• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.1
• /
• pp.19-27
• /
• 2021

Hydroponic farming is a method to grow a plant without soil. Plants can be grown on water or hydroponic growing media, and they are fed with mineral nutrient solutions, which are fertilizers dissolved into water. Hydroponic farming has the advantage of increasing plant productivity over conventional greenhouse farming. Previous studies of hydroponic nutrient wastewater from acyclic hydroponic farms pointed out that hydroponic nutrient wastewater contained residual nutrients, and they were drained to a nearby river bank which causes several environmental issues. Also, previous studies suggest that excessive use of the nutrient solution and disposal of used hydroponic growing media and crop wastes in hydroponic farms are major problems to hydroponic farming. This study was conducted to determine the impact of hydroponic nutrient wastewater, used hydroponic growing media, and crop wastes from acyclic hydroponic farms on the surrounding environment by analyzing water quality and soil analysis of the above three factors. Three soil cultivation farms and several hydroponic farms in the Gangwon C region were selected for this study. Samples of water and soils were collected from both inside and outside of each farm. Also, a sample of soil and leachate from crop waste piles stacked near the farm was collected for analysis. Hydroponic nutrient wastewater from acyclic hydroponic farm contained an average of 402 mg/L of total nitrogen (TN) concentration, and 77.4 mg/L of total phosphate (TP) concentration. The result of TP in hydroponic nutrient wastewater exceeds the living environmental standard of the river in enforcement decree of the framework act on environmental policy by 993.7 times. Also, it exceeds the standard of industrial wastewater discharge standards under the water environment conservation act by 6~19 times in TN, and 2~27 times in TP. Leachate from crop waste piles contained 11,828 times higher COD and 395~2662 times higher TP than the standard set by the living environmental standard of the river in enforcement decree of the framework act on environmental policy and exceeds 778 times higher TN and 5 times higher TP than the standard of industrial wastewater discharge standards under the water environment conservation act. For more precise studies of the impact of hydroponic nutrient wastewater, used hydroponic growing media, and crop wastes from acyclic hydroponic farms on the surrounding environment, additional information regarding a number of hydroponic farms, arable area(ha), hydroponic farming area, seasonal, weather, climate factor around the river, and the property of the area and farm is needed. Analysis of these factors and additional water and soil samples are needed for future studies.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.374-390
• /
• 2021

Growth and yield of field vegetable crops would be affected by climate conditions, which cause a relatively large fluctuation in crop production and consumer price over years. The yield prediction system for these crops would support decision-making on policies to manage supply and demands. The objectives of this study were to compile literatures related to onion and garlic and to perform data-mining analysis, which would shed lights on the development of crop models for these major field vegetable crops in Korea. The literatures on crop growth and yield were collected from the databases operated by Research Information Sharing Service, National Science & Technology Information Service and SCOPUS. The keywords were chosen to retrieve research outcomes related to crop growth and yield of onion and garlic. These literatures were analyzed using text mining approaches including word cloud and semantic networks. It was found that the number of publications was considerably less for the field vegetable crops compared with rice. Still, specific patterns between previous research outcomes were identified using the text mining methods. For example, climate change and remote sensing were major topics of interest for growth and yield of onion and garlic. The impact of temperature and irrigation on crop growth was also assessed in the previous studies. It was also found that yield of onion and garlic would be affected by both environment and crop management conditions including sowing time, variety, seed treatment method, irrigation interval, fertilization amount and fertilizer composition. For meteorological conditions, temperature, precipitation, solar radiation and humidity were found to be the major factors in the literatures. These indicate that crop models need to take into account both environmental and crop management practices for reliable prediction of crop yield.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.202-217
• /
• 2022

Purpose: The recent increased use of Personal Mobility (PM) has been accompanied by a rise in the annual number of accidents. Accordingly, the safety requirements for PM use are being strengthened, but the laws/systems, infrastructure, and management systems remain insufficient for fostering a safe environment. Therefore, this study comprehensively searches the main problems and improvement methods through a review of previous studies that are related to PM. Then the priorities according to the importance of the improvement methods are presented through the Delphi survey. Method: The research method is mainly composed of a literature study and an expert survey (Delphi survey). Prior research and improvement cases (local governments, government departments, companies, etc.) are reviewed to derive problems and improvements, and a problem/improvement classification table is created based on keywords. Based on the classification contents, an expert survey is conducted to derive a priority improvement plan. Result: The PM-related problems were in 'non-compliance with traffic laws, lack of knowledge, inexperienced operation, and lack of safety awareness' in relation to human factors, and 'device characteristics, road-drivable space, road facilities, parking facilities' in relation to physical factors. 'Management/supervision, product management, user management, education/training' as administrative factors and legal factors are divided into 'absence/sufficiency of law, confusion/duplication, reduced effectiveness'. Improvement tasks related to this include 'PM education/public relations, parking/return, road improvement, PM registration/management, insurance, safety standards, traffic standards, PM device safety, PM supplementary facilities, enforcement/management, dedicated organization, service providers, management system, and related laws/institutional improvement', and 42 detailed tasks are derived for these 14 core tasks. The results for the importance evaluation of detailed tasks show that the tasks with a high overall average for the evaluation items of cost, time, effect, urgency, and feasibility were 'strengthening crackdown/instruction activities, education publicity/campaign, truancy PM management, and clarification of traffic rules'. Conclusion: The PM market is experiencing gradual growth based on shared services and a safe environment for PM use must be ensured along with industrial revitalization. In this respect, this study seeks out the major problems and improvement plans related to PM from a comprehensive point of view and prioritizes the necessary improvement measures. Therefore, it can serve as a basis of data for future policy establishment. In the future, in-depth data supplementation will be required for each key improvement area for practical policy application.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.3
• /
• pp.234-244
• /
• 2021

Purpose: To date, studies of firearm and explosive injuries in the Korean military have been limited compared to its importance. To overcome this, this study examined the characteristics of musculoskeletal damages in soldiers who have suffered firearm and explosive injuries over the past four years. Materials and Methods: From January 2015 to July 2019, military forces who had suffered musculoskeletal injuries from firearms or explosive substances were included. The medical records and radiographs were reviewed retrospectively, and telephone surveys about Short Musculoskeletal Functional Assessment (SMFA) for this group were conducted. To compare the functional outcomes, statistical analysis was performed using a t-test for the types of weapons, and ANOVA for others. Results: Of the 61 patients treated for firearms and explosives injuries, 30 patients (49.2%) were included after undergoing orthopedic treatment due to musculoskeletal injury. The average age at injury was 26.4 years old (21-52 years old). The number of officers and soldiers was similar. Eleven were injured by gunshot and 19 by an explosive device. Sixteen were treated in the Armed Forces Capital Hospital and 10 at private hospitals. More than half of the 16 patients (53.3%) with a fracture had multiple fractures. The most common injury site was the hand (33.3%), followed by the lower leg (30.0%). There were 14 patients (46.7%) with Gustilo-Anderson classification 3B or higher who required a soft tissue reconstruction. Fifteen patients agreed to join the SMFA survey for the functional outcomes. Between officers and soldiers, officers had better scores in the Bother Index compared to soldiers (p=0.0045). Patients treated in the Armed Forces Capital Hospital had better scores in both the Dysfunction and Bother Index compared to private hospitals (p=0.0008, p=0.0149). Conclusion: This is the first study to analyze of weapons injuries in the Korean military. As a result of the study, the orthopedic burden was high in the treating patients with military weapon injuries. In addition, it is necessary to build a military trauma registry, including firearm and explosive injuries, for trauma treatment evaluation and development of military trauma system.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.4
• /
• pp.49-64
• /
• 2021

Apprenticeship education in Korea started approximately in 2005, and is divided into government-led apprenticeship education and Gyeonggi-do-led apprenticeship education. Apprenticeship education for textile and clothing-related majors in Korea is a very different process compared to Germany, where the country, companies, and schools have cooperated with each other with a long tradition, and there are many points to be supplemented. In order to explore the literature on apprenticeship education in Germany and Korea, and to understand the phenomena or actual conditions that have not been shown in the literature, interviews were conducted with two German professors living in South Korea. As a result of the analysis, Germany's long tradition and positive perception of vocational education are the basis for the establishment of apprenticeship education, and it is positioned as a system of education process. Various associations related to apprenticeship education make systematic training manuals, and then distribute certificates to trainees who have completed these courses. Therefore, companies promote the stability of the job market by educating local talents through apprenticeship training to nurture industrial manpower. Currently, in Korea's apprenticeship education, a series of procedures for developing educational courses such as company discovery and job analysis for each company are entirely entrusted to vocational high schools. Therefore, public confidence and solidity in apprenticeship education were found to be insignificant. This study has limitations in that it cannot confirm a phenomenon that has not been shown in the literature review, there is insufficient research on German literature, and the number of samples interviewed is small. However, if, based on the results of this study, an association dedicated to apprenticeship education is created in Korea and a systematic curriculum is developed, it will be able to contribute to establishing the stability of the textile and apparel labor market in the future.

• Journal of the Korean Society of Radiology
• /
• v.16 no.1
• /
• pp.35-43
• /
• 2022

In this study, a survey was conducted and analyzed to find out the satisfaction of online classes among students enrolled in the radiology department of a university located in Busan city. As a result, in terms of satisfaction with online classes, male scores were higher, but there was no statistically significant difference. In the interdisciplinary system, the satisfaction score of the students enrolled in Bachelor's degree was high, and there was a statistically significant difference except for the satisfaction of learning participation (p<0.001, p<0.05). For class satisfaction by grade level, Senior had higher scores, and there were statistically significant differences except for learning participation satisfaction (p<0.001, p<0.01, p<0.05). In the satisfaction survey according to the number of lectures, the scores of the students who took 4-7 lectures were found to be high except for the satisfaction of learning participation, and there was a statistically significant difference (p<0.01, p<0.05). In the method of communication with the instructor, students who used e-mail showed high scores, and there was a statistically significant difference in lecture satisfaction (p<0.05). In the correlation analysis between sub-variables for online classes, statistically significant correlations were established in all areas. Most of the students preferred class methods such as recorded classes and classes using external content such as YouTube, and when asked about the merits of online classes, many students answered that the advantages of online classes were repetitive classes and no restrictions on time and place. When asked about the shortcomings of online classes, many students answered that it was a lack of concentration and lack of communication with the instructor. This study was conducted to provide basic data to improve the satisfaction of online classes that will increase in the future. Therefore, based on the results of this study, it is expected that more quality online classes will be produced so that students' satisfaction with online classes can be improved.

• Maritime Security
• /
• v.4 no.1
• /
• pp.57-82
• /
• 2022

The objective of this treatise is to explore the limitations of the current navy manpower utilization system and the ways to improve it from the perspective of Generation Z. As Generation Z, following Millennials, has finally come of age, this new group is constituting a gradually greater proportion of military personnel. Due to the typical characteristics of naval operations, the harmony between Millennials and Generation Z, which is differentiated from Generation X in view of dispositions and traits, is one of the essential issues to be discussed. Generally, in a naval vessel, there are numerous pieces of equipment necessary to carry out a wide range of missions and a large number of crew members who operate them with consistent levels of fighting power. This is all while members are living together within the narrow space throughout the 24 hours of each day. Under such particular circumstances, any inter-generational conflicts may have a disruptive effect on the successful accomplishment of naval missions. Currently, new generations of military personnel are facing social difficulties in different aspects compared with the previous generations, and also have different viewpoints on the military. In this regard, in order to foster true harmony between generations, it is considered necessary to take a closer look at the inter-generational differences from their respective standpoints and to examine whether the military organization has taken adequate steps to respond to such changes. Accordingly, Chapters 1 and 2 cover the environments in which Millennials and Generation Z were raised during their childhood to young adulthood, which are distinct from those of older generations, their viewpoints formed based on such backgrounds, and the need to resolve various conflicts between generations. In Chapter 3, the current actions taken by overseas military powers to enhance the coexistence with Generation MZ are analyzed to find the significant implications they had. Chapter 4 examines the operation environments specific to the navy; identifies the potential barriers to achieving harmony between generations by assessing the current status of personnel utilization in the Korean navy in terms of the seaman, petty officer, and the officer, as well as policy; and outlines the solutions to drive harmony. Finally, Chapter 5 emphasizes the need to establish a genuine empathy between generations based on the understanding of unique inter-generational characteristics. This section also discusses the importance of addressing difficulties in utilizing technology-centered naval manpower, and forecasts a scenario of a naval organization that resolves the problem of utilizing naval personnel and the inter-generational conflicts in the future.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.345-353
• /
• 2022

This study aimed to fundamentally understand changes of cell parameters of cation-exchanged mordenites using high resolution X-ray powder diffraction for studies that immobilization of various heavy metal cation using synthesis mordenite (Na_6.6Al_6.6Si_41.4O₉₆·20.4H₂O, Na-MOR). As a results of measurement by Thermogravimetric analysis (TGA), it was confirmed that 19.4, 20.4 water molecules per unit cell were present in monovalent-cation substituted MOR (Cs-MOR, Na-MOR), and 21, 23.1, 23.2 water molecules per unit cell were present in divalent-cation substituted MOR (Pb-MOR, Sr-MOR, Cd-MOR). The space group of all the samples were identified as Cmcm belonging to the orthorhombic crystal system. Compared to Na-MOR, starting material, relative peak intensity of (110) and (200) is significantly changed after cation substitution whereas peak position is almost similar. Also, (220) peak that was not found in Na-MOR was clearly observed in Pb-, Cd- and Sr-exchanged MOR. Thus, it was estimated that changes of atomic distribution usually occurred on ab-plane while changes of cell parameters were little. Detailed changes in the cell parameters of cation-exchanged mordenites were derived from whole profile fitting method using the GSAS suite program. Changes in the axial lengths and unit cell volume of cation substitution showed different relationship depending on ionic radius and charge number. In case of monovalent-cation substituted MOR, the length of a-axis increases whereas the length of b- and c-axis decrease by absorbed cation radius. In the case of divalent-cation exchanged MOR, the length of a-axis usually decreases while the length of b- and c-axis increases by cation radius. It was confirmed that unit cell volume of monovalent and divalent cation substituted MORs had an independent tendency by cation radius.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.143-174
• /
• 2023

With the development of deep learning technologies, Artificial Intelligence powered Optical Character Recognition (AI-OCR) has evolved to read multiple languages from various forms of images accurately. For the financial industry, where a large number of diverse documents are processed through manpower, the potential for using AI-OCR is great. In this study, we present a configuration and a design of an AI-OCR modality for use in the financial industry and discuss the platform construction with application cases. Since the use of financial domain data is prohibited under the Personal Information Protection Act, we developed a deep learning-based data generation approach and used it to train the AI-OCR models. The AI-OCR models are trained for image preprocessing, text recognition, and language processing and are configured as a microservice architected platform to process a broad variety of documents. We have demonstrated the AI-OCR platform by applying it to financial domain tasks of document sorting, document verification, and typing assistance The demonstrations confirm the increasing work efficiency and conveniences.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.169-176
• /
• 2008

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at $37^{\circ}C$ for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with ${\alpha}=0.05$. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).