• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.613-619
• /
• 2000

This paper presents a mettled to reduce the number of conductors of catenary system for estimating line constants. Conductors of a catenary system are grouped and reduced. For example, the model representing the contact and the messenger conductors with a single equivalent conductor is. probably more realistic than assuming the two conductors completely separated, since they are generally connected by droppers every few meters. Therefore, this paper shows the method to reduce the number of conductors using electric circuit theory. To verify the results, we compared the equivalent line constants obtained by proposed method with those obtained by measurement.

• 산업경영시스템학회지
• /
• 제30권3호
• /
• pp.94-102
• /
• 2007

In this paper, we consider a line balancing problem in hybrid flowshops where each workstation has identical parallel machines. The number of machines in each workstation is determined in ways of satisfying pre-specified throughput rate of the system. To minimize the total number of machines in the systems, we propose five heuristic methods and one simulated annealing method. Extensive computational experiments found the superiorities of two heuristic methods and the meta-heuristic.

• 한국정보처리학회논문지
• /
• 제3권1호
• /
• pp.43-54
• /
• 1996

이 논문은 새로운 휴리스틱 탐색(heuristic search)방법을 이용하여, 수평 및 수 직선으로 이루어진 방해 물들이 놓인 가운데 수평 및 수직선으로 구성된 최단 거리 (rectilinear shortestpath)와 꺾이는회수가 가장 적은최소 꺾임경로(link metric shortest path) 및 이 둘을 혼합시킨 혼합형 최단 경로를 구하는 알고리즘을 서술 하고 있다. 최단 경로를 구하는 방법으로 미로 찾기형 알고리즘(maze-running algorithms)과 선형 탐색 알고리즘(line-search algorithms)의 장점만을 이용한 GMD 알고리즘(Guided Minimum Detour algorithm)을 제안하고 있으며 이를 더욱 효율 적으 로 개선한 LGMD 알고리즘 (Line-by-Line Guided Minimum Detour algorithmm)을 개발 하였다. 이들 GMD와 LGMD 알고리즘은 기존의 최단 경로를 내포하고 있는 conection group를 이용하지 않고서도 휴리스틱을 사용한 guided A 탐색(guided A* search)을 이용하여 최적의 최단 경로를 구할 수 있는 장점이 있으며 시간과 메모리 면에서 효 율을 극대화하였다. 이들 GMD와 LGMD 알고리즘은 각각 O(m＋eloge＋NlogN)와 O(eloge＋ NlogN)의 시간과 O(e＋N)의 메모리를 사용한다. 여기서 m은 탐색에 사용된 지선 (line segment)들의 수이다. 또한 LGMD는 최소 꺾임 경로(link metric shortest path)와 최단 경로와 최소의 꺾임을 조합한 혼합형 최단 경로를 구하는 데에도 적용될 수 있는 확장성을 가지고 있다.

• 한국통신학회논문지
• /
• 제19권5호
• /
• pp.883-891
• /
• 1994

본 논문에서는 화소에서의 방향성을 이용하여 필기체 한글 인식에 유용한 세선화 알고리듬을 제안하였다. 세선화하기 전에 방향성 검출을 시행한다. 검출된 방향성에 의해서 직선과 사선으로 분류한다. 직선성분에는 Rutovitz crossing number를 이용한 알고리듬을 적용한다. 사선성분에는 Hilditch crossing number를 이용한 알고리듬을 적용한다. 제안한 알고리듬을 이미 제안된 다른 6가지의 세선화 알고리듬을 적용한 세선화 영상들과 성능을 비교하였다. 비교 항목으로는 기준 골격선과의 유사도, 잔가지 수, 그리고 자소 분리율 등이 사용되었다. 실험은 570개 문자에 대해서 수행하였다. 실험 결과 제안한 알고리듬은 유사도와 필기체 한글 인식에 많이 사용되는 자소 분리율에서 6개 비교 대상 중에서 가장 우수한 결과를 보였다.

• 설비공학논문집
• /
• 제17권6호
• /
• pp.529-535
• /
• 2005

This study experimentally examines the air-side performance of spiral finned tube heat exchangers. The effects of fin spacing, fin height, and tube alignment were investigated. Reduction of fin spacing decreased the Colburn j factor. However, the effect of fin height on the Colburn j factor was negligible. An increase of tube row decreased the Nusselt number for both staggered and in-line tube alignments. However, the decrease of the Nusselt number for the in-line tube alignment was much more significant than that of the staggered tube alignment. The average Nusselt number of the staggered tube alignment was larger than that of the in-line tube alignment by $10\%$ when the Reynolds number ranged from 300 to 1700. An empirical correlation of the Nusselt number was developed by using geometric parameters of heat exchanger and correction factors. The correction factor considered the effects of tube alignment and number of tube rows on the heat transfer. The proposed correlation yielded a mean deviation of $4\%$ from the present data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2538-2541
• /
• 2005

This paper deals one of the methods of system identification, especially on-line system identification in time-domain. The algorithm in this study needs all states of the system as well input to it for system identification. In this reason, Kalman filter is used for state estimation. But in order to implement a state estimator, the fact that a system model must be known is logical contradiction. To overcome this, state estimation and system parameter estimation are performed simultaneously in one sample. And the result of the system parameter estimation is used as basis to state estimation in next sample. On-line system identification comes, in every sample by performing both processes of state estimation and parameter estimation that are related mutually and recursively. This paper demonstrates the validity of proposed algorithm through an example of an unstable inverted pendulum system. This algorithm can be useful for on-line system identification of a system that has fewer number of measurable output than system order or number of states.

• 산업공학
• /
• 제16권spc호
• /
• pp.111-115
• /
• 2003

Railroad system is consisted of resources of rail track, signal system, and vehicles. Railway operation must use these limited resources and maximize resource utilization. Line capacity(number of trains throughput/day) is determined by such as parameters, line utilization rate($\alpha$), dummy rate for the break-through hour($\beta$), and dummy rate for the number of rail track intervals($\delta$). Line capacity simulation(LCS) determined the line capacity through simulation given $\alpha$, $\beta$, and $\delta$. This paper deals with the development of parameter evaluation simulation(PES). PES presents the decision maker with the relationship of line capacity and measurement of robustness for various scenarios in different parameters and then the decision maker can determine the appropriate parameters.

• 한국철도학회논문집
• /
• 제19권4호
• /
• pp.555-563
• /
• 2016

선로용량은 수요에 부합되는 최대열차횟수를 결정하고 수송력 증대에 필요한 투자우선순위 판단을 위한 중요한 척도이다. 특히 2016년 중반부터 고속철도노선에 두 철도운영자가 운송사업을 개시함에 따라 선로용량과 실제배정 가능한 최대열차횟수 간에 상충이 발생하지 않고 유효운송경쟁이 보증될 수 있도록 선로용량을 산정 관리할 필요성이 있다. 열차종별 운행횟수, 도중정차패턴과 착발시각, 운행시간, 열차의 대피 또는 교행, 열차간의 안전시격 등에 따라 선로용량이 크게 달라지므로 현재까지도 실제 적용에 많은 논쟁이 있는 것도 사실이다. 이러한 문제점을 극복하고자 철도운영자의 운송정책을 고려한 열차운행 스케쥴을 반영할 수 있는 시뮬레이션 기법에 의한 선로용량 산정방법을 제시하고자 한다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권5호
• /
• pp.507-513
• /
• 2000

Objective : The purpose of this study is to evaluate the vitality of the teeth in and adjacent to the mandibular fracture line according to variable conditions of fracture and to establish the protocol of treatment of fracture line teeth. Materials and Methods : The vitality of 97 teeth in fracture line and 104 teeth adjacent to fracture line of 52 patients were invested preoperatively. Of these, 66 teeth in fracture line and 72 teeth adjacent to fracture line were monitored at least 6 months after operation. An electric pulp tester was used to measure pulpal response. The relationships between the vitality of teeth in variable time(preoperation, immediate post-operation; within 1 week after operation, and 6 months after operation) and variable conditions of fracture(horizontal, vertical gap of fracture line, the number of fracture line)were evaluated statistically. Result : The vitality of fracture line teeth in the 6 months after operation statistically differed by the vertical gap of fracture line and the number of fracture line. The vitality of fracture line adjacent teeth in the immediate post-operation only statistically differed by the vertical gap of fracture line. There were statistically differences between preoperative EPT value and vitality of fracture line teeth on 6 months after operation. There were 5 cases of complications including periapical and periodontal abscess. Of these, only one tooth was extracted and the others were well treated with endodontic treatment and subgingival curettage. Conclusion : It is recommended to retain teeth and to monitor the vitality of teeth in and adjacent to fracture line, unless there is an absolute indication for extraction.

• 한국멀티미디어학회논문지
• /
• 제20권2호
• /
• pp.225-233
• /
• 2017

Line-laser beams are used for accurate measurement of 3D shape, which is robust to external illumination. For depth measurement, we project a line-laser beam across an object from the face and take an image of the beam on the object surface using a CCD camera at some angle with respect to the face. For shape measurement, we project parallel line-laser beams with narrow line to line distance. When a layer of thin materials attached to a cylinder is long narrow along its circumference, we can measure the shape of the layer with a small number of parallel line beams if we project line beams along the circumference of the cylinder. Measurement of the depth of the attached materials on a line-laser beam is based on the number of pixels between an imaginary line along the imaginary cylinder without the attached materials and the beam line along the materials attached to the cylinder. For this we need to localize the imaginary line in the captured image. In this paper, we model the shape of the line as an ellipse and localize the line with least square estimate. The proposed method results in smaller error (maximum 0.24mm) than a popular 3D depth camera (maximum 1mm).