• Structural Engineering and Mechanics
• /
• v.42 no.2
• /
• pp.229-245
• /
• 2012

Bridge vibration displacements have been directly measured by LVDTs (Linear Variable Differential Transformers) or laser equipment and have also been indirectly estimated by an algorithm of integrating measured acceleration. However, LVDT measurement cannot be applied for a bridge crossing over a river or channel and the laser technique cannot be applied when the weather condition is poor. Also, double integration of accelerations may cause serious numerical deviation if the initial condition or a regression process is not carefully controlled. This paper presents an algorithm of estimating bridge vibration displacements using vibration strains measured by FBG (Fiber Bragg Grating) sensors and theoretical mode shapes of a simply supported beam. Since theoretically defined mode shapes are applied, even high modes can be used regardless of the quality of the measured data. In the proposed algorithm, the number of theoretical modes is limited by the number of sensors used for a field test to prevent a mathematical rank deficiency from occurring in computing vibration displacements.89The proposed algorithm has been applied to various types of bridges and its efficacy has been verified. The closeness of the estimated vibration displacements to measured ones has been evaluated by computing the correlation coefficient and by comparing FRFs (Frequency Response Functions) and the maximum displacements.

• Korean journal of applied entomology
• /
• v.34 no.1
• /
• pp.20-32
• /
• 1995

Adult diapause in insects is characterized by suppression of reproductive development. It is induced by environmental cues such as photoperiod, temperature, food availability, and other conditions Diapause-inducing environment is recognized and analyzed by the brain of the insects. The interpreted information is conveyed via endocrine system to target tissues such as ovaries, fat body, and other tissues. From this signal hierarchy of a brain-endocrine-target tissue axis, several factors are involved to express a diapause trait in a quantitative mode, even though the insects show a binomial phenotye between being in diapause or not. Recent works estimated that the number of the factors is relatively small by a series of crossing trials between high and low diapause lines. Heritability of the diapause is quite high (ca. 70%) in some species. Epistasis, sex-linkage, pleiotropism, and other nongenetic components also affect diapause inheritance. Most physiological studies have been focused on control mechanisms of the juvenile hormone (JH) synthesis in corpora allata (CA) because JH level in hemolymph of teneral adults is critical to decide a later developmental mode. Allatostatin, an antagonizer of JH synthesis, has been believed to be a potent brain message to CA for adult diapause induction.

• Korean Journal of Heritage: History & Science
• /
• v.33
• /
• pp.308-336
• /
• 2000

Bridge - Treading was a flok festival that was held on the night of the 1st full moon of the lunar new years. Men and women, both young and old, took pan in it in the belief that crossing a bridge, or bridges, back and forth, the same number of times as the number of years they were old, on this night would prevent all types of leg and foot ailments from occurring throughout the coming year. The practice was carried on mainly around the Seoul central region of Korea. Though it has now largely disappeared, it has been reatores in the Yeoju area. According to the Korean almanac and other chronicles, it was once practiced throughout the land. It is in the preserved was brige-treading festival of yeoju, however, that both the original form, transmission, and function are clarified and brought to light. In this regard, when compares to similar festivals of other region such as Songpa and Kwacheon, it is found that of Yeojo has a special characteristic. Accompanied by folksongs, music, and dance, this was not a religions festival in the strict sense, but rather an annual custom filled with mirth and merriment that formed an integral part of Korean folk culture.

• Journal of the Korean Society of Safety
• /
• v.29 no.5
• /
• pp.154-159
• /
• 2014

This study deals with the pedestrian accidents of intersections in case of Cheongju. The objective is to develop the pedestrian accident models using Tobit regression model. In pursuing the above, the pedestrian accident data from 2007 to 2011 were collected from TAAS data set of Road Traffic Authority. To analyze the accident, Poisson, negative binomial and Tobit regression models were utilized in this study. The dependent variable were the number of accident by intersection. Independent variables are traffic volume, intersection geometric structure and the transportation facility. The main results were as follows. First, Tobit model was judged to be more appropriate model than other models. Also, these models were analyzed to be statistically significant. Second, such the main variables related to accidents as traffic volume, pedestrian volume, number of traffic island, crossing length and the pedestrian countdown signal systems were adopted in the above model.

• KIEAE Journal
• /
• v.12 no.2
• /
• pp.117-124
• /
• 2012

The purpose of this study is to investigate the change of wind environment for different building arrangement. In this study, we analyze outdoor wind environment on different building arrangement that take same floor area ratio using the CFD (Computational Fluid Dynamics) method. We do not consider the effect of temperature. Building arrangements of low density, different hight and a lot of green area will change the effect of wind environment. The eight different arrangements of buildings are studied in this paper. In these calculations, we know the different arrangement of buildings change outdoor wind environments. Especially, reducing the number of building and crossing the different height of buildings have a good kind of wind environment at the same floor ratio. We know that these arrangement of buildings to reduce the heat island phenomena on city plan.

• Geomechanics and Engineering
• /
• v.11 no.1
• /
• pp.41-58
• /
• 2016

This paper focuses on the deformation behavior of tunnels crossing a weak zone in conventional tunneling. A three-dimensional finite element model was adopted that allows realistic modeling of the tunnel excavation and the support installation. Using the 3D FE model, a parametric study was conducted on a number of tunneling cases with emphasis on the spatial characteristics of the weak zone such as the strike and dip angle, and on the initial stress state. The results of the analyses were thoroughly examined so that the three-dimensional tunnel displacements at the tunnel crown and the sidewalls can be related to the spatial characteristic of the weak zone as well as the initial stress state. The results indicate that the effectiveness of the absolute displacement monitoring data as early warning indicators depends strongly on the spatial characteristics of the weak zone. It is also shown that proper interpretation of the absolute monitoring data can provide not only early warning for a weak zone outside the excavation area but also information on the orientation and the extent of the weak zone. Practical implications of the findings are discussed.

• Journal of Korean Society of Transportation
• /
• v.1 no.1
• /
• pp.10-27
• /
• 1983

In order to improve the traffic enviroments in the urban streets of Seoul, the computer controlled traffic signal system was installed on 45 intersections at 1980. Afterward, yearly expansion was done to the numbers of 132 intersections and 232 loop detectors. The problems of timing plans were discussed, mainly pedestrian crossing timing as well as the generations of split and offset. The broad urban streets more than 30m require long phasing time of pedestrians, even though the equivalent or correspondent traffic volume is rare. The configuration of computer system for traffic control was disscussed in terms of control strategy. An overview also given. The improvements were measured at every quater. The travel speed improved to 42%, delay time reduced to 41% and number of stops to 43% respectively.

• Journal of Magnetics
• /
• v.17 no.4
• /
• pp.298-301
• /
• 2012

In order to know the effect of surface irregularity in the detection of local wall thinning of pipeline using pulsed eddy current (PEC), the lift-off effects on PEC signal have been investigated. Three kinds of parameters in the PEC signal, which is "peak amplitude", "time to peak amplitude" and "time to zero crossing" are analyzed to separate the lift-off effects in the PEC signal. The distance from sensor to the bottom of sample which is the total thickness of combined insulator and sample is kept constant. The magnitude of the differential peak amplitude is increased with increasing sample thickness, the time to peak amplitude is increased with increasing the sample thickness. To determine the effect of lift-off, a number of balanced transient responses combining wall thinning locations and lift-off distances were plotted.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.177-184
• /
• 2002

The concrete median barriers are the most popular safety appurtenances that can be installed on narrow medians and are effective in keeping uncontrolled vehicles from crossing into opposing lanes of traffic. It is necessary to install and maintain median barriers because it is very difficult to reserve enough room required for medians in KOREA. And concrete median barriers are accepted as the actual alternatives for median barriers, mostly because they require almost no maintenance even after serious collisions. Typical concrete median barriers are 810mm high and have 596mm high glare screens on top of them. But we have experienced a number of “climb” and “roll-over” accidents of heavy vehicles until now, and most of all, there have been some serious accidents caused by the part of broken glare screens. We have performed many computer simulations for the evaluation of the crashworthiness of concrete median barriers, and through the simulations we have tried to find a proper type of concrete median barrier.

• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.35-46
• /
• 1989

Experiments described in which cotton fabrics at different stages of chemical processing were abraded to different extents on a Stoll Abrasion Tester with three different abradants, namely, a worsted fabric, flax fabric and silicon carbide paper. The four different plain-weave cotton fabrics selected were 1) desized, 2) scoured and bleached, 3) mercerized, 4) resin-treated. The surface abrasive damages of treated fabrics were observed by SAM, and load-elongation percent retentions of abraded samples were measured by Instrong Tester. The result were as follows: 1. The maximum percent retention of load-elongation with three different abradants was exhibited by the scoured and bleached fabrics and the minimum by the resin finished fabric. 2. The electron micrographs of four different cotton fabrics abraded by flax, worsted fabric abradants for 900 rubs showed a large number of criss-crossing stray fibers in fabric structure. It may be the molecular adhesion for frictional resistance to be explained. 3. The electron micrographs of four different cotton fabrics abraded by silicone carbide abradants showed the form of busing or mashing fibers in fabric structure. The above might be on the basis of the ploughing theory.