• Design & Manufacturing
• /
• 제2권2호
• /
• pp.43-47
• /
• 2008

This paper is concerned with the analysis of material flow characteristics of stepped rod forming. The analysis in this paper concentrated on the evaluation of the design parameters for deformation patterns of tube forming, load characteristics, extruded length, and die pressure. The design factors such as punch nose radius, die corner radius, friction factor, and punch face angle are involved in the simulation. The stepped rod forming is analyzed by using a commercial finite element code. This simulation makes use of stepped rod material and punch geometry on the basis of punch geometry recommended by International Cold Forging Group. As radius ratio is large, forming load was reduced but extruded length ratio was increased.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.91-101
• /
• 1998

The effect of secondary flow on both methane/air and propane/air premixed flame was investigated experimentally. By changing the radius of curvature, various flame behavior was observed. In the V-bend nozzles, flame surface is deformed from axisymmetry. As the exit velocity increased, flame lifted off partially. When the radius of curvature of the V-bend increased, the region where premixed flame is entirely on the rim increased. Since the axial velocity field is changed due to the secondary flow effect, comparison of V-bend and straight tube with the same diameter shows larger V-bend nozzle exit velocity for both flash back and flame blowout. The flame characteristics are mapped with a equivalence ratio, a velocity, and a nozzle radius of curvature. To identify physical reasoning on the flame surface deformation, numerical calculations are conducted. OH radical distributions in flames are visualized by PLIF technique.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.531-535
• /
• 2008

Present study examines the detonation wave propagation characteristics in annular channel. A normalized value of channel width to the annular radius was considered as a geometric parameter. Numerical approaches used in the previous studies of detonation wave propagation were extended to the present study with OpenMP parallelization for multicore SMP machines. The major effect of the curved geometry on the detonation wave propagation seems to be a flow compression effect, regardless of the detonation regimes. The flow compression behind the detonation wave by the curved geometry of the circular channel pushes the detonation wave front and results in the overdriven detonation waves with increased detonation speed beyond the Chapmann-Jouguet speed. This effect gets stronger as the normalized radius smaller, as expected. The effect seems to be negligible beyond the normalized radius of 10.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.1-7
• /
• 2016

In the present study, the homogeneous model is used to simulate the natural convection heat transfer of the CuO-water nanofluid in a concentric annular enclosure. Simulations have been carried while the Rayleigh number ranges from $10^3$ to $10^6$, solid volume fraction ranges from 0.01 to 0.04 and the radius ratio varies between 0.1 and 0.7. Results are presented in the form of streamlines, isotherm patterns and averaged Nusselt numbers for different values of solid volume fraction, radius ratio of the annulus and Rayleigh numbers. The results show that by decreasing the radius ratio and/or increasing the Rayleigh number, the averaged Nusselt number increases. Also the heat transfer rate increases as increased solid volume fractions.

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.51-60
• /
• 2007

This paper presents an algorithm of optimal cutting tool selection for machining of the point-based surface that is defined by a set of surface points rather than parametric polynomial surface equations. As the ball-end and fillet-end mills are generally used for finish machining in a 3-axis computer numerical control machine, the algorithm is applicable for both cutters. The optimum tool would be as large as possible in terms of the cutter radius and/or corner radius which maximise (s) the material removal rate (i.e., minimise (s) the machining time), while still being able to machine the entire point-based surface without gouging any surface point. The gouging are two types: local and global. In this paper, the distance between the cutter bottom and surface points is used to check the local gouging whereas the shortest distance between the surface points and cutter axis is effectively used to check the global gouging. The selection procedure begins with a cutter from the tool library, which has the largest cutter radius and/or corner radius, and then adequacy of the point-density is checked to limit the accuracy of the cutter selection for the point-based surface within tolerance prior to the gouge checking. When the entire surface is gouge-free with a chosen cutting tool then the tool becomes the optimum cutting tool for a list of cutters available in the tool library. The effectiveness of the algorithm is demonstrated considering two examples.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.124-129
• /
• 2004

초 록 : 확산화염 시뮬레이션에 대해 수치법을 검증하고 변형률과 연료농도가 화염반경과 두께의 변화에 미치는 영향을 조사하기 위해, Fire Dynamics Simulator (FDS)를 사용하여 무중력의 비예혼합 메탄-공기 대향류 화염을 축대칭으로 모사하였다. 연료 중 메탄의 몰분율 $X_m=20,\;50,\;80\%$와 각각의 몰분율에서 세 가지 변형률 $a_g=20,\;60,\;90s^{-1}$의 $1000^{\circ}C$ 기준 화염반경과 화염두께를 조사하였다. 변형률이 클수록 화염반경은 증가하였으나 화염두께는 거의 선형적으로 감소하였다. 또 화염반경은 메탄농도가 높을수록 감소하였으나, 변형률의 영향만큼 메탄농도에 민감하지 않았다. FDS와 OPPDIF로 각각 구한 무차원 화염두께가 잘 일치하므로, 넓은 범위의 연료농도와 변형률에서 FDS가 대향류 확산화염의 화염구조를 잘 예측할 수 있음을 확인하였다.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.128-134
• /
• 2012

In this manuscript, we consider electromagnetic imaging of perfectly conducting cracks completely hidden in a homogeneous material via boundary measurements. For this purpose, we carefully derive a topological derivative formula based on the asymptotic expansion formula for the existence of a perfectly conducting inclusion with a small radius. With this, we introduce a topological derivative based imaging algorithm and discuss its properties. Various numerical examples with noisy data show the effectiveness and limitations of the imaging algorithm.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.959-964
• /
• 2007

In this study, it is offering a numerical method which assesses running safety of the freight car loaded CWR when passing through on the conventional railway by additional lateral load. It is suggested based on the numerical reviews of the safety against derailment after seeking the derailment coefficient estimated by wheel load-lateral force equation in the section that curve radius is small

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.301-304
• /
• 2015

With the experiment observation of single particle combustion, this model is built for the numerical analysis of the process. It's about the single coal particle combustion process under different conditions with reasonable assumptions. The model can express the mass, radius, density, temperature changing with different particle sizes, oxygen concentration and gas temperature. It also includes the flame sizes change in different condition and the diffusion of each species. The result shows the characters of the combustion.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.44-49
• /
• 2002

A study of free vibration of axisymmetric circular plates based on Mindlin theory using a pseudospectral method is presented. The analysis is based on Chebyshev polynomials that are widely used in the fluid mechanics research community. Clamped, simply supported and flee boundary conditions are considered, and numerical results are presented for various thickness-to-radius ratios.