Consistent thermal analysis procedure of LNG storage tank |
Jeon, Se-Jin
(DAEWOO E&C, Institute of Construction Technology)
Jin, Byeong-Moo (DAEWOO E&C, Institute of Construction Technology) Kim, Young-Jin (DAEWOO E&C, Institute of Construction Technology) Chung, Chul-Hun (Department of Civil and Environmental Engineering, Dankook University) |
1 | ACI Committee 349 (2001), Commentary on Code Requirements for Nuclear Safety Related Concrete Structures (ACI 349R-01), American Concrete Institute, Mich |
2 | ANSYS - User's Manual. Ver. 8.0 (2004), ANSYS, Inc |
3 | Association of German Engineers (VDI) and VDI Society for Chemical and Process Engineering (1993), VDI Heat Atlas, VDI- Verlag GmbH, Dusseldorf, Germany |
4 | Bangash, M.Y.H. (1989), Concrete and Concrete Structures: Numerical Modelling and Application, Elsevier Applied Science, NY |
5 | Chen, Q.S., Wegrzyn, J. and Prasad, V (2004), 'Analysis of temperature and pressure changes in liquefied natural gas (LNG) cryogenic tanks', Cryogenics, 44(10), 701-709 DOI ScienceOn |
6 | Choi, C.K., Lee, T.Y. and Lee, E.J. (2002), 'Improved finite element models for the in-ground LNG storage tank', J. the Korean Society of Civil Engineers, 22(5-A), 1175-1182 |
7 | DAELIM Industrial Co., Ltd. and DYWIDAG (1995), Inchon LNG-receiving Terminal (lst Extension) |
8 | DAEWOO Corp., DAELIM Industrial Co., Ltd. and OBAYASHI Corp. (1999), Tongyoung LNG Terminal Project |
9 | Ghali, A. and Elliott, E. (1992), 'Serviceability of circular prestressed concrete tanks', ACI Struct. J., 89(3), 345-355 |
10 | Ghali, A. and Favre, R. (1994), Concrete Structures: Stresses and Deformations, 2nd ed., E & FN Spon, London |
11 | Goto, Y. and Miura, T. (1979), 'Experimental studies on properties of concrete cooled to about minus 160°C', Technology Reports (Tohoku Univ.), 44(2), 357-385 |
12 | Ivanyi, G. (1987), 'Local and global cryogenic attacks', Proc. of the 1st Int. Corf. on Concrete for Hazard Protection |
13 | Japan Gas Association (1979), Recommended Practice for LNG Inground Storage (RPIS) |
14 | Jeon, S.J. (2004), 'Consistent assessment for liquid tightness of LNG storage tank subjected to cryogenic temperature-induced forces', J. the Korean Society of Civil Engineers, 24( I-A), 203-210 |
15 | Jeon, S.J., Chung, C.H., Jin, B.M. and Kim, Y.J. (2004), 'Liquid tightness design of LNG storage tank incorporating cryogenic temperature-induced stresses', Proc. of CONSEC'04, Korea |
16 | Nakano, M. (2001), 'Technological trend and latest technological development of LNG inground storage tanks', J. Construction Management and Engineering (Japan Society of Civil Engineers), 51(679), 1-20 |
17 | Nawy, E.G. (1985), 'Flexural cracking behavior of pretensioned and post-tensioned beams: The state of the art', ACI J., 82(6), 890-900 |
18 | Rashed, A., Elwi, A.E. and Rogowsky, D.M. (2002), 'Reinforced, partially prestressed concrete water tank walls', ACI Struct. J., 99(3), 288-298 |
19 | Shekarchi, M., Debicki, G, Granger, L. and Billard, Y. (2002), 'Study of leaktightness integrity of containment wall without liner in high performance concrete under accidental conditions - I. Experimentation', Nucl. Eng. Des., 213(1), 1-9 DOI ScienceOn |
20 | Suri, K.M. and Dilger, W.H. (1986), 'Crack width of partially prestressed concrete members', ACI J., 83(5), 784-797 |
21 | Watanabe, N., Endo, H., Xuehui, A., Nakano, M. and Aoki, H. (2003), 'Application of non-linear analysis to structural design of a LNG inground tank', J. Construction Management and Engineering (Japan Society of Civil Engineers), 60(742), 87-100 |
22 | Wermann, T. (1998), 'Cryogenic cube tests - Leakage, temperature, deformation', http://www.concrete.ct.tudelft. nl |
23 | Miura, T. (1989), 'The properties of concrete at very low temperatures', Materials and Structures, 22(130), 243-254 DOI |