• Journal of computational fluids engineering
• /
• v.9 no.2
• /
• pp.43-51
• /
• 2004

Interaction between fluid flow and thermal radiation has received considerable attention due to its numerous applications in engineering field. In this case the thermofluid properties of radiating fluid vary with the variation of temperature field caused by absorption and emission of radiant heat. To analyze the radiation heat transfer in radiating fluid, the simultaneous solution of the radiative transfer equation (RTE) and the fluid dynamics equations is required. This means that the numerical procedure used for the RTE must be computationally efficient to permit its inclusion in the other submodels, and must be compatible with the other transport equations. The finite volume method (FVM) and the discrete ordinates method (DOM) are usually employed to simulate radiation problems in generalized coordinates. These two representative methods are examined and compared, especially in view of the numerical integration of the radiation intensity over solid angle. The FVM shows better accuracy than the DOM owing to less constraints of the selection of control angle.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.62-70
• /
• 2004

Interaction between fluid flow and thermal radiation has received considerable attention due to its numerous applications in engineering field. In this case the thermofluid properties of radiating fluid vary with the variation of temperature field caused by absorption and emission of radiant heat. To analyze the radiation heat transfer in radiating fluid, the simultaneous solution of the radiative transfer equation (RTE) and the fluid dynamics equations is required. This means that the numerical procedure used for the RTE must be computationally efficient to permit its inclusion in the other submodels, and must be compatible with the other transport equations. The finite volume method (FVM) and the discrete ordinates method (DOM) are usually employed to simulate radiation problems in generalized coordinates. These two representative methods are examined and compared, especially in view of the numerical integration of the radiation intensity over solid angle. The FVM shows better accuracy than the DOM owing to less constraints of the selection of control angle.

• Journal of Korean Society of Transportation
• /
• v.9 no.2
• /
• pp.121-126
• /
• 1991

Wilson made an importent contribution to develop a trip distribution model with the general form of gravity model which is an entropy maximization program. Also Wilson suggested a technique which is called the "iterative balancing method" for soving the model. This te-chnique however is not stable to find solution because it is a heuristic method and sometimes does not converge to the correct solution. In this paper a new solution method using a numerical method for solving the non-linear simultaneous equation system is developed and evaluated in both computers VAX 8700 and PC/AT 286 The result of this method and Wilson's method are compared with each other. Wilson's method resulted in inferior solutions measured by the final norm of residuals.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.799-804
• /
• 1993

In this paper, the scheme of combining the orbit correction and attitude control of a 3-axis stabilized satellite is suggested. Being coupled and complimentary, it is preferable to achieve the required orbit correction and the desired attitude control simultaneously. A solution of the probes simultaneous control of orbit correction and attitude of a satellite, is obtained by solving the two point boundary value problem numerically. The first-order gradient algorithm is used to solve the numerical problem. The simulation results show that the East-West station keeping process with the combined system of an orbit correction and an attitude control is satisfactory.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2721-2723
• /
• 2002

Electrical impedance tomograpy(EIT) determines the resistivity distribution inside an inhomogeneous target by means of voltage and current measurements conducted at the target boundary. In this paper, a simultaneous perturbation stochastic approximation(SPSA) approach is proposed for the solution of the EIT image reconstruction. Results of numerical experiments of EIT solved by the SPSA approach are presented and compared to that obtained by the modified Newton-Raphson(mNR) method.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.67-69
• /
• 2009

This paper deals with the consensus problem for multi-agent linear dynamic systems with parameter uncertainties. All the agents are identical high-order linear systems with parameter uncertainties and their state information is exchanged through a communication network. It is shown that a consensus is achieved if there exists a feasible solution to a set of linear matrix inequalities obtained for a simultaneous stabilization problem for multiple systems. A numerical example is presented to show the effectiveness of the proposed method.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.88-90
• /
• 2009

This paper deals with the consensus problem for multi-agent linear dynamic systems with communication delay. All the agents are identical high-order linear systems and their state information is exchanged through a communication network with constant communication delay. It is shown that a consensus is achieved if there exists a feasible solution to a set of linear matrix inequalities obtained for a simultaneous stabilization problem for multiple systems with delay. A numerical example is presented to show the effectiveness of the proposed method.

• Smart Structures and Systems
• /
• v.21 no.4
• /
• pp.449-467
• /
• 2018

In this paper, a theoretical and numerical study on bridge simultaneous damage detection procedure for identifying both the system parameters and input excitation mass, are presented. This method is called 'Adjoint Variable Method' which is an iterative gradient-based model updating method based on the dynamic response sensitivity. The main advantage of proposed method is inclusion of an analytical method to augment the accuracy and speed of the solution. Moving mass is a model which takes into account the inertia effects of the vehicle. This interaction model is a time varying system and proposed method is capable of detecting damage in this variable system. Robustness of proposed method is illustrated by correctly detection of the location and extension of predetermined single, multiple and random damages in all ranges of speed and mass ratio of moving vehicle. A comparison study of common sensitivity and proposed method confirms its efficiency and performance improvement in sensitivity-based damage detection methods. Various sources of errors including the effects of measurement noise and initial assumption error in stability of method are also discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.1-8
• /
• 1990

In this paper, the transient electromagneti wave scattering at dielectric cylinder is studied by new numerical analysis method. Basic formulation of boundary integral equation (BIE) for numerical method is started weighted residual technique. BIE is made to two simultaneous equation at surface inner and outside point of dielectric cylinder in extended boundary condition (EBC) and surface boundary condition (SBC). Numerical method is used Boundary element method (BEM) that is two form, one is direct method and the other is indirect method, so that this method that transformes operator inversion martics is used numerical analysis. A good agreement of this numerical solution and the other results is obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.252-262
• /
• 2004

A model of simultaneous heat and mass transfer process in absorption of refrigerant vapor into a lithium bromide solution of water-cooled vertical plate absorber. which was considered to the change of refrigerant vapor pressure along the plate width direction. was developed to evaluate the compactness of plate absorber and supply basis data for optimal design of plate absorber. The effects of plate interval as well as the effect of capacity for one piece of plate absorber on plate absorber size such as plate height. plate heating area and plate absorber volume have been investigated. It is confirmed that there is exist an optimal plate interval minimizing plate absorber volume. And the smaller capacity for one piece of plate absorber. the smaller plate absorber volume is obtained.