• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.3
• /
• pp.35-44
• /
• 1985

This research explored the effects of abrasion, laundering, and abrasion/laundering interaction upon wear of 15 durable nonwoven fabrics. Wear was measured in terms of changes in tensile strength and stiffness. The test materials consisted of nine different dry-laid commercial interfacing fabrics of various fiber contents and six spunbonded poyester and polypropylene fabrics. Three fixed levels of abrasion and four fixed levels of laundering made up the 3$\times$4 factorial analysis used for the experiment and the analysis of variance. Findings revealed that abrasion had a greater effect than laundering on strength and stiffness of the tested fabrics. Laundering seemed related to the particular fibers used and to the fixation quality of fiber bonds. Spunbonded webs performed better than dry-laid webs in retaining tensile strength Stiffness change occurred more readily than strength change. Lighter, flexible, stretchable fabrics seemed less easily abraded than heavier, stiff, less stretchable fabrics. The interfacing fabrics of 70/20/$10\%$ nylon/polyester/rayon blends with high crosswise stretchability effectively resisted wear caused by abrasion and laundering. Further research is recommended to study the effects of longer abrasion periods and additional laundering cycles o,1 wear qualities of nonwoven fabrics. Additional factors such as amount and fixation methods of bonding agents, the effect of shear distortion, seam construction, and drycleaning solvents could also be studied.

• Textile Coloration and Finishing
• /
• v.26 no.2
• /
• pp.131-142
• /
• 2014

This paper was focused on investigating synthetic fabrics treated with persimmon juice by padding mangle repeatedly. The merit of dyeing by pad-dry method was easier color reproduction than dyeing by immersion method. With increasing number of padding, the dyed nylon fabrics showed deeper yellow-red colors, but dyed polyester fabrics had no uniform tendency. The dyed synthetic fabrics had a 3rd grade of ligtht, 4~5th grade of perspiration fastness, 5th grade of stain washing fastness, and 3~5th grade of rubbing fastness. As the number of padding and exposed time to sunlight or UV light increase, the value of K/S and ${\Delta}E$ increased and the colors become much deeper gradually. The color development had completed about 70 hours exposure to UV light. As the padding time of dyeing with persimmon juice increased, stiffness and water repellent property were enhanced, respectively. Also, the dyed synthetic fabrics had good antibacterial activity and deodorization.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.209-219
• /
• 1997

The research of the dentin bonding system was mainly on the chemistry and bonding strength. And in vitro assessement of biocompatibility of dentin bonding system was not completely developed. The purpose of this study was to evaluate the cytotoxic effect of several dentin primers. Scotchbond Multi-Purpose (3M Dental Products. USA). Gluma (BayerDental. Germany). All-Bond (Bisco. USA). ProBond (CaulkDensply, USA) and VeridonFil (Dongyang Nylon. Korea) were included. Cytotoxicity was tested using MTT cell viability test. 0.5 ul. 1 ul. 2 ul and 10 ul of each primer were added to the 96 well plate of incubated L929 cell lines. After 30-minute. 1. 4. 24 and 72-hour exposures. absorbance of L929 cells was observed with ELISA reader. All data were analyzed using t-test. All primers showed cytotoxicity on L929 cells under every conditions used in this study. Absorbance of L929 cells was decreased by time. Scotch bond group exhibited the lowest absorbance value in all exposure time and value.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.4
• /
• pp.165-170
• /
• 2008

The demand for the lighter parts compels new composite materials composed of nylon66 and glass fiber to be used for the clutch control hydraulic system to achieve the low cost, light weight and the simple production process. In this paper the feasibility of using those composite materials for the clutch system has been investigated. And the efforts have been concentrated to enhance the durability and the credibility of the system. The procedure has been developed to design the clutch system to satisfy the categories mentioned above and to analyze the durability of the system and to setup a simulation program for the realistic driving situations.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.437-440
• /
• 2004

To investigate the effects of pre-treatment and packaging materials for dried persimmon during 6 month storage, the citric acid, salt, xylitol, L-cystein was pre-treated on dried persimmon, and then packed with LDPE film($0.06\;{\mu}m$) and N/LDPE($0.06\;{\mu}m$). The rate of moisture contents, browning, fungi and weight loss of dried persimmon pre-treated with citric acid, salt, xylitol, L-cystein were changed a little in N/LDPE, but were highly changed in LDPE. The commodity of dried persimmon packed with N/LDPE was also higher than that of LDPE.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.139.2-139
• /
• 2003

The packaging and irradiation effects on the volatile compounds of red pepper powder were investigated. The red pepper powder (Capsicum annuum) was prepackaged in vacuum (PE/Nylon film bag), and irradiated with the dose of 0, 3, 5 or 7 kGy at 0$^{\circ}C$. The odor of irradiated red pepper powder was classified into 4 groups (0, 3, 5, and 7 kGy) by electronic nose using metal oxide sensors, and the volatile compounds developed by irradiation were analyzed by GC-MS along with solid phase microextraction. Hexanoic acid and tetramethyl pyrazine, which were found in red pepper powder of 0 kGy, disappeared in irradiated red pepper powder. Further, 1,3-bis(1,1-dimethylethyl)-benzene was detected by GC-MS as a new developed volatile compound in irradiated red pepper, and this compound was identified to be originated from packaging material not from red pepper powder. This study showed that off-odor from packaging materials was responsible for the volatiles produced from dried food treated with irradiation.

• Archives of Pharmacal Research
• /
• v.26 no.10
• /
• pp.880-885
• /
• 2003

Research in this paper focuses on the kinetic evaluation of swelling of the liquid crystalline phases of glyceryl monooleate (GMO). Swelling of the lamellar and cubic liquid crystalline phases of GMO was studied using two in vitro methods, a total immersion method and a Franz cell method. The swelling of the lamellar phase and GMO having 0 %w/w initial water content was temperature dependent. The swelling ratio was greater at $20^{\circ}^C than 37^{\circ}^C$ . The water uptake increased dramatically with decreasing initial water content of the liquid crystalline phases. The swelling rates obtained using the Franz cell method with a moist nylon membrane to mimic buccal drug delivery situation were slower than the total immersion method. The swelling was studied by employing first-order and second-order swelling kinetics. The swelling of the liquid crystalline phases of GMO could be described by second-order swelling kinetics. The initial stage of the swelling (t < 4 h) followed the square root of time relationship, indicating that this model is also suitable for describing the water uptake by the liquid crystalline matrices. These results obtained from the current study demonstrate that the swelling strongly depends on temperature, the initial water content of the liquid crystalline phases and the methodology employed for measuring the swelling of GMO.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.9
• /
• pp.1664-1669
• /
• 2017

Gamma-aminobutyric acid is a precursor of nylon-4, which is a promising heat-resistant biopolymer. GABA can be produced from the decarboxylation of glutamate by glutamate decarboxylase. In this study, a synthetic scaffold complex strategy was employed involving the Neurospora crassa glutamate decarboxylase (GadB) and Escherichia coli GABA antiporter (GadC) to improve GABA production. To construct the complex, the SH3 domain was attached to the N. crassa GadB, and the SH3 ligand was attached to the N-terminus, middle, and C-terminus of E. coli GadC. In the C-terminus model, 5.8 g/l of GABA concentration was obtained from 10 g/l glutamate. When a competing pathway engineered strain was used, the final GABA concentration was further increased to 5.94 g/l, which corresponds to 97.5% of GABA yield. With the introduction of the scaffold complex, the GABA productivity increased by 2.9 folds during the initial culture period.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.11-21
• /
• 2013

PURPOSES: As pavement generally provides service shorter than an expected life cycle, maintenance cost increases gradually. In order to help extending the service life and reduce maintenance cost, a new multi-functional composite pavement system is being developed in Korea. METHODS: This study is a part to develop the multi-functional composite pavement and is to investigate the mechanical performances of fiber-reinforced lean concrete for pavement subbase. The inherent problem of fiber reinforced concrete is dispersion of fibers in concrete mix. This study additionally evaluated fiber dispersion characteristics with respect to different fiber types. RESULTS: From the test results, the compressive strengths of the concretes satisfied the required limit of 5MPa at 7days. The standard deviation of the measured number of fibers were lower in the order of nylon, steel fiber and polypropylene. CONCLUSIONS: Reject ash was shown to be satisfactory as a replacement material to Portland cement in lean concrete base. The fiber volume fraction is suggested to be 0.4% even though the fracture toughness did not vary significantly with respect to fiber types. However, fracture energy absorbed up to complete failure increased with the increased fiber volume fraction increment.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.818-824
• /
• 2019

In the present work, we determined the gamma-ray attenuation characteristics of eight different polymers(Polyamide (Nylon 6) (PA-6), polyacrylonitrile (PAN), polyvinylidenechloride (PVDC), polyaniline (PANI), polyethyleneterephthalate (PET), polyphenylenesulfide (PPS), polypyrrole (PPy) and polytetrafluoroethylene (PTFE)) using transmission geometry utilizing the high resolution HPGe detector and different radioactive sources in the energy range 81-1333 keV. The experimental linear attenuation coefficient values are compared with theoretical data (WinXCOM data). The linear attenuation coefficient of all polymers reduced quickly with the increase in energy, at the beginning, while decrease more slowly in the region from 267 keV to 835 keV. The effective atomic number of PVDC and PTFE are comparatively higher than the $Z_{eff}$ of the remaining polymers, while PA-6 possesses the lowest effective atomic number. The half value layer results showed that PTFE ($C_2F_4$, highest density) is more effective to attenuate the gamma photons. Also, the theoretical results of macroscopic effective removal cross section for fast neutrons ($\sum_{R}$) were computed to investigate the neutron attenuation characteristics. It is found that the $\sum_{R}$ values of the eight investigated polymers are close and ranged from $0.07058cm^{-1}$ for PVDC to $0.11510cm^{-1}$ for PA-6.