984
• /
• 1998

Nylon6,6를 matrix로 사용하여 전도성 고분자인 polyaniline(PANI)과의 전도성 복합체를 블렌딩 방법에 의하여 제조하였다. 블렌딩은 m-cresol를 용매로 사용하였으며 PANI는 camphorsulfonic acid(CSA) 혹은 dodecylbenzenesulfonic acid (DBSA)와 같은 알킬 벤젠 술폰산으로 양성화시켰다. 또한, 비상용성인 두 고분자간의 혼화성을 개선시키기 위하여 가소제를 첨가하여 상분리를 최대한 억제시켰다. 제조된 전도성 복합체에 대하여 양성화제의 유무에 따라 또는 PANI의 함량에 따라 전기전도도 및 몰포로지 등을 측정 분석하였다. PANI 착체의 함량이 증가할수록 전기전도도는 증가하였고, 알킬 사슬의 길이가 긴 DBSA로 양성화된 PANI(25wt%)과 가소화된 nylon6,6의 전도성 복합체의 전기전도도는 1.02 S/cm까지 향상되었다.

• 공업화학
• /
• 제10권2호
• /
• pp.281-286
• /
• 1999

Nylon6,6를 matrix로 사용하여 전도성 고분자인 polypyrrole (PPy)과의 전도성 복합체를 블렌딩 방법에 의하여 제조하였다. PPy를 화학적으로 중합시키는데 있어서 $FeCl_3$를 산화제로 사용하였으며, dopant로서 camphorsulfonic acid (CSA)와 dodecylbenzenesulfonic acid (DBSA)와 같은 알킬 벤젠 술폰산을 사용하였다. 제조된 전도성 복합체에 대하여 dopant의 종류에 따라 또는 PPy의 함량에 따라 전기전도도 및 몰포로지 그리고 기계적 물성 등을 측정 분석하였다. PPy 착체의 함량이 증가할수록 전기전도도는 증가하였으며, 알킬사슬의 길이가 긴 DBSA로 도핑된 25 wt % PPy 착체와 nylon6,6 복합체의 전기전도도는 0.64 S/cm까지 향상되었다.

• 한국염색가공학회지
• /
• 제14권5호
• /
• pp.284-293
• /
• 2002

Nylon 6 and polyester taffeta fabrics are dyed in aqueous medium with vat dyes such as Indanthren Red FBB, Mikethren Blue ACE and Mikethren Blue HR varying the compositions of sodium hydrosulfite and NaOH. Also nylon UMF nonwoven and polyester UMF knitted fabrics are dyed with metal complex and disperse dyes as a reference, and the wash and rubbing fastnesses for these dyes are investigated. In vat dyeing of polyester and nylon taffeta, an optimum composition of sodium hydrosulfite/NaOH is existed at a range of 1∼2wt%/0.2wt%. A good build-up property for Mikethren Blue ACE on nylon 6 UMF nonwoven fabric is shown at high temperature. Vat dyeing of polyester with Mikethren Blue Ace shows a good color shade in a higher temperature, while dyeing with Mitsui Blue HR shows low temperatures. Vat dyes In dyeing of both nylon 6 UMF nonwoven and polyester UMF knitted fabrics have a better wash fastnesses compared with metal complex or disperse dyes.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.14-14
• /
• 2012

Nylon 6 섬유는 우수한 기계적 물성과(강성, 탄성회복률 등) 염색성 등의 장점을 가지고 있어 의류용 등의 다양한 용도로 활용되어 왔다. Nylon 6 섬유를 포함한 대부분의 합성섬유는 천연섬유인 cotton 대비 흡수성이 낮고, cotton은 흡수성은 탁월하나 수분 건조속도가 매우 느리고 가격이 고가(약 10$/kg)여서 이를 대체할 새로운 고쾌적성 의류용 nylon 합성섬유의 개발이 시도되고 있다. 1953년 최초로 합성이 보고된 nylon 4는 구조상 소수성 탄소수가 적으며 친수성 아마이드기가 상대적으로 많아 흡수성과 속건성이 탁월한 이점을 가짐으로써 면을 대체할 수 있는 꿈의 합성섬유로 인식되었다. 1980년대 Chevron Research사를 중심으로 활발한 사업화 연구가 진행되었지만, 녹는점 $265^{\circ}C$) 대비 낮은 열분해온도($260^{\circ}C$) 특성으로 방사가공 시 내열성 문제를 극복하지 못해 아직까지 상업화에 이르지는 못하고 있다. 최근, 일본 산업기술종합연구소(AIST)를 중심으로 다시 바이오매스 유래 nylon 4의 개발이 시도됨에 따라 의류용 용도전개에 있어 가격 경쟁력을 갖춘 획기적인 소재 전환이 기대되고 있으며, 이로 인해 nylon 4 중합 연구가 다시 전 세계적 주목을 받기 시작하였다. 국내에서도 최근 nylon 4의 방사 내열성을 극복하고 기능성 부여가 가능한 nylon 4 공중합물에 대한 대체 연구가 본격적으로 진행 중에 있다. 본 연구에서는 현재 국내에서 진행 중인 nylon 4 공중합 섬유의 연구동향과 함께 nylon 6 대비 물성 및 염색특성 차이를 비교함으로써 향후 산업화에 기초 자료로 활용하고자 한다.

• 패션비즈니스
• /
• 제20권3호
• /
• pp.119-132
• /
• 2016

Weighting of silk fabrics have long been practiced in silk fabric trading based on the primary consideration of price-weight, and secondary one of quality improvement in handle, luster, and drape properties. Recent trend of practicing weighting of silk fabrics is, however, focused on the improvement of the handle, luster, drape, and other properties. During the finishing processes of synthetic fiber, nylon, comprising amide structure, include the use of tannic acid, especially in the dyeing. A multitude of studies are being implemented in terms of improving fastness to washing, fastness to light of dyed nylon product, or the light fastness of nylon 6 itself. In this study, the effects of various tannic acid treatments on the physical properties related to the handle of nylon 6 and silk fabrics are examined and reviewed. The effects of treatment condition of the tannic acid, e.g., the concentration of the aqueous tannic acid solution, treatment time, and temperature were investigated. As the concentration of the aqueous solution of tannic acid increased, the bending rigidity values of the silk and nylon 6 fabrics increased. The treated fabrics felt stiff to the touch. Within the mild conditions of bending employed in the bending measurement of KES, nylon 6 treated fabric specimen exhibited a trend of improvement of bending resiliency within the range of small bending deformation. The weight of treated fabrics have all increased. The air-permeability values decreased as the treatment concentration increased. However, the decrease tendency of air permeability values may be alleviated by adjusting the fabric count during the tentering or expanding processes, either by tension adjustment or heat treatment. Optimum conditions of the treatment for nylon 6 are 1.25% tannic acid concentration, bath temperature of $85^{\circ}C$, pH 3.1, and those for silk fabric treatment are 1.25% tannic acid concentration, bath temperature of $85^{\circ}C$, pH 3.1. The treatment conditions will lead to the improvement in the properties of fabrics for summer.

• 한국염색가공학회지
• /
• 제27권3호
• /
• pp.175-183
• /
• 2015

Weight loss treatment of a fiber leads an improvement of its handle and drape properties. Hydrolysis of a fiber is commonly known as a method to reduce its weight of 5-40%. Most of the studies on the weight loss treatment are mainly based on polyester fibers and there has been almost no study on the weight reduction of nylon fibers. In this study, however, in order to develop a use of nylon 6 fiber for the industrial applications such as toothbrush, underwear, carpet and more, weight loss treatment of a nylon 6 fiber was carried out. Under various treatment conditions, morphological analysis were done to observe the change in the structure of the surface and analysis. From the observation of formic acid treated nylon 6 fiber, there were many etched and deformed morphologies. Thermal and crystalline properties were analyzed to find the changes in the crystal structure caused by the weight loss treatment. There were little differences in the crystalline properties of nylon 6 fiber by formic acid treatment. Tensile strength of nylon 6 fiber decreases with acid concentration. The FITR peak intensity of the amide bond decreases with formic acid concentration.