• 제목/요약/키워드: nonferrous metal

검색결과 48건 처리시간 0.024초

DRUM impactor를 이용한 대기 입자상 물질 중 원소성분의 입경분포 특성 : 제주도 고산지역의 2002년 봄철 (3.29-5.30) 측정 연구 (Size Distributions of Trace Elements in Airborn Particulates Collected using Drum impactor at Gosan, Jeju Island : Measurements in Springtime 2002)

  • 한진석;문광주;류성윤;안준영;공부주;홍유덕;김영준
    • 한국대기환경학회지
    • /
    • 제20권4호
    • /
    • pp.555-569
    • /
    • 2004
  • Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn't pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.

핫 프레스 포밍을 위한 고열전도성 금형에 대한 연구 (Tough High Thermal-Conductivity Tool Steel for Hot Press Forming)

  • 금종원;박옥조;홍석무
    • 한국기계가공학회지
    • /
    • 제15권3호
    • /
    • pp.130-134
    • /
    • 2016
  • Due to the need for advanced technologies in the automotive industry, the demand for lighter and safer vehicles has increased. Even though various nonferrous metals, like Aluminum, Magnesium and also Carbon Fiber Reinforced Plastic (CFRP), have been implemented in the automotive industry, a lot of technical research and development is still focused on ferrous metals. In particular, the market volume of High Strength Steel (HSS) parts and Ultra High Strength Steel (UHSS) by hot press forming parts has expanded significantly in all countries' automotive industries. A new tool steel, High Thermal-Conductivity Tool Steel (HTCS), for stamping punches and dies has been developed and introduced by Rovalma Company (Spain), and it is able to support better productivity and quality during hot press forming. The HTCS punches and dies could help to reduce cycle time due to their high thermal conductivity, one of the major factors in hot press forming operation. In this study, test dies were manufactured in order to verify the high thermal conductivity of HTCS material compared to SKD6. In addition, thermal deformation was inspected after the heating and cooling process of hot press forming. After heating and cooling, the test dies were measured by a 3D scanner and compared with the original geometry. The results showed that the thermal deformation and distortion were very small even though the cooling time was reduced by 2 seconds.

강하분진의 침적 특성파악을 위한 통계학적 해석과 공간분포 분석 (A Statistical Analysis and Spatial Distribution Analysis for Deposition Characteristics of Fall-out Particles)

  • 주재희;황인조
    • 한국대기환경학회지
    • /
    • 제28권3호
    • /
    • pp.294-305
    • /
    • 2012
  • The objective of this study is to estimate the chemical compositions and to identify qualitative sources of fall-out particles in study area. Also, this study used a spatial analysis to estimate spatial distributions and average deposition flux. In this study, the chemical compositions of fall-out particle samples collected at Muncheon lake from May 2010 to January 2011 were analyzed by ICP and IC. The monthly trend of deposition fluxes for fall-out particles showed highest in June ($107.61kg/km^2/day$) and lowest in October ($22.22kg/km^2/day$). The average fluxes of Fe, Si, Al, Zn and Ba are 0.44, 0.24, 0.20, 0.17, $0.09kg/km^2/day$, respectively. Also, the average fluxes of $NO_3^-$, $SO_4^{2-}$, $NH_4^+$, $Ca^{2+}$, and $Na^+$ are 6.48, 5.01, 4.96, 1.75, $1.37kg/km^2/day$, respectively. A Factor analysis identified four sources such as 1) nonferrous metal, motor vehicle, and agriculture, 2) soil, 3) field burning, incineration, and 4) road dust and oil burning. The IDW (inverse distance weighting) spatial analysis method was used to estimate spatial distribution and average deposition flux for fall-out particles. A total average deposition fluxes estimated in Muncheon lake were 936.15 kg/month. The spatial distribution trend of deposition flux showed higher at site 1 and 2 than at site 3, 4 because local road is adjacent to the site 1 and 2.

페로니켈슬래그 미분말 및 혼화재의 복합사용에 따른 모르타르의 강도 및 내구성 평가 (Evaluation of Strength and Durability of Mortar using Ferronickel Slag Powder and Admixtures)

  • 조설아;유정환;박상순
    • 한국건설순환자원학회논문집
    • /
    • 제7권3호
    • /
    • pp.262-270
    • /
    • 2019
  • 본 논문에서는 페로니켈슬래그 미분말 및 혼화재의 복합사용에 따른 모르타르의 강도 및 내구성 평가를 실시하였다. 페로니켈슬래그 및 생석회, 석고, 염화칼슘을 OPC 대비 20%로 치환하여 복합사용 하였으며, 휨강도 및 압축강도, SEM분석을 통한 모르타르의 강도 평가를 실시하였다. 석고를 혼화재로 사용하였을 때 초기강도 발현은 보이지만, 페로니켈슬래그 및 생석회, 염화칼슘을 혼화재로 복합사용 하였을 때 강도발현과 강도증진효과가 극대화 되었으며, 혼화재의 적절한 복합사용이 미세한 공극 채움과 밀도개선효과로 인해 강도와 내구성 개선에 영향을 주는 것으로 판단된다. 또한 화학적침식저항성 및 XRD 분석을 통해 혼화재의 적절한 복합사용은 수화 생성물인 Muscovite의 함량에 따라 강도가 증가하는 경향을 보였고, 규산염은 산 알칼리에는 용해되지 않으므로 화학적 침식 저항 성능이 OPC에 비하여 우수한 것으로 사료된다.

일 지역 중.고등학생들의 환경성 질환 및 보건교육 실태 조사 (Research on the Actual State of Environmental Disease and Health Education at Middle and High School Students)

  • 정종현;문기내;서보순;김창태;이재홍
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제12권3호
    • /
    • pp.65-87
    • /
    • 2011
  • Objectives: The purpose of this study was to perform basic study on environmental and respiratory diseases in Ulsan and vicinities. Also, this study evaluated the actual state of environmental disease and health education at middle and high schools in Ulsan and surroundings. Methods: For this study, we conducted a survey on the health of the general public, environmental effects, and investigated the characteristics of environmental disease, health and hygiene education, etc. The populations of this study were middle and high school students in Ulsan, Korea. This study investigated the knowledge of environmental disease and health education at schools in Ulsan and vicinities from November 2009 to December 2009. All statistical calculations were performed with Statistical Package for Social Sciences (SPSS) for Windows, and gained the following results by implementing Frequency Analysis, Cross-tabulation Analysis and ANOVA. Results: As more and more environmental diseases are increased, the interest of the people has been increasing on this. The incidence rates of asthma and atopy were represented the top 25% of the country in Korea. The source of heavy metal, PAHs and VOCs in Ulsan includes the Petrochemical Complex at Nam-gu and Ulju-gun, the Nonferrous Metal Industrial Complex at Onsan-eup, Ulju-gun, and the Heavy Industrial Complex at Dong-gu and Buk-gu. Especially, there are a number of fossil fuel combustion facilities such as waste incineration plants and boilers at Nam-gu and the Onsan Industrial Complex. It may help greatly to investigate the characteristics of environmental pollutants such as environmental air pollutant and indoor contaminant to better manage the local student's health. Conclusions: It has been revealed that the hazardous chemicals and environmental contaminants are main substances of cause for asthma, atopy, dermatitis, and allergy disease. Therefore, through with collecting basic data such as environmental disease of inhabitants, health education, conscious and knowledgeable level in parents of students and students, We have to exert to improve knowledge and prevention with health life in school through development of health education program systematically for preventing of environmental disease.

  • PDF

PMF 분석을 이용한 ACE-Asia 측정기간 중 제주 고산지역 입자상 물질의 입경별 발생원 추정 (Size-resolved Source Apportionment of Ambient Particles by Positive Matrix Factorization at Gosan, Jeju Island during ACE-Asia)

  • 문광주;한진석;공부주;정일록
    • 한국대기환경학회지
    • /
    • 제22권5호
    • /
    • pp.590-603
    • /
    • 2006
  • Size-and time-resolved aerosol samples were collected using an eight-stage Davis rotating unit for monitoring (DRUM) sampler from 23 March to 29 April 2001 at Gosan, Jeju Island, Korea, which is one of the super sites of Asia-Pacific Regional Aerosol Characterization Experiment(ACE-Asia). These samples were analyzed using synchrotron X-ray fluorescence for 3-hr average concentrations of 19 elements including Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb, and Pb. The size-resolved data sets were then analyzed using the positive matrix factorization(PMF) technique to identify possible sources and estimate their contributions to particulate matter mass. PMF analysis uses the uncertainty of the measured data to provide an optimal weighting. Twelve sources were resolved in eight size ranges($0.09{\sim}12{\mu}m$) and included continental soil, local soil, sea salt, biomass/biofuel burning, coal combustion, oil combustion, municipal incineration, nonferrous metal source, ferrous metal source, gasoline vehicle, diesel vehicle, and volcanic emission. The PMF result of size-resolved source contributions showed that natural sources represented by local soil, sea salt, continental soil, and volcanic emission contributed about 79% to the predicted primary particulate matter(PM) mass in the coarse size range ($1.15{\sim}12{\mu}m$) while anthropogenic sources such as coal combustion and biomass/biofuel burning contributed about 58% in the fine size range($0.56{\sim}2.5{\mu}m$). The diesel vehicle source contributed mostly in ultra-fine size range($0.09{\sim}0.56{\mu}m$) and was responsible for about 56% of the primary PM mass.

산업재 거래관계와 구조적 결합: 미국 금속산업의 분석 연구 (Business Relationships and Structural Bonding: A Study of American Metal Industry)

  • 한상린;김윤태;오창엽;정재문
    • 마케팅과학연구
    • /
    • 제18권3호
    • /
    • pp.115-132
    • /
    • 2008
  • 산업재 거래관계에서 구매자와 공급업체간의 장기 거래관계의 형성은 전형적인 현상이며 그동안 많은 연구들이 이러한 장기관계의 결정 요인과 그로 인한 결과에 관해 다양한 연구들을 수행해 왔다고 할 수 있다. 특히 금속산업은 산업재의 대표적인 산업 분야로 미국 금속산업 시장의 경우 기업당 평균 매출이 최소 10억 달러가 넘는 중요한 시장이라고 볼 수 있다. 본 연구에서는 이러한 중요한 의미를 갖는 미국 금속산업 시장에서 구매기업과 공급기업간의 거래관계를 형성하는 대표적인 요인으로 구조적 결합이라는 개념을 정립하고 이러한 구조적 결합을 결정하는 네가지 주요 변수(기술, 대체안 비교수준, 거래특유자산, 거래 중요성)들을 찾아내 이를 연구모형화하고 각각의 변수에 대한 연구가설을 다음과 같이 설정하였다. H1: 기술수준은 구조적 결합에 정의 영향을 미칠 것이다. H2: 대체안 비교수준은 구조적 결합에 정의 영향을 미칠 것이다. H3: 거래특유자산은 구조적 결합에 정의 영향을 미칠 것이다. H4: 거래의 중요성은 구조적 결합에 정의 영향을 미칠 것이다. H5: 구조적 결합은 몰입의 수준에 정의 영향을 미칠 것이다. 연구 가설의 검증을 위해 미국 금속산업에서 400개 기업을 선정해 설문조사를 실시 하였고 총 139개의 설문지를 회수하여 최종 분석에 사용하였다. 연구 가설과 연구 모형의 검증을 위해 구조방정식 모형과 LISREL을 사용하였고 최종 분석 결과 모든 가설이 체택되었다. 마지막으로 본 연구결과를 통한 마케팅전략적 시사점과 연구가 갖는 한계점에 대하여도 결론 부분에서 토론하였다.

  • PDF

항만의 경쟁구조 분석에 관한 연구: 서해안권 항만 수출입품목을 중심으로 (An Analysis of the Port Competition Structure: Focusing on Import and Export Items of Ports in Western Coast Region)

  • 이진규;여기태
    • 한국항만경제학회지
    • /
    • 제31권4호
    • /
    • pp.75-89
    • /
    • 2015
  • 본 연구에서는 각 항만들이 다루고 있는 31개의 수출입화물품목에 대하여 품목간 항만간 경쟁을 규명하고, 실제 항만간 전이량을 파악한 후, 가장 큰 폭의 물동량 하락을 경험하고 있는 항만의 향후 정책에 대한 제언을 하는 것을 연구 목적으로 하였다. 2005년~2014년 서해안 권역의 물동량 집중도는 점차 분산화되고 있는 것으로 나타났다. 특히 2009년을 기점으로 급격히 분산화가 진행되었으며 2014년에는 0.448으로 나타나 권역별 경쟁이 치열해지고 있었다. BCG Matrix를 이용해 인천항, 평택 당진항, 군산항의 정적포지셔닝과 동적포지셔닝을 분석한 결과, 정적포지셔닝분석에서는 인천항은 3사분면(Cash Cows),평택 당진항은 2사분면(Question Marks), 군산항은 (Dogs)군에 위치하고 있는 것으로 나타나 인천항은 비록 성장률은 낮지만 상대 항만군에 대한 높은 점유율로써 그 위치를 유지하고 있었다. 그러나 동적포지셔닝 분석에서는 시간이 흐름에 따라 인천항의 시장점유율과 성장률은 하락하고 있는 것으로 나타났다. 전이할당 분석결과, 인천항과 군산항의 물동량은 평택항으로 전이되고 있으며, 인천항과 군산항은 잠재성장치 대비 절대성장치가 평택 당진항보다 크게 못 미치는 것으로 밝혀졌다. LQ지수 분석결과, 타 항만과 중복되지 않는 인천항의 특화품목은 육류, 어패류 갑각류 등, 유연탄, 원유 및 석유, 석유정제품, 플라스틱 고무 및 그 제품, 방직용 섬유 및 그 제품, 비철금속 및 그 제품, 전기기기 및 그 제품, 항공기, 선박 및 그 부품으로 10개 품목으로 분석되었다.