• 한국안전학회지
• /
• 제19권1호
• /
• pp.12-17
• /
• 2004

By using an experimental approach recently developed to determine the torque-tension relationship for bearing frictional characteristics of several typical bolted joints were studied. The experimental approach allows the direct determination of the bearing friction between the nut and its bearing surface. Detailed friction studies were made on the influences of the size and shape of the hole, the use of a slot in a bolted joint, contact area and position, and other factors such as turning speed, coating, and the use of wax on the bearing surface. The contact area and position of the washer have a marginal effect on the bearing friction. The organic coating on the nuts reduces the bearing friction significantly. Nuts with organic coating over a washer with zinc finish provide the smallest and the most consistent bearing friction. The results from the experimental investigation will be helpful for the better design of bolted joints bearing friction. The results from the experimental investigation Will be helpful for the better design of bolted joints.

• 한국표면공학회지
• /
• 제36권6호
• /
• pp.491-499
• /
• 2003

Copper-based leadframe sheets were oxidized in a hot alkaline solution to form brown-oxide layer on the surface and molded with epoxy molding compound (EMC). The brown-oxide-coated leadframe/EMC joints were machined to form sandwiched double-cantilever beam (SDCB) specimens and sandwiched Brazil-nut (SBN) specimens for the purpose of measuring the fracture toughness of leadframe/EMC interfaces. The SDCB and the SBN specimens were designed to measure the fracture toughness of the leadframe/EMC interfaces under nearly mode-I loading and mixed-mode (mode I ＋ mode II) loading conditions, respectively. Fracture surfaces were analyzed by various equipment such as glancing-angle XRD, SEM, AES, EDS and AFM to elucidate failure path. Results showed that failure occurred irregularly in the SDCB specimens, and oxidation time of 2 minutes divided the types of irregular failures into two classes. The failure in the SBN specimens was quite different from that in the SDCB specimens. The failure path in the SBN specimens was not dependent on the phase angle as well as the distance from tips of pre-cracks.

• 자원리싸이클링
• /
• 제9권6호
• /
• pp.9-14
• /
• 2000

CSAC와 WPAC의 흡착특성을 보면 H공장 2차 처리수와 D공장 배출수에 함유된 ABS흡착에서 얻어진 Freundlich흡착등온식은 WPAC인 경우 q=23.12 $C^{ 0.42}$, q=18.32 $C^{0.38}$ 이고 CSAC인 경우 각각 $q=36.76C^{1.37}$ , q=26.67 $C^{0.42}$ 이었다. H공장 방류수의 파과점은 CSAC인 경우 680분이었고 WPAC는 610분이었다. 한편 D공장 배출수의 파과점은 CSAC인 경우 720분이었고 WPAC은 640분이었다. 이상의 결과로부터 CSAC 대체물로서 WPAC이 가능성이 있을 것으로 생각된다.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.135-141
• /
• 2019

Polyphenylene sulfide (PPS) was filled with glass fiber (GF), aramid fiber (AF), and solid lubricants to improve the mechanical properties and wear resistance. The addition of GF effectively enhanced the tensile strength, flexural modulus, and impact strength of PPS, while solid lubricants such as polytetrafluoroethylene (PTFE), molybdenum disulfide ($MoS_2$), and tungsten disulfide ($WS_2$) lowered the friction coefficients of the composites to below 0.3. The ball nut and motor pulley of the electric power steering (EPS) were manufactured using the PPS composites, and feasibility was ascertained thereafter by conducting the durability test. The composites filled with GF and AF showed high mechanical strength, but slip occurred at the interface between the pulley and belt while testing above $50^{\circ}C$. When small amounts of lubricants were added, the slip was no longer detected because of the suppression of friction heat. It is realized that the low friction as well as high mechanical properties is important to ensure the reliability of plastic pulleys.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.961-968
• /
• 2022

Hydrogen embrittlement leads to the damages in bolts, nut, especially, high pressure valves, in the semiconductor facilities, hydrogen vehicles, hydrogen stations and so on. Monel material has higher strength than SUS material. Therefore, even though Monel material with special alloy is usually used to prevent the hydrogen embrittlement, it needs powerful drawing system to manufacture the rectangular or hexagonal bar using circular bar. The purpose of this study is to investigate the characteristics of plastic deformation of Monel material and 2 rollers of rolling unit in plastic limit through numerical analysis. As the results, it was predicted that, based on mean stress, as the rolling step was increased, the rolling force of rolling unit was decreased. In addition, the heat treatment for Monel material was needed because of residual stress due to plastic deformation. As for rollers, the roller was safe about 1.86 times compared with that of ultimate strength. In this study, as the roller 2 showed larger stress than roller 1, thus, roller 2 should be designed carefully to guarantee the safety. Further it was confirmed that the reaction force of roller could be helpful in bearing design.

• 한국식품영양학회지
• /
• 제36권1호
• /
• pp.69-85
• /
• 2023

Sustainable and healthy diet is a challenge in recent world. Despite the global depletion of water resources, Korea has no system for controlling its water footprint. This study established the water footprint tables of Korean food using the Water Footprint Network databases, and applied them into two meal plans for 19~64 year-old adults recommended in the Dietary Reference Intakes for Koreans 2020. Nut, oil, and meat's water footprints were higher and those of fruit and vegetable were lower. Sesame oil had the highest water footprint of 21,793 L/kg and pineapple had the lowest domestic water footprint of 102 L/kg. Water footprint of one serving size of beef was 925 L, that of chicken was 260 L, and those of soybean were 43 L in global and 81 L in domestic. The water footprint of the recommended 2,400 kcal meal plan was 2,882 L, and that of 1,900 kcal meal plan was 1,915 L. The water resources can be saved by choosing food with lower water footprint. The results of this study can be used in the further researches for more sustainable and healthier Korean diet.

• 한국토양비료학회지
• /
• 제16권3호
• /
• pp.250-255
• /
• 1983

밤나무에 대(對)한 합리적(合理的)인 시비(施肥)를 목적(目的)으로 밤나무 전용복비(專用複肥)를 관발(關發)하여 1981-1982년(年)에 걸쳐 은기품종(銀寄品種)을 공시(供試)하여 여비시험(旅肥試驗)을 한 결과(結果)는 다음과 같다. 1. 밤나무의 생장량(生長量)은 함붕소복비구(含硼素複肥區)에서 대체(大體)로 양호(良好)하였다. 2. 함붕소구(含硼素區)에서는 낙과방지효과(落果防止效果)가 커서 성숙구(成熟毬) 과수(果數)가 현저(顯著)하게 많았다. 3. 밤수량(收量)은 1982년도(年度) 경우 함붕소복비구(含硼素複肥區)에서 매우 높아 일반복비구(一般複肥區)에 비(比)해 6배(倍)나 되었다. 4. 함붕소복비시용(含硼素複肥施用)으로 토양(土壤) 및 식물체중(植物體中)의 붕소함량(硼素含量)이 높았으며 이는 밤나무의 생장촉진(生長促進), 낙과방지(落果防止)에 영향을 주어 밤 증수(增收)에 기여 하였다고 판단(判斷)된다. 5. 밤의 획기적증수(劃期的增收)를 기(期)하기 위(爲)하여는 밤나무 전용복비(專用複肥)의 시용(施用)은 불가피(不可避)한 것으로 생각된다.

• 대한기계학회논문집A
• /
• 제40권1호
• /
• pp.41-51
• /
• 2016

볼나사 시스템은 볼과 그루브 사이에서 발생하는 마찰에 의해 온도가 상승하며, 이에 따른 열변형이 이송계의 위치결정 정도를 저하시킨다. 이를 보상하기 위해서는 볼나사 온도분포의 우선적 예측이 필요하다. 본 논문에서는 나사축 회전속도에 따른 온도분포를 해석하기 위해 볼나사 축과 너트를 각각 실린더와 중공 실린더로 가정한다. 경계조건인 대류 열전달계수, 볼과 그루브에서 발생하는 마찰토크와 접촉열전도를 볼나사 운전 및 조립 조건에 대하여 정식화 한다. 그리고, 현시적 유한차분법을 적용한 온도 분포 예측 시뮬레이터를 개발하고 그 유용성을 검증한다.

• 한국산림과학회지
• /
• 제74권1호
• /
• pp.82-87
• /
• 1986

대다수의 잣나무가 잣을 수확(收穫)하는 과정에서 수간(樹幹) 정단부(頂端部)의 인위적인 손상으로 말미암아 전형적인 잣나무 수형(樹型)을 잃게되는 점에 착안하여, 정상적으로 생육한 낙엽송과 비교하여 임본(林木) 제형질(諸形質)들의 관계를 조사 연구하였다. 동령급(同齡 級)의 두 수종(樹種)을 비교한 결과, 잣나무는 원단부(原端部)의 절단(切斷)으로 인하여 정상적인 수고생장(樹高生長)을 못하고 있음을 알 수 있으며, 또한 심하게 분간(分幹)되거나 굴곡된 수간(樹幹)은 이용재적(利用材積) 값을 낮추는 결과를 초래하여 본재생산(木材生産)의 측면에서는 바람직한 수형(樹型)을 갖지 못하고 있었다. 그러나 잣을 수확(收穫)할 수 있고 용재(用材)를 생산할 수 있는 잣나무의 특성을 감안하여, 조림투자(造林投資)에 대한 회수율(回收率)을 최대화하기 위한 잣나무 식재림(植栽材)에 대한 경영적(經營的) 대안(代案)을 제시하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권9호
• /
• pp.4725-4732
• /
• 2012

Aim: The incidence of stomach cancer in Mizoram is highest in India. We have conducted a population based matched case-control study to identify environmental and genetic risk factors in this geographical area. Methods: A total of 102 histologically confirmed stomach cancer cases and 204 matched healthy population controls were recruited. GSTM1 and GSTT1 genotypes were determined by PCR and H. pylori infections were determined by ELISA. Results: Tobacco-smoking was found to be an important risk factor for high incidence of stomach cancer in Mizoram. Meiziol (local cigarette) smoking was a more important risk factor than other tobacco related habits. Cigarette, tuibur (tobacco smoke infused water) and betel nut consumption synergistically increased the risk of stomach cancer. Polymorphisms of GSTM1 and GSTT1 genes were not found to be directly associated with stomach cancer in Mizoram. However, they appeared to be effect modifiers. Persons habituated with tobacco smoking and/or tuibur habit had increased risk of stomach cancer if they carried the GSTM1 null genotype and GSTT1 non-null genotype. Conclusion: Tobacco smoking, especially meiziol is the important risk factor for stomach cancer in Mizoram. GSTM1 and GSTT1 genes modify the effect of tobacco habits. This study is a first step in understanding the epidemiology of stomach cancer in Mizoram, India.