• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.1
• /
• pp.27-32
• /
• 2002

In this study, estimate of Mechanical Properties depending on Injected direction in Polymer for Automobile Application. The used materials is polyamid(nylon6), polypropylene(PP) of a simple component and its mixed, reinforced glass fiber(15%) in polyamid. One side direction of a simple component is highest strength and the two sides direction of multicomponent appear lowest strength. This is caused by effects of weldline, imperfect fusion and impregnation of multicomponent. To improve mechanical properties, it is necessary to minimize of weldline, compatibility, perfect fusion and impregnation in multicomponent polymer.

• Journal of the Korean Applied Science and Technology
• /
• v.5 no.1
• /
• pp.63-70
• /
• 1988

The quaternized compound of the copolymer between 2-diethylaminoethyl methacrylate and stearyl methacrylate (DSACC) was chosen as the mother resin for the water repellent of acrylics. The quaternized compound of 1-lauroyl dis (amino ethyl)-2-dodecyl imidazoline (LDDIC) was used to promote softening effect and hydrostatic pressure for the water repellent. The water repellent (EDUWC) obtained from the DSACC and LDDIC blended with waxes and emulsifiers improved the properties such as the water repellency, washable, tear strength and crease recovery when it was treated on the nylon fabrics with and without the resin. The reaction mechanism between the Nylon fiber and EDLWC was examined, and EDLWC was confirmed as the durable water repellent.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.23-29
• /
• 1998

본 논문은 foraming층이 음파의 전달 특성에 미치는 영향 및 멘드릴형 광섬유 하이 드로폰의 광음향 감도 특성에 미치는 영향을 분석한 것이다. 유한 요소법을 이용하여 foaming층의 내부 구조에 따른 음파의 전달 특성을 분석하였고, AL(Aluminium)/foaming 및 Nylon/foaming 멘드릴(mandrel) 각각에 대하여 foaming층의 재질 및 두께 변화에 따른 광음향감도 변화를 분석하였다. 그 결과, foaming층 내의 구조변화의 영향을 무시할 수 있 었다. 또한 AL al cNylon층상 복합체인 멘드릴에서 foaming층의 탄성율이 낮을수록, 두께 가 증가할수록 공음향 감도는 증가하였다. 그러므로 1GPa 이하의 탄성율을 지닌 두꺼운 Foaming층을 사용하여 층상 복합체 멘드릴을 구성하는 것이 광음향 감도의 향상을 위하여 효율적이다.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.1
• /
• pp.87-92
• /
• 1995

To prepare a O/W type durable softner(OESA), octadecamidoethylaminoethyl dodecate and tetra (2-dodecamidoethyl) urea synthesized as the main components of softner, were blended with polyoxyethylene(20) oleyl ether, sorbitan sesquioleate, and polyoxyethylene(7) stearyl ether in various compositions. Emulsion stability of OESA was good, and mixed HLB value was 9.7, OESA was found was to be good durable softner for nylon through the examination of softness, lubriation, antistatic property, bending resistance, and color fastness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.997-1007
• /
• 2005

The textile finishing methods utilizing chitosan have been mostly focused on the applications in the improvement of the dyeing of cotton fabrics, or the improvement of hand of the cotton or wool fabrics. On the other hand, it Is difficult to find the application examples in the synthetic fiber fabrics including polyester and nylon fabrics. The aim of this study is to improve the stiffness and the poor wash fastness of the fabrics treated only with chitosan. We tried to improve the softness by employing chitosan and polyurethane mixture solution and to prevent the detachment of the chitosan from the fabric. The treatment was applied to cotton, polyester, and nylon fabrics. The change of the properties of the treated fabrics were investigated. The optimum finishing condition was sought by changing the mixture ratio of the chitosan/PU(polyurethane) solutions. The adjusted ratios of the chitosan/PU solutions were 1 : 0, 1 : 0.25, 1 : 0.5, and 1 : 2 during the mixture solution preparation. Using the KES(Kawabata Evaluation System), the physical and mechanical properties of the finished fabric specimens were analyzed, and hand values of the specimens were calculated through the use of translational formulas. According to the chemical composition of the fibers, chitosan solution or chitosan/PU mixture exhibited wide range of coating effect. Since the chitosan acid solution has high polarity, the bonding force with the cotton fibers is high. By the appropriate addition of PU in the chitosan treatment of cotton, KOSHI and HARI values of the fabric improved. The air permeability of the chitosan/PU treated cotton fabric specimen improved, resulting in the highest value at the mixture of chitosan : PU=1:0.25.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.2
• /
• pp.69-74
• /
• 1994

Durable softening water repellents for nylon fiber were synthesized, using two compounds: quaternized octadecyl methacrylate-2-diethylaminoethyl methacrylate copolymer as a mother resin of water repellent and quaternized fatty carbamide for improving softness and hydrostatic pressure, of which syntheses were studied in the previous papers. They were blended with waxes and emulsifiers in a variety of ratios and synthesized into water repellent PADWC, and it was nylon taffeta treated with and without textile finishing resin. The synthesized water repellents can be used either or without resin. The optimum curing temperature was 150 to 160$^{\circ}C$ and the optimum concentration was 3 to 5wt%. In the independent and conjunct treatment, the water repellency of nylon taffeta samples have no remarkable changes between initial value and that after three times washing, so these prove that the synthesized compounds are durable water repellent. The water repellency of PADWC-3 and -4 were around 90. Also, comparison of crease recovery and tear strength after repelling treatment showed that the synthesized water repellents have a very high softening effect.

• Textile Coloration and Finishing
• /
• v.32 no.4
• /
• pp.217-225
• /
• 2020

In this study, the dyeing characteristics of nylon fabric which is dyed with supercritical fluid were investigated. There were two dyes used in the dyeing experiment: C.I. Disperse Red 167 and C.I. Disperse Violet 93. Dyeing temperature, pressure, and leveling time were fixed at 110℃, 250bar, 60minutes, and the experiment was conducted with dyeing concentration of 0.1, 0.3, 0.5, and 0.85% o.w.f. The analysis of the experimental results was found out through the measurement of washing fastness and color coordinate. In addition, the calibration curve of each dye was drawn up and the amount of remaining dye was checked by measuring the absorbance of the residual dye. As a result of color difference measurement, as the concentration increased, the L⁎ value decreased and the K/S value increased. However, the increase in K/S value compared to the amount of input decreased as the concentration increased. The comparative experiment on the amount of residual dye(C.I. Disperse Red 167) in the pot showed that 99.14% of the amount was dyed at the concentration of 0.1% o.w.f, while it rapidly decreased to 77% at 0.85% o.w.f. C.I. Disperse Violet 93 dye also decreased from 0.5% o.w.f to 93.91%. In the washing fastness experiment of both dyes, the level of washing fastness began to decrease from samples dyed at 0.5% o.w.f. It may be because the simply absorbed dye was produced instead of completely being fixed in the amorphous region of the nylon fiber.

• Fashion & Textile Research Journal
• /
• v.15 no.1
• /
• pp.138-146
• /
• 2013

Chemical compositions and biological functions of brown colorants extracted from pine bark(Pinus densiflora) have been studied. Dyeing test using multifiber fabrics with extracted colorants were preliminary carried out. Dyeing conditions and fastness tests of selected fabrics have been also studied. The brown colorants were produced 1.5% concentrations by solvent extraction from milled pine bark using methanol. The colorants were extracted with 80% methanol as best choice by a criteria of solid quantity and dyeability on fabrics. The chemical compositions were identified as mixtures of taxifolin epicatechin and procyanidin by LC/MS analysis. The brown colorants could be dyed not only natural fibers such as cotton, silk and wool but also synthetic fiber as nylon and semi-synthetic fiber as viscose rayon. Maximum K/S values was shown at 400 nm according to different fiber with color appearance of redish brown. Optimum pH and temperature of dyeing conditions was 4 and above $80^{\circ}C$, respectively. The brown colorants had a strong antioxidant activity compared to Butylated hydroxyanisole as standard and weak antimicrobial activity against E. coli. compared to kanamycin. Washing, rubbing, perspiration, dry cleaning and light fastness for cotton, nylon and silk dyed with the brown colorants were carried out by KS K method. Most of color fastness such as washing, rubbing, perspiration, and dry cleaning were represented as 4-5 grade. However, light fastness was reported as 2-3 grade. From this studies, brown colorants produced pine bark have a high potentials for natural dyeing on fabrics with antioxidant activity.

• Textile Coloration and Finishing
• /
• v.8 no.2
• /
• pp.56-63
• /
• 1996

Low-temperature plasma treatment or sputter etching is of interest as one of the techniques to modify polymer surface. In this study, poly(ethylene terephthalate)(PET), nylon 6 and cotton fabrics dyed three black dyes were subjected to low-temperature argon plasma and also sputter etching. In relation to bathochromic effect, the surface characteristics of the treated fabrics and films were investigated by means of critical surface tension, SEM and ESCA measurement. The depth of shade of fabrics more increased by the sputter etching technique than argon plasma treatment. Many microcraters on the fiber surface formed by the sputter etching resulted in increase of surface area of the fiber and wettability, but the hydrophobic group was increased by the results of ESCA analysis. In particular the change in reflective index of the fibers was much more effective than the chemical composition of the fiber surface on increasing of the depth of shade.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.233-234
• /
• 2003

There are many advantages of dyebath-reuse, including less water to heat, less effluent to treat, and a reduced consumption of energy, dyes, and chemical auxiliaries. Because of the potential economic and environmental advantages involved in this process, clearly it is deserving of further investigation. Dyebath-reuse using pH-sliding system has been investigated in the dyeing of polyamide with a single acid dye in a previous study. (omitted)