• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.628-635
• /
• 2014

The large amount of $CO_2$ emitted from mushrooms during incubation and developmental stages can be utilized in plant production systems as a $CO_2$ source. The objectives of this study were to measure the $CO_2$ emission and absorption rates of mushroom and lettuce, respectively, and to analyze the $CO_2$ concentrations at various ratios of mushroom and lettuce in a closed production system. The $CO_2$ emission rate of king oyster mushrooms (Pleurotus eryngii ( DC.) Qu$\acute{e}$l) and $CO_2$ absorption rate of lettuces (Lactuca sativa L. cv. Asia Heuk Romaine) were measured by using two closed acryl chambers ($1.0m{\times}0.8m{\times}0.5m$) in which indoor temperatures were maintained at $18^{\circ}C$ and $22^{\circ}C$, respectively. The lettuce was grown at a light intensity of PPF $340mol{\cdot}m^{-2}{\cdot}s^{-1}$ and with nutrient solution at EC $1.2dS{\cdot}m^{-1}$. The air was periodically circulated between the two chambers using a diaphragm pump. The $CO_2$ emission rate of the mushroom increased until the $15^{th}$ day after scratching (DAS) and then decreased. The rate also increased with increased indoor temperature. In particular, the $CO_2$ emission rate per fresh weight of fruit body increased by about 3.1 times after thinning compared to before thinning. In terms of $CO_2$ balance, the $CO_2$ emission rates from a bottle (950 mL) of the mushroom at 9, 12, and 14 DAS were equivalent to those of 3, 4.5, and 5.5 lettuce plants at 7, 10, and 12 DAT (days after transplanting), respectively. This work shows that balance in $CO_2$ concentration could be achieved using an appropriate ratio of the two crops in a closed production system.

• Journal of Bio-Environment Control
• /
• v.11 no.4
• /
• pp.151-156
• /
• 2002

Root zone cooling, such as soil or nutrient solution cooling, is less expensive than air cooling in the whole greenhouse and is effective in promoting root activity, improving water absorption rate, decreasing plant temperature, and reducing high temperature stress. The heat transfer of a soil cooling system in a plastic greenhouse was analyzed to estimate cooling loads. The thermal conductivity of soil, calculated by measured heat fluxes in the soil, showed the positive correlation with the soil water content. It ranged from 0.83 to 0.96 W.m$^{[-10]}$ .$^{\circ}C$$^{[-10]}$ at 19 to 36％ of soil water contents. As the indoor solar radiation increased, the temperature difference between soil surface and indoor air linearly increased. At 300 to 800 W.m$^{-2}$ of indoor solar radiations, the soil surface temperature rose from 3.5 to 7.$0^{\circ}C$ in bare ground and 1.0 to 2.5$^{\circ}C$ under the canopy. Cooling loads in the root zone soil were estimated with solar radiation, soil water content, and temperature difference between air and soil. At 300 to 600 W.m$^{-2}$ of indoor solar radiations and 20 to 40％ of soil water contents,46 to 59 W.m$^{-2}$ of soil cooling loads are required to maintain the temperature difference of 1$0^{\circ}C$ between indoor air and root zone soil.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.329-339
• /
• 1996

This study is to investigate the effect of mycorrhizal development, growth, nutrient absorption of P. thunbergii seedlings inoculated with Pisolithus tinctorius(Pt. KJ-1) in relation to toxic materials in soil. The concentrations on copper solution applied to the soils were 0, 40, 120, 260, 430ppm. The results are summarized as follows : 1. The germination of P. thunbergii with Pt. increased greater than without ectomycorrhizal fungi. Mycorrhizal development showed a significant decreasing trend at high concentration, and tolerant Cu test with Pt. in agar plate media showed a decreasing trend at a high level. 2. P. thunbergii seedlings inoculated with Pt. showed that the shoot length was significantly promoted at 40, 120ppm copper levels, and that of noninoculated seedlings had the lowest effect in 430ppm copper level. 3. The outer shape of ectomycorrhizal root tips after inoculating Pt. on P. thunbergii seedlings appeared as a monopodial type, a fern-like type, and a cluster-like type at 0ppm, 40ppm levels, but only monopodial type came out at 260ppm, 430ppm copper levels. 4. Root length, no. of juvenile leaves, total length of juvenile leaves, total dry weight, no. of needles and total length of needles of P. thunbergii with Pt. increased greater than those of noninoculated seedling. Growth response of P. thunbergii seedling inoculated with Pt. increased significantly at 40ppm, 120ppm Cu levels. 5. As a result of analysis of growth medium, pH, Na, CEC increased at higher Cu level, and total nitrogen, organic matters, available phosphorous, K, Ca and Mg decreased at 40ppm, 120ppm Cu levels. As a result of an analysis about a copper within soils, it appeared having high Cu-concentration at 0ppm level of an inoculated Pt. and high Cu-concentration in noninoculated Pt. than in inoculated Pt. at higher level. 6. As a result of an analysis of shoot, N, P, and K-concentration were higher in noninoculated seedlings than in inoculated seedlings, and Cu-concentration was higher in inoculated seedlings than in noninoculated seedlings. The analysis of root resulted in a high N-concentration at 40ppm, 120ppm levels, in a high P-concentration in inoculated seedlings and in a high Cu-concentration in noninoculated seedlings. Cu-concentration was significantly higher at root than at shoot.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.735-742
• /
• 2006

The objective of this study was to elucidate the tolerance of woody plants to simulated acid rain in relation to mycorrhizal inoculation. Germinating seedlings of Robinia pseudoacacia were planted in 1I pots with autoclaved soil mixture of vermiculite, sand and nursery soil at 1:1:1 ratio. Each pot was inoculated with both crushed root nodules from a wild tree of the same species and commercial arbuscular mycorrhizal inoculum of Glomus intraradices at the time of planting the seedlings. Simulated acid rains at pH 2.6, 3.6, 4.6, and 5.6 were made by mixing sulfuric acid and nitric acid at 3: 1 ratio. Each pot received nutrient solution without N and P, and was also supplied with 180 ml of the one pH level of the acid rains once a week for 50 days. The plants were grown in the green house. At the end of experimental period, plants were harvested to determine contents of chlorophyll, mineral nutrients and net photosynthesis in the tissues, dry weight of the plants, and mycorrhizal infection in the roots. Mycorrhizal infection rate was significantly reduced only at pH 2.6, which meant vitality of G intraradices was inhibited at extremely low pH. Height growth, dry weight production, nodule production and chlorophyll content were increased by mycorrhizal infection in all the pH levels except pH 3.6. Particularly, mycorrhizal inoculation increased root nodule production by 85% in pH 5.6 and 45% in 4.6 treatments. But the stimulatory effect of mycorrhizal inoculation on nodule production was reduced at pH 3.6 and 2.6. Net photosynthesis was increased by mycorrhizal infection in all the pH levels. The phosphorus(P) content in the tissues was increased by 43% in average by mycorrhizal inoculation, which was statistically significant except in pH 2.6. It was concluded that mycorrhizal inoculation of Robinia pseudoacacia would enhance growth and resistance of the plants to acid rain by improving the photosynthesis, phosphorus nutrition, and more nodule production.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.407-414
• /
• 2018

This study was aimed to evaluate the effect of application method and concentration of gibberellin $A_3$ ($GA_3$) on the growth, runner production, and seedling quality of strawberry plants (Fragaria ${\times}$ ananassa Duch. cv. Maehyang) during nursery period. The mother plants of strawberry were transplanted in pot ($64{\times}27{\times}18cm$) filled with commercial growing medium on March 20, 2018. $GA_3$ concentration was applied as 0, 50, 100 or $200mg{\cdot}L^{-1}$ with spray or drench to 45 mL per plant at 4 weeks after transplanting, respectively. Nutrient solution was supplied with the EC $1.5dS{\cdot}m^{-1}$ after the transplanting and supplied 350 mL per pot twice a day (15 min per one time) after rooting. The growth characteristics of mother plants of strawberry were measured at 7 weeks after treatment, and growth characteristics of daughter plants of strawberry were measured at 10 weeks after treatment. Runner length and diameter of mother plant was the longest or thickest in the spray with $200mg{\cdot}L^{-1}$ than the other treatments, respectively. Soil-plant analysis development (SPAD) value of mother plant was the lowest in spray with $200mg{\cdot}L^{-1}$. However, leaf length, leaf width, and crown diameter showed no significant differences in all treatment among application method and concentration of $GA_3$. As the concentration of $GA_3$ increased, physiological disorder like stretchiness of crown occurred more. The physiological disorder was the most occurred in spray treatment with $200mg{\cdot}L^{-1}$, but drench treatment occurred less than spray treatment. The number of runners and daughter plants increased with increasing concentration of $GA_3$ regardless of application methods. In the growth characteristics of the daughter plants, leaf length and leaf width of first daughter plant, plant height, crown diameter, leaf area and SPAD value of second daughter plant, and plant height of third daughter plant were the significantly greatest in drench with $100mg{\cdot}L^{-1}$ treatment. This results indicate that growth and runner production of mother plants and growth of daughter plants of strawberry were the best achieved by drench application in the $100mg{\cdot}L^{-1}$ $GA_3$.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.141-152
• /
• 2020

The rapid on-site measurement of hydroponic nutrients allows for the more efficient use of crop fertilizers. This paper reports on the development of an embedded on-site system consisting of multiple ion-selective electrodes (ISEs) for the real-time measurement of the concentrations of macronutrients in hydroponic solutions. The system included a combination of PVC ISEs for the detection of NO₃, K, and Ca ions, a cobalt-electrode for the detection of H₂PO₄, a double-junction reference electrode, a solution container, and a sampling system consisting of pumps and valves. An Arduino Due board was used to collect data and to control the volume of the sample. Prior to the measurement of each sample, a two-point normalization method was employed to adjust the sensitivity followed by an offset to minimize potential drift that might occur during continuous measurement. The predictive capabilities of the NO₃ and K ISEs based on PVC membranes were satisfactory, producing results that were in close agreement with the results of standard analyzers (R² = 0.99). Though the Ca ISE fabricated with Ca ionophore II underestimated the Ca concentration by an average of 55%, the strong linear relationship (R² > 0.84) makes it possible for the embedded system to be used in hydroponic NO₃, K, and Ca sensing. The cobalt-rod-based phosphate electrodes exhibited a relatively high error of 24.7±9.26% in the phosphate concentration range of 45 to 155 mg/L compared to standard methods due to inconsistent signal readings between replicates, illustrating the need for further research on the signal conditioning of cobalt electrodes to improve their predictive ability in hydroponic P sensing.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.106-113
• /
• 2005

This study was carried out to develop a novel hydroponic medium far fruit vegetable crops by using waste synthetic fibers. In physical analysis of the synthetic fiber medium (SFM), the bulk density and percent solid phase were lower, while the porosity and water content were greater in comparison with the rockwool slab. The SFM had pH of 6.5 and EC of $0.03dS{\cdot}m^{-1}$ both of which are similar to those of the rockwool slab. The CEC of 0.39me/100mL of the SFM was lower than compared with 3.29me/100mL of the rockwool slab. However, concentrations K, Ca, Mg and Na were slightly higher in the SFM than those in the rockwool slab. The 'Momotaro' tomato crop in the SFM gave comparable plant height, stem diameter, days to first flowering, fruit weight and percent marketable yield as the rockwool slab. In the SFM and in the rockwool slab, mean fiuit weight were 182g and 181g, percent marketable yield were $93.8\%$ and $92.0\%$, respectively. The marketable yield per 10a in the SFM was 12,799 kg, which was $97\%$ of that in the rockwool slab. Growth parameters such as leaf length and width, leaf number, stem diameter and chlorophyll content of an exportable cucumber crop grown in the SFM and the rockwool slab were not different. Fruit weight was greater in the rockwool slab, while percent marketable yield was greater in the SFM. The marketable fruit yield per 10a of 5,062kg in the SFM was $2\%$ greater than that in the rockwool slab. $NO_3$ concentration in nutrient solution during the crop cultivation was higher in the SFM than in the rockwool slab, while concentrations $NH_4$, K, Ca, Mg and $SO_4$ were not different between the two media.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.67-76
• /
• 2016

This study was conducted to examine the optimal environmental condition for promoting the growth of sowthistle as affected by light quality and photoperiod in a closed-type plant production system. Seeds were sown in 240-cell plug trays and then germinated for 3 days at a 24-hour photoperiod in a closed-type plant production system with LED lights (R:B:W = 8:1:1). Seedlings were transplanted and grown under 3 types of LED (R:B:W = 8:1:1, R:W = 3:7, or R:B = 8:2) and 4 photoperiods (24/0, 16/8, 8/16, or 4/20 hours) with $230{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light intensity at a density of $20cm{\times}20 cm$. The experimental design was a randomized complete block design. Plants were cultured for 40 days un der the condition of $21{\pm}2^{\circ}C$ and $70{\pm}10%$ relative humidity after transplanting. Plants were fed with a recycling nutrient solution (pH 7.0 and EC $2.0dS{\cdot}m^{-1}$) contained in a deep floating tank. Fresh weight and dry weight of shoot or root, leaf length, and leaf area were the greatest in the photoperiod of 24/0 (light/dark) with RW LED. The highest number of leaves occurred in the photoperiod of 16/8 (light/dark) with RB LED, while the incidence of tip burn was higher in the photoperiod of 24/0 (light/dark) compared to the other treatments. Chlorophyll value was the highest in the 16/8 (light/dark) photoperiod and there was no significant difference by light quality. Chlorophyll fluorescence was the lowest in the photoperiod of 24/0 (light/dark) compared with other treatments. Therefore, in terms of economic feasibility and productivity for Ixeris dentata Nakai cultivation in a closed-type plant production system, the results obtained suggest that plants grew the best when kept in a photoperiod of 16/8 (light/dark) and light quality of combined LED RW (3:7).

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.429-437
• /
• 2019

This study was conducted to examine the effect of humidification and shading during cutting propagation on growth and development of strawberry (Fragaria x ananassa Duch.) 'Maehyang' plants at a propagation stage. The runner cuttings were stuck on Nov. 23, 2017 in propagation benches set in a Venlo-type glasshouse. Four shading treatments, no shading (control, C), 55% shading with white lawn (W55), 55% black shading net (B55), or 100% black plastic film (B100) with either an intermittent fog system (H) or without fog system. The shading and fog systems were removed 2 weeks after sticking of strawberry cuttings. A nutrient solution for strawberry, which was developed by Yamazaki, was supplied once a day with electrical conductivity (EC) $1.6dS{\cdot}m^{-1}$ and pH 5.8. Growth parameters such as plant height, longest root, crown diameter, leaf chlorophyll, leaf area and fresh and dry weight were measured at 7 days and 26 days after sticking. There was no significant difference in growth of above-aerial part of strawberry. The overall growth of the strawberry roots was better grew by providing fog than that not provide fog. The root fresh weight and root dry weight after 26 days after sticking of strawberry cutting was the best in the treatment that provided fog system without shading (CH). The longest root after 26 days after sticking of strawberry cutting was the best in the treatments that provided fog system with either 55% white lawn (W55H) and 55% black shading net (B55H). These results suggest that morphogenesis of these plants were affected by humidification and shading types. In a broader perspective, these results can be used to optimize studies of other crops grown from cuttings.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.367-376
• /
• 2021

Strawberry cultivation in Korea is grown in greenhouse, but most farms manage their water supply using a timer control method based on the experience of growers. The timer control has problems in that it is difficult to consider the weather condition, the growth stage of crops, and the moisture content of the substrate, so that the crops cannot be managed at an optimal level, and the accuracy of cultivation management are lacking. The watering methods using integrated solar irradiance and substrate moisture contents are control systems that provide eco-friendly and precise water supply considering the growth conditions of crops. The purpose of this study was to compare the combined water supply control with integrated solar irradiance and substrate moisture contents and timer control method in hydroponic cultivation of strawberries using coir, and to set the optimal integrated solar irradiance level for complex water supply control. The irrigation system was automatically watered when it reached 100, 150, 250 J·cm^-2 based on the external solar irradiance, and forced irrigation was performed at a substrate moisture content of less than 60% in all treatments. The amount of irrigation at once was 50 mL. The timer treatment was applied as a control. The smaller the level of integrated radiation to start watering, the greater the daily amount of irrigation. Both the fresh weight and dry weight per plant were higher in the complex irrigation control method than the timer control, and the 100 and 150 J·cm^-2 treatment had the highest fresh weight, and the 100 J·cm^-2 treatment showed a significantly higher dry weight. The yield was also significantly higher in the complex control method than in the timer, and the early yield increased as the level of integrated solar irradiance was smaller. The fresh weight of fruit was the lowest in the timer-controlled irrigation. As a result of this study, the possibility of combined control irrigation method using integrated solar irradiance and substrate moisture content was confirmed for precise water supply management of strawberries in hydroponics.