• 제목/요약/키워드: normal operation state

검색결과 172건 처리시간 0.027초

Consistent thermal analysis procedure of LNG storage tank

  • Jeon, Se-Jin;Jin, Byeong-Moo;Kim, Young-Jin;Chung, Chul-Hun
    • Structural Engineering and Mechanics
    • /
    • 제25권4호
    • /
    • pp.445-466
    • /
    • 2007
  • As the LNG (Liquefied Natural Gas) tank contains cryogenic liquid, realistic thermal analyses are of a primary importance for a successful design. The structural details of the LNG tank are so complicated that some strategies are necessary to reasonably predict its temperature distribution. The proposed heat transfer model can consider the beneficial effects of insulation layers and a suspended deck on temperature distribution of the outer concrete tank against cryogenic conditions simply by the boundary conditions of the outer tank model. To this aim, the equilibrium condition or heat balance in a steady state is utilized in a various way, and some aspects of heat transfer via conduction, convection and radiation are implemented as necessary. Overall thermal analysis procedures for the LNG tank are revisited to examine some unjustifiable assumptions of conventional analyses. Concrete and insulation properties under cryogenic condition and a reasonable conversion procedure of the temperature-induced nonlinear stress into the section forces are discussed. Numerical examples are presented to verify the proposed schemes in predicting the actual temperature and stress distributions of the tank as affected by the cryogenic LNG for the cases of normal operation and leakage from the inner steel tank. It is expected that the proposed schemes enable a designer to readily detect the effects of insulation layers and a suspended deck and, therefore, can be employed as a useful and consistent tool to evaluate the thermal effect in a design stage of an LNG tank as well as in a detailed analysis.

제어용 계전기의 원격감시시스템 구현 (An Implementation of Remote Monitoring System for Control Relay)

  • 장용훈;남재현
    • 한국정보통신학회논문지
    • /
    • 제20권11호
    • /
    • pp.2100-2106
    • /
    • 2016
  • 자동화시스템은 PLC를 사용하여 생산제품의 제조 공정상태를 감시하고 센서에서 전달되는 센서정보를 처리한다. 본 연구에서는 자동화시스템에 사용되고 있는 제어용 계전기의 상태를 감시하는 원격감시시스템을 제안한다. 제안한 시스템은 제어 릴레이모듈, 원칩프로세서 모듈, 컴퓨터 모니터링시스템과 제어용 계전기의 내역을 입력하고 관리하는 데이터베이스시스템으로 구성한다. 컴퓨터 모니터링시스템은 제어용 계전기의 작동상태와 수명을 모터링할 수 있도록 구성하였고, 데이터베이스는 제어용 계전기의 투입 일자를 입력하고 수정이 가능하게 구성하였으며, 제어용 계전기의 작동상태의 정보를 자동으로 프린트할 수 있도록 구성하였다. 원격감시시스템에서 제어용 계전기의 고장상태를 실시간으로 파악하고, 고장부품을 신속하게 교체하여 정상가동에 소요되는 시간을 최소화할 수 있도록 하였다.

하이브리드 차량 네트워크를 위한 연결성 분석기의 설계 및 구현 (Design and implementation of a connectivity analyzer for the hybrid vehicular network)

  • 이정훈;김철민;권상철
    • 한국공간정보시스템학회 논문지
    • /
    • 제10권3호
    • /
    • pp.45-54
    • /
    • 2008
  • 텔레매틱스 네트워크 구성을 위한 유용한 가이드라인과 정보를 제공하기 위하여 본 논문은 현재 운영되고 있는 택시 텔레매틱스 시스템으로부터 수집된 실제 이동이력 데이터를 바탕으로 하이브리드 텔레매틱스 네트워크에 있어서의 연결성 분석기를 설계하고 구현한다. 본 설계에 따라 구현된 분석기는 다양한 인자들을 고려한 시뮬레이션에 의해 1) 각각의 차량의 위치를 추적하고, 2) 차량의 타입, 즉, 게이트웨이 또는 일반 노드인지를 설정하며, 3) 특정시간에 한 노드가 모바일 게이트웨이에 연결 될 수 있는지 판단하고 4) 차량의 상태추적에 의해 연결의 단절 시간을 계산한다. 무선 전송거리와 게이트웨이 비율 등의 성능인자를 고려한 이 분석을 통해, 셀룰러 네트워크와 애드혹 네트워크가 결합된 하이브리드 네트워크에서 각 노드의 연결성과 연결 단절시간에 대한 사전분석을 시행할 수 있으며 이에 의해 효율적인 모바일 게이트웨이의 밀도와 버퍼 공간의 양을 결정할 수 있다.

  • PDF

태양광 발전 부스트 컨버터를 이용한 인버터 PCS 특성 (Characteristic PCS of Inverter by Boost Converter of PV Generation)

  • 황락훈;나승권;오상학
    • 한국항행학회논문지
    • /
    • 제22권6호
    • /
    • pp.654-664
    • /
    • 2018
  • 본 논문은 전압형인버터를 교류전원과 동기 시켜서 운전하고 정상상태에서는 전원으로부터 운전하고 정상상태에서는 전원에서 직류 측에 연결된 축전지를 태양전지를 이용한 광기전력효과와 함께 PCS (power conditioner system)의 동작으로 일정전압을 충전하게 되며, 전원의 차단, 전원의 전압변동 및 부하전류의 변화에도 일정한 전압을 유지하도록 하였다. 태양광 발전시스템을 승압쵸퍼와 단상 PWM (pulse width modulation) 전압형인버터를 사용하여 전원차단 경우나 전압변동 및 부하변동에 의한 출력전류 변화에도 일정한 출력전압을 유지하고 EESS (electric energy storage system)를 상시 운영하여 약 10~20% 전력절감효과를 얻을 수 있는 에너지절약 전원복합형 전력변환장치로 구성되어 있다. 출력은 PWM방식에 의하여 양호한 파형이 되도록 하고 전원차단과 부하의상태의 변화 및 전원 전압 변동에도 일정한 전압으로 출력됨을 실험을 통하여 확인 할수 있었다.

500MW급 표준화력발전소 시뮬레이터 모델을 이용한 디지털 제어시스템 검증 (Digital Control System Validation using the Simulator Models for 500MW Standard Type Fossil Power Plant)

  • 서정관;이명수;홍진혁
    • 한국시뮬레이션학회논문지
    • /
    • 제19권3호
    • /
    • pp.71-79
    • /
    • 2010
  • 디지털 계측제어계통을 발전소에 적용하기 전에 시험 및 검증하기 위하여 500MW급 표준화력발전소 시뮬레이터 모델을 개발하고 터빈 제어시스템과 연계하였다. 선택된 디지털 계측제어계통의 성능시험 시, 해당되는 시뮬레이터 모델은 조정할 수 없는 발전소 디지털 계측제어계통과 교체된다. 시뮬레이터 모델 및 제어시스템의 입출력은 연계장치에 있는 LabView 프로그램을 사용하여 연결되었다. 본 논문에서는 시뮬레이터 모델 및 디지털 계측제어계통을 연계하는 방법론에 대하여 기술하고, 정상운전, 과도상태 및 고장인가 시 수행된 검증시험 결과를 제시하였다. 시뮬레이터 모델을 사용한 디지털 계측제어계통의 종합검증을 통하여 시뮬레이터가 디지털 제어시스템을 발전소에 적용하기 위한 시험장치로 사용될 수 있는 방법론을 개발하였다.

머신러닝을 활용한 세라믹 정밀여과 파일럿 플랜트의 파울링 조기 경보 방법 (An early fouling alarm method for a ceramic microfiltration pilot plant using machine learning)

  • 탁도현;김동건;전종민;김수한
    • 상하수도학회지
    • /
    • 제37권5호
    • /
    • pp.271-279
    • /
    • 2023
  • Fouling is an inevitable problem in membrane water treatment plant. It can be measured by trans-membrane pressure (TMP) in the constant flux operation, and chemical cleaning is carried out when TMP reaches a critical value. An early fouilng alarm is defined as warning the critical TMP value appearance in advance. The alarming method was developed using one of machine learning algorithms, decision tree, and applied to a ceramic microfiltration (MF) pilot plant. First, the decision tree model that classifies the normal/abnormal state of the filtration cycle of the ceramic MF pilot plant was developed and it was then used to make the early fouling alarm method. The accuracy of the classification model was up to 96.2% and the time for the early warning was when abnormal cycles occurred three times in a row. The early fouling alram can expect reaching a limit TMP in advance (e.g., 15-174 hours). By adopting TMP increasing rate and backwash efficiency as machine learning variables, the model accuracy and the reliability of the early fouling alarm method were increased, respectively.

뇌파검사 자료를 기반으로 한 과학영재 판별 지수(G-Index) 개발과 적용 (New index for the gifted students(G-Index) with EEG analysis)

  • 김경화;김규한;이선길;허명;김용진
    • 영재교육연구
    • /
    • 제15권1호
    • /
    • pp.67-84
    • /
    • 2005
  • 과학영재 판별의 대안적 도구로서의 가능성을 찾아보기 위하여 영재 집단과 일반 집단의 뇌파검사를 실시하였다. 뇌파의 주성분 공간분석법인 PCA분석 자료의 집단별 차이점을 이용하여 과학영재 판별지수(Gifted Index: G-Index)를 개발하고 과학영재 판별의 가능성을 탐색하여 보았더니 76% 수준에서의 판별 효과를 얻을 수 있었다. 또 과학영재 판별이 가능한 기타 판별도구 성취도들 간의 상관관계를 바탕으로 하여 회귀분석을 시도한 결과는로 나타났다. 이를 근거로 한 영재 판별 확률식을 제안하면 $$P=\frac 1{1+e^{-[-0.018(TTCT)+0.057(IQ)+1.916(FASP)+0.682(V.T)+0.088(Exp.)+0.034(G-Index)-57.510]}}$$와 같고 이 회귀분석식을 적용한 결과 영재 집단 내에서의 판별 가능성이 95% 수준에서 매우 우수하였다. 따라서 과학영재 판별의 대안적 도구로서의 뇌파검사와 G-Index의 유용성을 확인할 수 있었다.

고속 Toggle 2.0 낸드 플래시 인터페이스에서 동적 전압 변동성을 고려한 설계 방법 (Adaptive Design Techniques for High-speed Toggle 2.0 NAND Flash Interface Considering Dynamic Internal Voltage Fluctuations)

  • 이현주;한태희
    • 전자공학회논문지
    • /
    • 제49권9호
    • /
    • pp.251-258
    • /
    • 2012
  • SSD (Solid-state Drive), 더 나아가 SSS (Solid-state Storage System)와 같은 고성능 스토리지 요구 사항을 지원하기 위해 최근 낸드 플래시 메모리도 DRAM에서와 같이 SDR (Single Data Rate)에서 고속 DDR (Double Data Rate) 신호구조로 진화하고 있다. 이에 따라 PHY (Physical layer) 회로 기술을 적용하여 협소 타이밍 윈도우 내에서 유효 데이터를 안정적으로 래치하고, 핀 간 데이터 스큐를 최소화하는 것 등이 새로운 이슈로 부각되고 있다. 또한, 낸드 플래시 동작 속도의 증가는 낸드 플래시 컨트롤러의 동작 주파수 상승으로 이어지고 동작 모드에 따라 컨트롤러 내부 소모 전력 변동성이 급격히 증가한다. 공정 미세화와 저전력 요구에 의해 컨트롤러 내부 동작 전압이 1.5V 이하로 낮아지면서 낸드 플래시 컨트롤러 내부 전압 변화 마진폭도 좁아지므로 이러한 소모 전력 변동성 증가는 내부 회로의 정상 동작 범위를 제한한다. 컨트롤러의 전원전압 변동성은 미세공정으로 인한 OCV (On Chip Variation)의 영향이 증가함에 따라 더 심화되는 추세이고, 이러한 변동성의 증가는 순간적으로 컨트롤러의 보장된 정상 동작 범위를 벗어나게 되어 내부 로직의 오류를 초래한다. 이런 불량은 기능적 오류에 의한 것이 아니므로 문제의 원인 규명 및 해결이 매우 어렵게 된다. 본 논문에서는 낸드플래시 컨트롤러 내부의 비정상적 전원 전압 변동하에서도 유효 타이밍 윈도우를 경제적인 방법으로 유지할 수 있는 회로 구조를 제안하였다. 실험 결과 기존 PHY회로 대비 면적은 20% 감소한 반면 최대 데이터 스큐를 379% 감소시켜 동등한 효과를 보였다.

50,000 DWT 유조선의 밸러스트 흘수에서 우현 전타시 과도상태가 프로펠러축 거동에 미치는 영향 연구 (Effect of Transient Condition on Propeller Shaft Movement during Starboard Turning under Ballast Draught Condition for the 50,000 DWT Oil Tanker)

  • 이재웅
    • 해양환경안전학회지
    • /
    • 제26권4호
    • /
    • pp.412-418
    • /
    • 2020
  • 선박 축계를 구성하는 프로펠러축은 엔진출력, 프로펠러 하중 및 편심추력의 영향으로 인해 거동의 양상이 달라져 선미관 후부베어링의 국부하중 변화를 일으킴으로써 선미관 베어링 손상의 위험을 증가시킨다. 이를 방지하기 위해 수행된 추진축계 정렬연구는 선급강선규칙을 중심으로 주로 축과 지지베어링간의 상대적 경사각과 유막유지를 최적화 하는데 중점을 두어 진행 되어왔다. 그러나 보다 상세한 평가를 통한 추진축계의 안정성 확보를 위해서는 전타와 같은 급격한 선미유동장 변화에 기인한 과도상태를 포함한 동적상태의 고려가 필요하다. 이러한 관점에서, 본 연구는 50,000 DWT 선박을 대상으로 스트레인 게이지법을 이용하여 밸러스트 흘수 상태에서 정격회전수로 운전 중 대표적 동적 과도상태인 우현 전타상태에서의 프로펠러 축 거동이 추진축계에 미치는 영향을 분석하였다. 그 결과 변동된 프로펠러 편심추력은 프로펠러축을 일시적으로 강하게 내려 누르는 힘으로 작용하여 선미관 베어링의 국부하중을 증가시켜 축계 안정성에 부정적 영향을 미침을 증명하였다.

종합병원의 비보험환자 처치행위 양상과 수가분석에 관한 연구 (An Analysis of Nursing Behavior and Unit of Treatment Cost of Non- Insurance Patients)

  • 오세영
    • 대한간호학회지
    • /
    • 제10권1호
    • /
    • pp.41-55
    • /
    • 1980
  • The medical care insurance system, being put into practice nearly for three years, seem to have brought about some considerable problems as serious for the government as to consider a revision of that system. As one of the most serious problems of present system, the treatment cost of insurance patients is so remarkably low in comparison with than of non-insurance cases that normal operation of hospitals is threatened and care services of low quality are induced. The researcher carried out this survey to analyze and bring to light several aspects of treatment cost of non-insurance patients as a material for a re-assessment of the cost of insurance cases which shows a a considerable difference in amount at the standpoint of hospitals with than of non-insurance cases and further, hoping the significant blind spot of present insurance system(that is, the absence of regulations' for cost assessment by patterns or types of health care treatment) will be mended in near future. The survey was carried out with the treatment invoice sheets of total 902 in-hospital Patients of a general hospital in Seoul during the period of the 2 nd quarter of the year(1979). Among total 902 patients, 694 cases were used for analysis, because those disease or syndromes shared by less than 10% of the patients were put aside before procession. The data were analyzed by kinds or types of diseases, demographic characteristics of patients, hospitalization patterns, types of nursing treatment, etc. The result of analysis was as follows 1. Among all the non-insurance cases, those who received one or more kinds of nursing treatment mounted up to 96. 7 %. The invoice issue frequency per person was 7.2 times, while that frequency per day for a person was 0.8, : the treatment cosr per person was ₩22,650 while its daily average was ₩2,430, due to the average 9.3 in-hospital days per person. 2. As to the nursing treatment types by the demographic characteristics of patients and hospitalization patterns. a. The unit cost female patients was generally more expensive them that of males, and independent nursing service was more given than other types of treatment. As to age, higher age groups received independent nursing service most, while the youngest group received instrumental and integrated nursing services. b. As to room grade, the unit cost of I.C.U. cases was the highest : and the cast of private room patients was higher than that of public room patients. By in-hospital days, the curve of function showed L. type : that is, the longer stay, the lower function. 3. State of treatment types by kinds of disease were ; a. Dependent nursing service showed comparatively high availability in surgical and neurologic disease and independent nursing service was most received by medical, obstetrical and urological patients, while instrumental and integrated services were most available for respiratory disease and obstetrical and neurologic diseases next. b. The invoice issue frequency per day for a patient was highest in obstetrical disease 3.8 times, and the unit cost(per one invoice sheet) was also highest in obstertrical disease(₩10,880) and next in neurologic cases(₩ 4,690 ). 4. As to the pertained departments. a. Cost amount per person was highest in department of Psychiatries daily cost was highest in obstetrical cases : while the invoice issue frequency was highest in obstetrics and next in pediatrics. b. In departments in need of surgical operation, dependent nursing care was highly availabl : while in internal medicine and obstetrics, independent service was higher. Psychiatrics showed the highest the of integrate nursing while pediatrics and obstetrics higher of instrumental services. The variation co-efficien of treatment cost came out to be relatively in high in special surgery, opthalmology and internal medicine. 5. State of treatment cost by types of nursing behavior was. a. The average frequency of invoice issue was 3.5 (times). Among the type four types of treatment, instrumetal service (4.3) and independent nursing behavior(3.9) showed higher frequency than average respectively. But as to unit cost (per invoice). dependent (₩5,200) and integrated (₩5,340) nursing care services were higher than average and considerably higher than the other two types. b. In repect patient distribution. independent nursing behavior(80.3% ) was the highest and depend ent nursing (31.7% ) the lowest. The variation co-efficient of treatment cost appeared highest in dependent nursing be havior as a whole, and among that, doctor's diagnosis showed the highest coefficient value (100.7). In conclusion, the variaty of treatment cost(treatment itself ) by various characteristics and treatment types pro- that treatment various sort of patients and treatment cost of various types of nursing behavior cannot be uniform. Therefore, to attain the equalization of health care service and its cost both for insurant and non-insurant patients, a more specific provision for assessment of cost should be added to the present medical care insurance system and, in addition, the cost of nursing treatment is desired to be inserted into the treatment invoice.

  • PDF