• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.720-723
• /
• 1997

The characteristics of ball and beam system using fuzzy inference technique can be described by fuzzy modeling. Therefore, this paper introduces a technique for fuzzy structure identification of nonlinear Input-output relation- ship using an adaptive fuzzy inference system. And the simulation result using adaptive fuzzy inference technique shows its effectiveness for fuzzy structure identification of nonlinear system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.425-428
• /
• 1998

This paper proposes a new fuzzy controller using variable structure control theory. In this paper, after the time-varying fuzzy sliding surface is designed, the fuzzy rules are defined based on the variable structure control theory. This design method makes the fuzzy controller design more structured and can guarantee the stability and robustness of the fuzzy controller and overcome the shortcoming of the variable structure system. Through computer simulation and experiment of nonlinear inverted pendulum system, this thesis demonstrate that system has the robustness against disturbance and modelling error, and the tracking performance of it is improved.

• 제어로봇시스템학회논문지
• /
• 제8권11호
• /
• pp.922-927
• /
• 2002

A variable structure control (VSC) based model following control system that possesses fault detection and isolation (FDI) capability as well as fault tolerance property is proposed. The nonlinear part of the proposed control law. whose magnitude is determined by sliding variables, plays the role of suppressing fault effect. Thus, approximate fault reconstruction is also possible via the analysis of sliding variables. The proposed algorithm is applied to an active suspension system of pound vehicles to verify its applicability.

• 전자공학회논문지SC
• /
• 제44권6호
• /
• pp.1-10
• /
• 2007

본 논문에서는 비선형 다변수 시스템에 적응할 수 있는 신경회로망을 이용한 PID 구조를 갖는 직접 다변수 자기동조 제어기를 제안한다. 제어기에 적용되는 플랜트는 잡음, 시간지연과 상호결합항이 존재하며 파라미터가 변하는 비선형 다변수 시스템이다. 비선형 다변수 시스템은 선형부분과 비선형부분으로 분리한 형태로 구성되며, 선형제어기는 외부환경 변화에 적응할 수 있는 PID 제어기 특성을 가진 자기동조 PID 제어기 이다. 선형부분의 제어기 파라미터는 순환최소자승법으로 직접 추정하고 비선형 부분의 파라미터는 신경회로망으로 추정한다. 그리고 각 부분에서 추정한 파라미터를 합한 후 비선형 다변수 일반화 자기동조 제어기의 제어법칙에 적용한다. 제어 알고리듬의 타당성을 확인하기 위해 시간 지연이 있고 일정한 시간이 경과한 후 시스템의 파라미터가 변하는 비선형 다변수 시스템에 대해 컴퓨터 시뮬레이션을 하였다. 또한 기존의 신경회로망을 이용한 직접 다변수 적응 제어기에 비해 효과적이다.

• 한국항공우주학회지
• /
• 제40권11호
• /
• pp.957-962
• /
• 2012

비행체 구조는 공기력에 의해 변형이 발생하고 이 구조의 변형은 다시 공기력의 변화를 유발하므로 비행체 구조 시스템의 고정밀 설계를 위해서는 공력/구조 연계 해석이 필요하다. 그러나 발생하는 변형이 비선형 구조 해석을 요구할 정도로 큰 경우, 선형 시스템에서와 같이 공력 해석과 구조 해석을 순차적으로 반복하는 연계 해석 기법은 바람직하지 않다. 구조적 변형에 따라 변하는 공기력을 충분히 고려하지 못하며, 소요 시간 또한 크기 때문이다. 본 연구는 공력장 내부의 비선형 구조의 거동을 보다 효율적으로 예측할 수 있는 공력/구조 연계 해석 기법을 다룬다. 즉, 비선형 구조 해석 단계 도중에 주기적으로 공력 해석을 통한 외력 업데이트를 수행하는 알고리즘을 제안한다. 또한 고세장비의 유연날개를 가지는 글로벌 호크 모델을 사용하여 여러 가지 기법의 비선형 공력/구조 연계 해석의 결과를 비교하였다.

• Structural Engineering and Mechanics
• /
• 제40권3호
• /
• pp.431-451
• /
• 2011

Time delay inevitably exists in active control systems, and it may cause the degradation of control efficiency or instability of the systems. So time delay needs to be compensated in control design in order to eliminate its negative effect on control efficiency. Today time delay in linear systems has been more studied and some treating methods had been worked out. However, there are few treating methods for time delay in nonlinear systems. In this paper, an active controller for a nonlinear and hysteretic building structure with time delay is studied. The nonlinear and hysteretic behavior of the system is illustrated by the Bouc-Wen model. By specific transformation and augmentation of state parameters, the motion equation of the system with explicit time delay is transformed into the standard state space representation without any explicit time delay. Then the fourth-order Runge-Kutta method and instantaneous optimal control method are applied to the controller design with time delay. Finally, numerical simulations and comparisons of an eight-story building using the proposed time-delay controller are carried out. Simulation results indicate that the control performance will deteriorate if time delay is not taken into account in the control design. The simulations also prove the proposed time delay controller in this paper can not only effectively compensate time delay to get better control effectiveness, but also work well with both small and large time delay problems.

• International Journal of Control, Automation, and Systems
• /
• 제3권spc2호
• /
• pp.296-301
• /
• 2005

As a new control strategy, the Nonlinear PID (NLPID) controller has been introduced successfully in power systems. The controller is free of planting model groundwork during the design procedure and is therefore able to be achieved quite simply. In this paper, a nonlinear PID controller used for a superconducting magnetic energy storage (SMES) unit connected to a power system is proposed. The purpose of designing such a controller is to improve the stability of the power system in a relatively wide operation range. The design procedure takes into account the active and reactive power cooperative control scheme as well as the simple structure so as to be more apt to practical utilization. Simulation is carried out to investigate the performance of the proposed controller in a high order nonlinear power system model under the. MATLAB environment. The results show satisfactory performance and good robustness of the controller. The feasibility of the controller is testified as well.

• 로봇학회논문지
• /
• 제5권2호
• /
• pp.160-168
• /
• 2010

In order to achieve a force controller with high performance, an accurate torque servo is required. However, the precise torque servo for a double vane rotary actuator system has not been developed till now, due to many nonlinear characteristics and system parameter variations. In this paper, the torque servo structure for the double vane rotary actuator system is proposed based on the torque model. Nonlinear equations are set up using dynamics of the double vane rotary hydraulic actuator system. Then, to derive the torque model, the nonlinear equations are linearized using a taylor series expansion. Both effectiveness and performance of the design of torque servo are verified by torque servo experiments and applying the suggested torque model to an impedance controller.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.915-923
• /
• 2008

This paper focuses on optimal tuning of nonlinear parameters of a dual-input power system stabilizer(dual-input PSS), which can improve the system damping performance immediately following a large disturbance. Until recently, various PSS models have developed to bring stability and reliability to power systems, and some of these models are used in industry applications. However, due to non-smooth nonlinearities from the interaction between linear parameters(gains and time constants of linear controllers) and nonlinear parameters(saturation output limits), the output limit parameters cannot be determined by the conventional tuning methods based on linear analysis. Only ad hoc tuning procedures('trial and error' approach) have been used. Therefore, the steepest descent method is applied to implement the optimal tuning of the nonlinear parameters of the dual-input PSS. The gradient required in this optimization technique can be computed from trajectory sensitivities in hybrid system modeling with the differential-algebraic-impulsive-switched(DAIS) structure. The optimal output limits of the dual-input PSS are evaluated by time-domain simulation in both a single machine infinite bus(SMIB) system and a multi-machine power system in comparison with those of a single-input PSS.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.153-177
• /
• 2013

Pendulums can be used as passive vibration control devices in several structures and machines. In the present work, the nonlinear behavior of a pendulum-tower system is studied. The tower is modeled as a bar with variable cross-section with concentrated masses. First, the vibration modes and frequencies of the tower are obtained analytically. The primary structure and absorber together constitute a coupled system which is discretized as a two degrees of freedom nonlinear system, using the normalized eigenfunctions and the Rayleigh-Ritz method. The analysis shows the influence of the geometric nonlinearity of the pendulum absorber on the response of the tower. A parametric analysis also shows that, with an appropriate choice of the absorber parameters, a pendulum can decrease the vibration amplitudes of the tower in the main resonance region. The results also show that the pendulum nonlinearity cannot be neglected in this type of problem, leading to multiplicity of solutions, dynamic jumps and instability. In order to improve the effectiveness of the control during the transient response, a hybrid control system is suggested. The added control force is implemented as a non-linear variable stiffness device based on position and velocity feedback. The obtained results show that this strategy of nonlinear control is attractive, has a good potential and can be used to minimize the response of slender structures under various types of excitation.