• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.707-721
• /
• 2017

The objective of this paper is to experimentally study the consolidation of saturated silty clay subjected to repeated heating-cooling cycles using a modified temperature-controlled triaxial apparatus. Focus is placed on the influence of the water content, confining pressure, and magnitudes and number of thermal loading cycles. The experimental results show that the thermally induced pore pressure increases with increasing water content and magnitude of thermal loading in undrained conditions. After isothermal consolidation at an elevated temperature, the pore pressure continues to decrease and gradually falls below zero during undrained cooling, and the maximum negative pore pressure increases as the water content decreases or the magnitude of thermal loading increases. During isothermal consolidation at ambient temperature after one heating-cooling cycle, the pore pressure begins to rise due to water absorption and finally stabilizes at approximately zero. As the number of thermal loading cycles increases, the thermally induced pore pressure shows a degrading trend, which seems to be more apparent under a higher confining pressure. Overall, the specimens tested show an obvious volume reduction at the completion of a series of heating-cooling cycles, indicating a notable irreversible thermal consolidation deformation.

• Animal Bioscience
• /
• 제34권8호
• /
• pp.1375-1381
• /
• 2021

Objective: This study was conducted to determine the effect of freeze-thawed cycles (Fresh meat, F-T 1 cycle and F-T 2 cycles) on the quality characteristics of porcine longissimus dorsi muscle. Methods: A total of 20 three-crossbred pigs (Duroc×[Large White×Landrace]) were randomly obtained from a commercial slaughterhouse in Thailand. Muscle samples were immediately taken from 10 to 11th of the longissimus dorsi for histochemical analysis. The muscles were cut into 2.54 cm-thick chops. A minimum of 20 chops were used for each treatment (fresh meat, freeze-thawed 1 and 2 cycles). Individually chops were packaged in polyethylene bags and frozen at -20℃ for 6 months followed by thawing in refrigerator at 4℃ for 24 h (the 1st freeze-thawed cycle). The freeze-thawed procedure was repeated for two cycles (the 2nd freeze-thawed cycle). Thawing loss, shear force value, citrate synthase activity and muscle fiber characteristics were determined on the muscles. Results: Results showed that increasing of freeze-thawed cycle increased the thawing loss (p<0.01) and citrate synthase activity (p<0.001). Shear force value of fresh meat was higher than freeze-thawed 1 and 2 cycles (F-T 1 cycle and F-T 2 cycles). Freeze-thawed cycles affected muscle characteristics. Muscle fiber area and muscle fiber diameter decreased with an increasing number of freeze-thawed cycles (p<0.001), while the thickness of endomysium and perimysium were increased (p<0.001). Conclusion: Repeated freeze-thawed cycles degraded muscle fiber structure and deteriorated pork quality.

• 대한한방부인과학회지
• /
• 제26권3호
• /
• pp.73-84
• /
• 2013

Objectives: This study aims to identify associated factors in female infertility treatment using herbal medicine, acupuncture and moxibustion. Methods: Acupuncture and moxibustion treatments were performed with intake of herbal medicines (Jokyungjongoktanggagam-bang, Sutaehwangagam-bang) for six menstrual cycles in 32 subfertile women. The variables selected for initial analysis were age, duration and type of infertility, frequency of previous In Vitro Fertilization (IVF) and live births, weekly frequency of sexual intercourse, number of treatment cycles, endometrial thickness on MCD15 and hormonal parameter (anti-mullerian hormone, follicle-stimulating hormone, luteinizing hormone, estrone). Results: Six patients became pregnant (18.75%) and seven patients withdrew. Factors influenced pregnancy were age (${\leq}35$ years), a shorter duration of infertility (<6 years), frequency of IVF (${\leq}3$), anti-mullerian hormone level (>1 ng/ml), and number of treatment cycles(${\leq}3$ cycles). Conclusions: Korean medicine is a useful and optimized treatment option for women with younger age, fewer previous IVF cycles, shorter infertile duration and normal anti-mullerian hormone level at first 3 cycles of treatment.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.585-590
• /
• 2014

Microstructural evolution in the thickness direction of an oxygen free copper processed by accumulative rollbonding (ARB) is investigated by electron back scatter diffraction (EBSD) measurement. For the ARB, two copper alloy sheets 1 mm thick, 30 mm wide and 300 mm long are first degreased and wire-brushed for sound bonding. The sheets are then stacked and roll-bonded by about 50% reduction rolling without lubrication at an ambient temperature. The bonded sheet is then cut to the two pieces of the same dimensions and the same procedure was repeated on the sheets up to eight cycles. The specimen after 1 cycle showed inhomogeneous microstructure in the thickness direction so that the grains near the surface were finer than those near the center. This inhomogeneity decreased with an increasing number of ARB cycles, and the grain sizes of the specimens after 3 cycles were almost identical. In addition, the aspect ratio of the grains decreased with an increasing number of ARB cycles due to the subdivision of the grains by shear deformation. The fraction of grains with high angle grain boundaries also increased with continuing process of the ARB so that it was higher than that of the low angle grain boundaries in specimens after 3 cycles. A discontinuous dynamic recrystallization occurred partially in specimens after 5 cycles.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.41-46
• /
• 2013

The microstructural evolution of AA1050/AA6061 complex aluminum alloy, which is fabricated using an accumulative roll-bonding (ARB) process, with the proceeding of ARB, was investigated by electron back scatter diffraction (EBSD) analysis. The specimen after one cycle exhibited a deformed structure in which the grains were elongated to the rolling direction for all regions in the thickness direction. With the proceeding of the ARB, the grain became finer; the average grain size of the as received material was $45{\mu}m$; however, it became $6.3{\mu}m$ after one cycle, $1.5{\mu}m$ after three cycles, and $0.95{\mu}m$ after five cycles. The deviation of the grain size distribution of the ARB processed specimens decreased with increasing number of ARB cycles. The volume fraction of the high angle grain boundary also increased with the number of ARB cycles; it was 43.7% after one cycle, 62.7% after three cycles, and 65.6% after five cycles. On the other hand, the texture development was different depending on the regions and the materials. A shear texture component {001}<110> mainly developed in the surface region, while the rolling texture components {011}<211> and {112}<111> developed in the other regions. The difference of the texture between AA1050 and AA6061 was most obvious in the surface region; {001}<110> component mainly developed in AA1050 and {111}<110> component in AA6061.

• Clinical and Experimental Reproductive Medicine
• /
• 제44권1호
• /
• pp.47-51
• /
• 2017

Objective: This study was designed to report the status of assisted reproductive technology (ART) therapy in South Korea between January 1, 2012 and December 31, 2012. Methods: A localized online survey, originally developed by the International Committee Monitoring Assisted Reproductive Technologies, was first launched and provided to all available ART centers via email in 2015. Fresh embryo transfer (FET) cases were categorized as standard in vitro fertilization, intracytoplasmic sperm injection (ICSI), or half-ICSI. Thawed embryo transfer (TET) and other related procedures, including surgical sperm retrieval, were surveyed. Results: Data from 33,956 ovum pick-up procedures were provided by 75 clinics in 2012. Of the 33,088 cycles in which ovums were retrieved, a complete transfer was performed in 90.5% (29,932 cycles). In addition, 10,079 FET cycles were confirmed to have resulted in clinical pregnancy, representing a pregnancy rate of 30.5% per ovum pick-up and 33.7% per ET. The most common number of embryos transferred in FET was 2 (41.6%), followed by 3 (34.0%), and non-elective single ETs (10.0%). Of the 10,404 TET cycles in which transfer was completed, 3,760 clinical pregnancies (36.1%) were confirmed by ultrasonography. Conclusion: The overall clinical pregnancy rate for FET and TET cycles in 2012 was higher than in 2011 (33.7% vs. 33.2% and 36.1% vs. 31.1%, respectively). The most common number of embryos transferred in FET cycles was 2, unlike in 2011.

• 품질경영학회지
• /
• 제48권1호
• /
• pp.201-214
• /
• 2020

Purpose: The purpose of this paper is to determine an optimal number of cycle times for the replacement under the circumstance where the system is replaced at the periodic time and the multiple number of working cycles whichever occurs first and the system is minimally repaired between the replacements if it fails. Methods: The system is replaced at periodic time () or cycle time, whichever occurs first, and is repaired minimally when it fails between successive replacements. To determine the optimal number of cycle times, the expected total cost rate is optimized with respect to the number of cycle times, where the expected total cost rate is defined as the ratio of the expected total cost between replacements to the expected time between replacements. Results: In this paper, we conduct a sensitivity analysis to find the following results. First, when the expected number of failures per unit time increases, the optimal number of cycle times decreases. Second, when the periodic time for replacement becomes longer, the optimal number of cycle times decreases. Third, when the expected value for exponential distribution of the cycle time increases, the optimal number of cycle times increases. Conclusion: A mathematical model is suggested to find the optimal number of cycle times and numerical examples are provided through the sensitivity analysis on the model parameters to see the patterns for changes of the optimal number of cycle times.

• Kyungpook Mathematical Journal
• /
• 제45권1호
• /
• pp.45-53
• /
• 2005

A basis of the cycle space C (G) is d-fold if each edge occurs in at most d cycles of C(G). The basis number, b(G), of a graph G is defined to be the least integer d such that G has a d-fold basis for its cycle space. MacLane proved that a graph G is planar if and only if $b(G)\;{\leq}\;2$. Schmeichel showed that for $n\;{\geq}\;5,\;b(K_{n}\;{\bullet}\;P_{2})\;{\leq}\;1\;+\;b(K_n)$. Ali proved that for n, $m\;{\geq}\;5,\;b(K_n\;{\bullet}\;K_m)\;{\leq}\;3\;+\;b(K_n)\;+\;b(K_m)$. In this paper, we give an upper bound for the basis number of the semi-strong product of a bipartite graph with a cycle.

• Earthquakes and Structures
• /
• 제4권6호
• /
• pp.629-647
• /
• 2013

Loading protocols have been developed for quasi-static cyclic testing of structures and components. However, it is uncertain if protocols developed for conditions of intense ground shaking in regions of high seismicity would also be applicable to regions of low-moderate seismicity that are remote from the tectonic plate boundaries. This study presents a methodology for developing a quasi-static cyclic displacement loading protocol for experimental bracing evaluation of cold-formed steel stud shear walls. Simulations presented in the paper were based on conditions of moderate ground shaking (in Australia). The methodologies presented are generic in nature and can be applied to other regions of similar seismicity conditions (which include many parts of China, Korea, India and Malaysia). Numerous response time histories including both linear and nonlinear analyses have been generated for selected earthquake scenarios and site classes. Rain-flow cycle counting method has been used for determining the number of cycles at various ranges of normalized displacement amplitude. It is found that the number of displacement cycles of the loading protocol increases with increasing intensity of ground shaking (associated with a longer return period).

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.67-72
• /
• 1999

Scanning probe Microscope(SPM) such as Scanning Tunneling Microscope(STM) and Atomic Force Microscope(AFM) was shown to be the powerful tool for nano-scale characterization of material surfaces Using this technique, surface morphology of the cyclically deformed Cu or Cu-Al single crystal was observed. The surface became proportionately rough as the number of cycles increased, but after some number of cycles no further change was observed. Slip steps with the heights of 100 to 200 nm and the widths of 1000 to 2000 nm were prevailing at the stage. The slipped distance of one slip system at the surface was not uniform. and formation of the extrusions or intrusions was assumed to occur such place. By comparing the morphological change caused by crystallographic orientation, strain amplitude, number of cycles or stacking fault energy, some interesting results which help to clarify the basic mechanism of fatigue damage were obtained. Furthermore, applicability of the scanning tunneling microscopy to fatigue damage is discussed.