• 전자공학회논문지C
• /
• 제34C권11호
• /
• pp.29-38
• /
• 1997

As the trend of the automation is increasing, the usage of the programmable automation equipments like programmable controller(PC), numerical controller(NC), distributed control systems(DCS) and robot controller is greatly expanding in the area of the industrial equipments. But the development of the programing language for the programmable automatic equipment is rarely accomplished. In this paper, we propose design and implementation technique of the real-time mechanism control language by adding time constraint constructs and timing analysis constructs ot conditional statement and iteration statement of a programming language. Moreover, we made it possible to predict plausibility of time constraint constructs of a real time application program at compilation time and developing execution time analysiss technique.

• Journal of applied mathematics & informatics
• /
• 제4권1호
• /
• pp.1-16
• /
• 1997

In this paper we study efficient parallel implementation for hybrid iterative methods BICGSTAB and BICGSTAB $(\ell)$ with ${Well}=2$ on the CRAY C90 and the efficiency of their parallel performance is evaluated. numerical experiments suggest that on the CRAY C90 a parallel inner product algorithm called PDOTB be used for the par-allelization of hybrid iterative methods containing sensitive values of inner products. Lastly it is shown that the number of iterations in which parallel hybrid iterative methods satisfy a certain convergence criterion depends on the number of processors to be used.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.336-340
• /
• 2001

We propose an implicit numerical implementation for the Leblond's transformation plasticity constitutive equations, which are widely used in welded steel structure. We apply generalized trapezoidal rule to integrate the equations and determine the consistent tangent moduli. The implementation may be used with updated Lagrangian formulation. We test a simple butt-welding process to compare with SYSWELD and discuss the accuracy.

• Journal of applied mathematics & informatics
• /
• 제33권1_2호
• /
• pp.33-44
• /
• 2015

The convergence rate of a numerical procedure based on Schwarz Alternating Method(SAM) for solving elliptic boundary value problems depends on the selection of the interface conditions applied on the interior boundaries of the overlapping subdomains. It has been observed that the Robin condition (mixed interface condition), controlled by a parameter, can optimize SAM's convergence rate. In [7], one formulated the multi-parameterized SAM and determined the optimal values of the multi-parameters to produce the best convergence rate for one-dimensional elliptic boundary value problems. Two-dimensional implementation was presented in [8]. In this paper, we present an implementation for three-dimensional problem.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.997-1002
• /
• 2001

This paper describes an implementation of inverse filter using SVD in order to recover the input in multi-channel system. The matrix formulation in SISO system is extended to MIMO system. In time and frequency domain we investigates the inversion of minimum phase system and non-minimum phase system. To execute an effective inversion of non-minimum phase system, SVD is introduced. First of all we computes singular values of system matrix and then investigates the phase property of system. In case of overall system is non-minimum phase, system matrix has one (or more) very small singular value(s). The very small singular value(s) carries information about phase properties of system. Using this property, approximate inverse filter of overall system is founded. The numerical simulation shows potentials in use of the inverse filter.

• Steel and Composite Structures
• /
• 제24권5호
• /
• pp.537-548
• /
• 2017

In this paper presents bending characteristic of single wall carbon nanotube reinforced functionally graded composite (SWCNTRC-FG) plates. The finite element implementation of bending analysis of laminated composite plate via well-established higher order shear deformation theory (HSDT). A seven degree of freedom and $C^0$ continuity finite element model using eight noded isoperimetric elements is developed for precise computation of deflection and stresses of SWCNTRC plate subjected to sinusoidal transverse load. The finite element implementation is carried out through a finite element code developed in MATLAB. The results obtained by present approach are compared with the results available in the literatures. The effective material properties of the laminated SWCNTRC plate are used by Mori-Tanaka method. Numerical results have been obtained with different parameters, width-to-thickness ratio (a/h), stress distribution profile along thickness direction, different SWCNTRC-FG plate, boundary condition, through the thickness (z/h) ratio, volume fraction of SWCNT.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권4호
• /
• pp.166-171
• /
• 2006

In this paper, we have studied for analysis of the partial discharge(PD) signal in underground transmission line. The PD signal has estimated as detected signal accumulation of a PRPDA method by using Labview, and analyzed with fuzzy algorithm. In our algorithm, we developed system configuration that detected accumulating PD signal using by Labview and programmed fuzzy algorithm can be analyzed the PD signal using with Matlab. With practical PD logic implementation of theoretical detected system and hardware implementation, the device for Hipotronics Company's 50kV setup has generated and then has applied with $15k{\sim}17kV$ with 1:1 time probe. It's also used the LDPE 0.27mmt (scratch error 0.05mmt) to sample for making PD. In conclusion, Our new class of PD detected algorithm has also compared with previous PRPDA or Fuzzy algorithm. which has diagnose more conveniently by adding numerical values.

• International Journal of Control, Automation, and Systems
• /
• 제2권4호
• /
• pp.494-500
• /
• 2004

The wing rock phenomenon is a high angle of attack aerodynamic motion manifested by limit cycle roll oscillations. Experimental studies reveal that direct control and manipulation of leading edge vortices, through the use of 'blowing' techniques is effective in the suppression of wing rock. This paper presents the design of a robust controller for the experimental implementation of one such 'blowing' technique - recessed angle spanwise blowing (RASB), to achieve wing rock suppression over a range of operating conditions. The robust controller employs Takagi - Sugeno fuzzy system, which is fine-tuned by experimental simulations. Performance of the controller is assessed by real-time wind tunnel experiments with an 80 degree swept back delta wing. Robustness is demonstrated by the suppression of wing rock at a range of angles of attack and free stream velocities. Numerical simulation results are used to further substantiate the experimental findings.

• Industrial Engineering and Management Systems
• /
• 제14권4호
• /
• pp.401-412
• /
• 2015

In this paper, we present a modeling approach to production planning for an actual production line and a heuristic method. We also illustrate the successful implementation of the proposed method on the production line. A heuristic algorithm called the push-back algorithm was designed for a single machine earliness/tardiness production planning with distinct due date. It was developed by combining a minimum slack time rule and shortest processing time rule with a push-back procedure. The results of a numerical experiment on the heuristic's performance are presented in comparison with the results of IBM ILOG CPLEX. The proposed algorithm was applied to an actual case of production planning at Woongjin Chemical, a leading manufacturer of filter products in South Korea. The seven-month execution of our algorithm led to a 24.5% decrease in the company's inventory level, thus demonstrating its practicality and effectiveness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1003-1005
• /
• 1998

We present the implementation of a Lagrangian Relaxation based large scale thermal Unit Commitment problem. The problem is decomposed into thermal subproblem by using Lagrangian multipliers. The thermal subproblem is solved by using dynamic programmmg. we perform a numerical test using the thermal system of KEPCO over a week (168 hours) period. The programming language used for the test program is C. The result is compared with the priority list method.