• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.4
• /
• pp.456-466
• /
• 2004

An experimental study has been conducted to investigate the flow and heat/mass transfer characteristics within a rectangular film cooling hole of normal injection angle for various blowing ratios and Reynolds numbers. The results are compared with those for the square hole. The experiments have been performed using a naphthalene sublimation method and the flow field has been analyzed by numerical calculation using a commercial code (FLUENT). The heat/mass transfer around the hole entrance region is enhanced considerably due to the reattachment of separated flow and the vortices generated within the hole. At the hole exit region, the heat/mass transfer increases because the main flow induces a secondary vortex. It is observed that the overall heat/mass transfer characteristics are similar to those for the square hole. However, the different heat/mass transfer patterns come out due to increased aspect ratio. Unlike the square hole, the heat/mass transfer on the trailing edge side of hole entrance region has two peak regions due to split flow reattachment, and heat/mass transfer on the hole exit region is less sensitive to the blowing ratios than the square hole.

• Journal of Oriental Neuropsychiatry
• /
• v.15 no.2
• /
• pp.173-180
• /
• 2004

Objectives : The purpose of this study is to investigate the change of cerebral blood flow velocity by different types of suggestion in normal subject. Methods : Suggestion of ascending qi inducement and descending qi inducement which were recomposed from autogenic training, was operated on 60 normal subjects individually. Then cerebral blood flow velocity was examined by Transcranial doppler ultrasonography(TCD) each 5 minutes before and after suggestion. Results : The result shows that cerebral blood flow(CBF) velocity was increased significantly in suggestion of ascending qi inducement and CBF velocity was decreased significally after 1 minute in suggestion of descending qi inducement. Conclusion : Suggestion could have affected to CBF velocity, and also different types of suggestion could have affected to the change of brain blood flow. Various clinical studies should be completed on patients in the future.

• Korean Journal of Veterinary Research
• /
• v.37 no.3
• /
• pp.661-668
• /
• 1997

Portal blood flow was measured with pulsed doppler ultrasound in thirty normal dogs. In normal dogs, the average portal blood flow velocity was $17.03{\pm}1.75cm/sec$ and the average portal blood flow was $41.59{\pm}10.10ml/min/kg$. The incident angle between the doppler beam and the portal vein averaged $65^{\circ}$. The average portal vein sectional area was $0.41{\pm}0.14cm^2$. The Congestion index was $0.0245{\pm}0.0081cm{\cdot}sec$. Conclusively, the spectral doppler ultrasonography was quick, non-invasive and simple diagnostic method in circulatory disorders of liver.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.11
• /
• pp.243-251
• /
• 2021

The goal of this study is to examine the characteristics of Chinese visitors visiting Thailand, determine the rules, and give a reference for Thai tourism authorities and businesses when developing marketing strategies for the Chinese market. This paper constructs the tourism flow network and takes Bangkok as the major research target. The statistical characteristics of the network are studied using the SNA method, based on the trip notes of Thailand on www.mafengwo.cn, a prominent travel website in China as the data source. The results show that: Shanghai, Beijing, and Tianjin occupy important positions in the network; The flow direction of Chinese tourists to Thailand mainly tends to Bangkok, Chiang Mai, Pattaya, and Phuket Island; Grand Palace have strong tourism flow aggregation, diffusion, and control over other nodes in the whole network structure; Tom Yu Kuang has the greatest degree centrality in all Thai cuisine. The findings of the study can help relevant management departments create tourist policies and modify market strategies by developing the regular characteristics of China's tourism flow to Thailand in the theoretical field.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.416-421
• /
• 2000

The performance of gas turbine engines is affected by instabilities, like as rotating stall and/or surge. Rotating Stall is a transient intermediate stage between normal flow and complete flow breakdown leading to engine surge. Rotating Stall is associated with large amplitude nonaxisymmetric flow variations rotating around the compressor annulus. This paper presents the evolutions of stall propagation in a compressor cascade by numerical analysis. The flow phenomena due to stall cells and propagation speed are examined using 2 dimensional Navier - Stokes equations.

• Journal of the Korean Mathematical Society
• /
• v.57 no.2
• /
• pp.313-329
• /
• 2020

In this paper, we derive various differential Harnack estimates for positive solutions to the nonlinear backward heat type equations on closed manifolds coupled with the Ricci-Bourguignon flow, which was done for the Ricci flow by J.-Y. Wu [30]. The proof follows exactly the one given by X.-D. Cao [4] for the linear backward heat type equations coupled with the Ricci flow.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1987-1992
• /
• 2004

Hemodynamics behavior of the blood flow is influenced by the presence of the arterial stenosis. If stenosis is present in an artery, normal blood flow is disturbed. In the present study, characteristics of steady and pulsatile flow of non-Newtonian fluid, the effects of stenosised geometry are analyzed by numerical simulation. One interesting point is that non-symmetric solutions were obtained at severity stenosis, although the stenosis and the boundary condition were all axisymmetric.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.464-468
• /
• 2003

A general program of three dimensional profile design of impellers for centrifugal/fixed-flow compressors is successfully commercialized using Bezier curves and quasi-3D flow analysis methods. Control points for meridional hub and shroud contours and blade camberline angles are arbitrarily changed to give smooth Bezier curves. With specified blade normal thicknesses, contructed geometry is instantly analyzed using flow analysis methods to be checked.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.64-71
• /
• 2004

A computational study on the supersonic flow around the lateral jet controlled missile has been performed. For this purpose a three dimensional Navier-Stokes computer code(AADL3D) has been developed and case studies have been performed by comparing the normal force coefficient and the moment coefficient of a missile body for different jet flow conditions including jet pressure and jet Mach number. The results show different behavior of normal force and moment variation according to jet pressure variation and jet Mach number variation. From the detailed flow field analyses, it is verified that most of the normal force loss and the pitching moment generation are taken place at the low-pressure region behind the jet nozzle. Furthermore, it is shown that the pitching moment can be efficiently reduced by obtaining the lateral thrust through higher jet Mach number rather than through high jet pressure.

• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.163-172
• /
• 2011

To provide the operation rule curve for suppling instream flow to urban stream from reservoir, the Soho reservoir with watershed area of 7.4 $km^2$ and total water storage of 2.58 $Mm^3$ was planned at the headwaters of the Daejeoncheon. Daily streamflow was simulated and using the simulated streamflow and desired instream flow, the operation rule curve by Senga method was drawn and evaluated through reservoir operation. Senga method is derived by accumulating the differences between streamflow and desired instream flow adversely. Water storages were simulated on a daily basis to supply urban instream flow from Soho reservoir, but the amount of supplying instream flow to urban stream was not nearly increased comparing with that of normal operation that does not used the rule curve. Thereafter the new simulation-based operation rule curve was derived and applied to supply instream flow from Soho reservoir. In normal operation, the amount of instream flow was shown to 15,000 $m^3$/d, but it was increased to 27,700 $m^3$/d in withdrawal limited operation using the new derived rule curve, in which the applicability of this rule curve was proved. Also comparing with the flow duration curves at station just before urban Daejeoncheon stream without and with upstream Soho reservoir, the 95th flow was decreased from 1.64 mm/d to 1.51 mm/d, and the 355th flow was increased from 0.17 mm/d to 0.30 mm/d. Monthly streamflows during October to March were increased from 10.6~24.1 mm to 24.1~34.0 mm with the increasing rate of 141~227%.