• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권2호
• /
• pp.146-153
• /
• 2000

The purpose of present study is comparing the effect of Teflon Membrane and Nylon Membrane on bone regeneration in rabbit tibia. The 6 defects of $8{\times}8{\times}5mm$ size were drilled with dental handpiece in rabbit tibia, which on left side as an order of Control group(no coverage), Group 1(Nylon $5{\mu}m$ size), Group 3(Nylon $10{\mu}m$ size), and on right side Control group, Group 2($5{\mu}m$ Teflon), Group 4($10{\mu}m$ Teflon). Animals were killed at 7, 10, 14, 42 days to make specimens and observed the difference of healing potentials with light microscopy. The results were as follows ; 1. New bone formation has taken place at 14 days in Guided Bone Regeneration (GBR) group comparing to the Control group of massive inflammatory status. 2. Larger pore membrane allows more favorable healing potentials. Bone formation started earlier in larger membrane pore groups than smaller groups, until 14 days. 3. Bone forming potentials of Teflon membrane group was higher than Nylon membrane groups, Control group has the lowest bone forming potentials. 4. New bone formation was almost ended in 42 days, and there was no difference of bone formation between Nylon and Teflon membrane group of different size. There was no difference of bone formation at final stage(42 days) between Nylon membrane and Teflon membrane of same pore size. So nylon membrane may be clinically usable in guided bone regeneration case with further studies.

• 한국염색가공학회지
• /
• 제14권4호
• /
• pp.197-207
• /
• 2002

The physical properties and dyeability of the nylon 6 fibers prepared by high speed spinning at take-up speed of 4,100~5,600m/min were investigated. The strain decreased as the take-up speed was raised from 4,100m/min to 4,400m/min, but further increase of take-up speed could not decrease the strain. The stresses of the fibers spinned at various take-up speed did not make any noticeable differences. Birefringences, densities and crystallinities of the fibers increased with the take-up speed and then reached to a nearly maximum value at 5,300m/min. In DSC diagrams, the $\gamma$ form of crystal became dominant at higher take-up speed. The dye uptakes of C. I. Acid Blue 113 on the fibers decreased a little with the increase of take-up speed.

• Elastomers and Composites
• /
• 제49권4호
• /
• pp.293-304
• /
• 2014

고무 공기 스프링(rubber air spring)은 자동차, 철도차량 등 수송기기의 서스펜션 장치로 사용되고 있다. 고무 공기 스프링은 고무 에어백의 압축과 팽창을 통한 탄성효과로 스프링의 역할을 한다. 고무 공기 스프링의 주요 구성요소 중 하나가 고무 슬리브(rubber sleeve)이다. 고무 슬리브는 주요 구성성분인 클로로프렌 고무와 나일론 6 코드 간의 접착이 매우 중요하다. 본 연구에서는 첨가제의 영향을 고려한 고무 슬리브의 최적 배합조성과 조건을 찾기 위해 다양한 물성시험을 하였다. 또한, 보강섬유의 최적 배향을 선정하기 위해 유한요소해석법을 이용한 수치해석을 수행하였다. 고무 공기 스프링을 제조하여 실제 차량에 장착하여 기초물성과 피로수명 및 기밀성을 시험하였다.

• 한국의류학회지
• /
• 제20권6호
• /
• pp.1138-1150
• /
• 1996

This study was carried out to investigate the effects of dyeing on the mechanical properties, primary hand, total hand value (THV), and total appearance value (TAV) of woven fabrics. Cotton, PET, nylon, cotton/PET, and cotton/nylon woven fabrics were used as test specimens. Each of fabric was dyed under the same conditions as the fabrics for sportswear which consumers have selected as best. Mechanical properties of specimens were measured by KES-FB system and primary hand and THV were calculated by equation KN -201-MDY and KN-301-WINTER respectively. TAV was calculated by KN (eq. 10). The results were as follows: 1. In mechanical properties. tensile energy increased when cotton and two cotton mixture fabrics were dyed and decreased when polyester and nylon fabrics were dyed. Bending rigidity and shear rigidity decreased after all fabrics were dyed except nylon and cotton/ nylon mixture fabrics showing higher rigidities. Cotton fabrics showed higher surface roughness while other fabrics did lower values after dyeing. 2. In evaluation of primary hand and total hand , four primary hands of cotton fabrics so decreased after dyeing that THV were lowered. Numeri, Fukurami, and Sofutosa in primary hand of polyester, cotton/polyester, and cotton/nylon fabrics and Koshi and Numeri of nylon fabrics increased after dyeing and therefore THV of four fabrics were improved. 3. Cotton and polyester fabrics showed higher TAV due to their lower bending and shear rigidity, while nylon and cotton/nylon fabrics did lower values due to their higher shear rigidity. 4. It was proposed that the method of dyeing or treatment for minimizing the decrease of THV of cotton fabrics and TAV of nylon fabrics should be developed.

• 한국식품과학회지
• /
• 제21권2호
• /
• pp.252-257
• /
• 1989

OPP/PVDC 도포/LDPE 복합 필름과 Nylon/LDPE복합 필름을 사용하여 비엔나 소시지를 포장하며 품질수명을 비교한 결과는 다음과 같다. 두 복합 필름의 투습도와 가스투과도는 PVDC 도포 필름이 현저히 적었다. Nylon복합 필름은 가로, 세로 사이의 신장율이 비슷했으나 PVDC 도포 필름은 가로, 세로의 신장율이 4.5배 정도 차이가 있었다. 비엔나 소시지의 Critical Quality Index로서 VBN 이 더 적합했고 이 VBN 변화치로부터 구한 반응 속도상수로부터 $Q_{10}$치를 계산하여 예측한 품질수명은 $15^{\circ}C$ 저장의 경우 Nylon 복합 필름은 25일, PVDC 도포 필름은 31일, $5^{\circ}C$ 저장의 경우 Nylon복합 필름은 32일, PVDC도포 필름은 41일로 나타났다. PVDC도포 필름의 품질수명이 6일에서 9일정도 더 길었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권6호
• /
• pp.637-642
• /
• 1996

This experiment was conducted to determine RDP values of locally available feedstuffs that are commonly used in ruminant rations in Bangladesh. Four cattle were fistulated in the rumen for the in situ nylon bag studies. Seventeen different feedstuff sample (9 roughages and 8 concentrates) were evaluated in $4{\times}14cm$ nylon bags and incubated in the rumen for different periods of time (2, 6, 12, 24, 48 and 72 h). The variation in crude protein (CP) contents reflected on the average CP disappearance value throughout the rumen incubation. Soluble fraction (a), insoluble but degradable fraction (b) along with the rate of degradation also varied widely among the various feedstuffs. Under 2% of rumen outflow rate, the percentages of the calculated protein degradabilities of roughages were rice straw, 16.7; maize grass, 70.6; oat grass, 70.8; dhal grass, 71.1; sunhemp, 78.4; napier grass, 62.4; matikalai grass, 72.1; khesarikalai grass, 76.9 and daincha browse, 78.4, respectively. The results in the protein degradabilities (%) in 8% ruminal outflow rate of concentrates were wheat bran, 61.6; rice polish (red), 61.3; rice polish (auto), 30.9; mustard oil cake, 71.8; sesame oil cake, 74.2; coconut oil cake, 57.9; soybean meal, 49.2 and fish meal, 37.9, respectively.

• 한국포장학회지
• /
• 제4권1호
• /
• pp.11-16
• /
• 1997

Sorption studies involving the sorption of n-propanol by an Amorphous Nylon(Nylon 6I/6T) were carried out as a function of sorbate vapor activity at $23^{\circ}C$. Vapor activity levels from 0.035 to 0.91 were investigated to evaluate the concentration dependency of sorption mechanism. Sorption behavior of propanol by Nylon 6I/6T showed distinctive two mode sorption phenomena as a function of Vapor activity. At Vapor activity levels below a=0.11, equilibrium sorption was achieved within a short period of time(less than 20hrs), which can be interpreted as following a Fickian diffusion model. A Langmuir-Flory-Muggins Dual Mode Sorption model can also be applied at these concentration levels. However, for Vapor activities above a=0.11, the sorption process appeared to be non-Fickian and resulted in a lack of equilibrium being attained.

• 한국응용곤충학회지
• /
• 제43권4호
• /
• pp.275-279
• /
• 2004

망사시험관 및 유리시험관에서 톱다리개미허리노린재의 약충발육, 성충수명 및 산란수를 비교하였다. 약충기간은 유리시험관(20일)보다 망사시험관(약 21일)에서 약 1일 길었는데, 이러한 차이는 주로 5령충의 발육기간에 기인되었다. 우화율은 유리시험관($56\%$)보다 망사시험관($64\%$)에서 $8\%$높았다. 성충수명은 유리시험관보다 망사시험관에서 암컷이 약 4.1배, 수컷이 약 6배 길었다. 산란전기간은 유리시험관보다 망사시험관에서 약 1일 길었으며, 산란수는 유리시험관보다 망사시험관에서 약 3.5배 많았다. 산란지속기간은 망사 시험관에서 약 30일, 유리시험관에서 약 8일 이었다. 따라서 톱다리개미허리 노린재의 발육특성을 정확하게 구명하기 위해선 공기유통이 원활한 망사시험관을 사용하는 것이 적합할 것으로 판단되었다.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.311-321
• /
• 2014

In this study, Aftertreatment properties of PCM/Nylon sheath/core fabrics have been determined. Especially, the relationship between finishing property and content including of PCM ratio. Samples of PCM/Nylon fabrics were monitored, separately, with 2% o.w.f solutions of each of the berberine chloride, cetylpyridinium chloride(CPC), benzyldimethylhexadecyl ammonium chloride(BDHAC) and dodecyltrimetyl ammonium bromide(DTAB). Various temperatures and liquor ratio and pH conditions were also studied to optimize aftertreatment properties. Berberine chloride finished sample showed the good color fastness. Cetylpyridinium chloride(CPC) finished sample showed very effective antibacterial properties against Staphylococcus aureus and Klebsiella pneumoniae.

• 한국대기환경학회지
• /
• 제18권4호
• /
• pp.297-303
• /
• 2002

Fine particles (d$_{p}$ < 2.5 $\mu$m) were measured using an annular denuder system (ADS) in Chongju. The data set was collected on fifty-eight different days with a 24-hr sampling period from October 27, 1995 through August 25, 1996. Particulate nitrate in the ADS was also measured on teflon and nylon filters in series behind denuders to collect HNO$_3$, HNO$_2$, SO$_2$and NH$_3$. From this study. the mean concentration of particulate nitrate of PM$_{2.5}$ in the ADS were seen with the following order: winter (5.05) ＞fall (4.36) ＞spring (3.92) > summer (1.10 $\mu\textrm{g}$/㎥). Nitrate losses, which calculated from the ratio of nylon filter nitrate to the sum of teflon and nylon filter nitrates, varied in the following manner summer (72.2%) > spring (42.6%) > fall (23.5%)> winter (0.4%). Especially, gaseous nitric acid was dominant at temperature higher than 8$^{\circ}C$ while particulate nitrate was major species in total nitrate below that temperature. This indicates the particulate nitrate loss is strongly correlated rather with ambient temperature.e.e.