• The Journal of the Petrological Society of Korea
• /
• v.10 no.3
• /
• pp.202-211
• /
• 2001

Luminescence is a physical phenomenon exhibited by many non-conducting, crystalline materials, such as quartz and feldspar. Within the crystals, energy absorbed from ionising radiation frees electrons to move through the crystal lattice and some are trapped at defects in the lattice. Observable luminescence is produced by electrons, released from traps by stimulation by absorption of light, which recombine with lattice defects which act as luminescence centers - optically stimulated luminescence (OSL). In a similar way to thermoluminescence(TL) dating, controlled measurement of the OSL signal can provide a means of determining the time since the last exposure of a layer of sediment to sunlight, the age of the sediment. However, whereas in the thermoluminescence dating of sediment only part of the latent thermoluminescence signal is bleached by sunlight as the sediment is deposited and allowance must be made during the laboratory measurements for the light insensitive component, optically induced luminescence dating has the advantage of working only with light sensitive traps in the crystal. Determination of the time since deposition of Quaternary sediment samples from the OSL of quartz grains using blue light was performed. A series of experiments and recent developments relating OSL dating are described, beginning by identifying the features which make OSL signals suitable for the development of dating method. Additionally, there are suggestions as to future research for obtaining reliable ages and a comment on current best practice on procedures, with the dating results of Quaternary sediment.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.3
• /
• pp.195-211
• /
• 2004

Stress is a primary health promotion issue in worksite research because psychological distress is closely related not only to workers' health status but also to their job performance. This study identified the significant health behaviors affecting workers' job-related stress in Korean manufacturing industry with the national survey data conducted by the Korean Occupational Safety and Health Agency in 2003. A total of 7,818 factory workers in 1,562 manufacturing companies participated in the Korean nation-wide occupational health survey and 3,390 workers answered that they had any stressors in their workplace among the 7,818 workers finally participated in the analysis. Participants were selected by the stratified proportional sampling process by manufacturing industry classification, company size, and company locations (8 metropolitan and 8 non-metropolitan regions) in Korea. Trained interviewers visited the target companies and interviewed the factory workers randomly selected in each company. Smoking, drinking, weight control, exercise, sleeping, break time at work, and perceived fatigue were included in the health behavior construct. Stress symptoms was consisted of physical and psychological stress with 8 items. All survey responses were anonymously coded into the SPSS statistical program and testified using stepwise multiple regression analysis. Male workers were 73.5% and the 30s were 40.0% among the age groups. The married and the high school graduate were majority with 52.1% and 61.8% each. Current smokers were 44.7% and More than 50% of the participants drank alcohol sometimes. No exercise group was 59.3% and the participants who dissatisfied with their daily sleeping hours were 43.5%. In t-test and analysis of variance, the significant general characteristics associated with physical and psychological job stress were young age (p<0.001), single marital status (p<0.001), and short working period at the present company (p<0.001). The health behaviors related to physical job stress were current smoking, weight change during the past one year (p<0.001), weight control effort (p<0.001), exercise (p<0.001), daily sleeping dissatisfaction (p<0.001), break time, and perceived fatigue (p<0.001). All 10 health behavior factors were significantly associated with psychological job stress (p<0.05). Weight change, weight control effort, exercise, daily sleeping dissatisfaction, little break at work, and high perceived fatigue were significant factors affecting job stress. Daily sleeping dissatisfaction, little break at work, little exercise, weight change for the past one year and young age were selected as the significant health behavior and general factors affecting physical job stress symptoms in stepwise multiple regression analysis. The five factors explained 18.9% of the physical stress score variance. Six factors were selected as the significant health behaviors affecting psychological job stress: daily sleeping dissatisfaction, little exercise, frequent drinking alcohol, high perceived fatigue, little break at work, and little weight control effort. The six factors explained 10.6% of the psychological stress score variance.

• 한국사회복지학회:학술대회논문집
• /
• 2003.10a
• /
• pp.185-216
• /
• 2003

This study was aimed at investigating important factors influencing career success among regular workers. The current researcher scrutinized the degree to which variables and factors affect the career success and occupational turnover rates of the research participants. At the same tune, two hypothetical path models established by the researcher were examined using linear multiple regression methods and the LISREL. After examining the differences among the factors of career success, a comparison was made between the disabled worker group and the non-disabled worker group. A questionnaire using the 5-point Likert scale was distributed to a group of 374 workers with disabilities and 463 workers without disabilities. For the data analysis purpose, the structural equation model, factor analysis, correlation analysis, and multiple regression analysis were carried out. The results of this study ran be summarized as follows. First, the results of factor analysis showed important categories of conceptual themes of career success. The initial conceptual factor model did not accord with the empirical one. A three-factorial model revealed categories of personal, family, and organizational factor respectively. The personal factor was composed of the self-esteem and self-efficiency. The family factor was consisted of the multi-roles stress and the number of children. Finally, the organizational factor was composed of the capacity for utilizing resources, networking, and the frequency of mentoring. In addition, the total 10 sub areas of career success were divided by two important aspects; the subjective career success and the objective career success. Second, both research participant groups seemed to be influenced by their occupational types. However, all predictive variables excluding the wage rate and the average length of work years had significant impact on job success for the disabled work group, while all the variables excluding the frequency of advice and length of working years had significant impact on job success for the non-disabled worker group. Third, the turnover rate was significantly influenced by the age and the experience of turnover of the research participants. However, the number of co-workers was the strongest predictive variable for the worker group with disabilities, but the occupation choice variable for the worker group without disabilities. For the disabled worker group, the turnover rate was differently influenced by the type of occupation, the length of working years, while multi-role stress and the average working years at the time of turnover for the worker group without disabilities. Fifth, as a result of verifying the hypothetical path model, it showed that the first model was somewhat proper and could predict the career success on both research participant groups. In the second model, the Chi-square, the degree of freedom (($x^2=64.950$, df=61, P=0.341), and the adjusted Goodness of Fit Index (AGFI) were .964, and the Comparative Fit Index (CFI) were .997, and the Root Mean Squared Residual (RMR) was respectively. .038. The model was best fitted and could predict the career success more highly because the goodness of fit index in the whole models was within the allowed range. In conclusion, the following research implications can be suggested. First, the occupational type of research participants was one of the most important variables to predict the career success for both research participant groups. It means that people with disabilities require human development services including education. They need to improve themselves in this knowledge-based society. Furthermore, for maintaining the career success, people with disabilities should be approached by considering the subjective career success aspects including wages and the promotion opportunities than the objective career success aspects.

• Korean journal of applied entomology
• /
• v.51 no.2
• /
• pp.171-190
• /
• 2012

The Korean Society of Applied Entomology (KSAE) celebrates its First 50 years history this year, 2011. It began in the year 1962, as the Korean Society of Plant Protection (KSPP) to discuss all aspects of plant protection including entomology and plant pathology. At that time it was one of the earliest scientific ones among agricultural societies in Korea. Before liberation from the Japanese colonial rule there were a few scientific societies for Japanese scientists only in the Korean Peninsula. It seemed that there was a single exception, in medical field, formed by and operated for Korean ethnics. Right after the liberation, Korean scientists rushed to form new scientific societies in the fields of mechanical engineering, architecture, textile, internal medicine, biology, etc. in 1945, mathematics, chemistry, metallurgy, etc. in 1946, and so on. But agricultural scientists had to wait for more time before setting up their own scientific society, Korean Agricultural Society(韓國農學會), comprising all agricultural subfields, in 1954. They had annual meetings and published their own journal every year until 1962. Then those working in the plant protection field established their own KSPP, right after their section meeting in 1962. At that time the total number of participants for KSPP were only around 50. KSPP scientists were interested in plant pathology, agricultural chemicals, weed science, or bioclimate, besides entomology. They had annual meetings once or twice a year until 1987 and published their own journal, Korean Journal of Plant Protection (KJPP), once a year at the earlier years but soon gradually increasing the frequency to four times a year later. Articles on entomology and plant pathology occupied about 40% each, but the number of oral or posters were a little bit higher on plant pathology than entomology, with the rest on nematology, agricultural chemicals, or soil microarthropods. There also had a number of symposia and special lectures. The presidentship lasted for two years and most of president served only one term, except for the first two. The current president should be $28^{th}$. In the year 1988, KSPP had to be transformed into the applied entomology society, Korean Society of Applied Entomology (KSAE), because most of plant pathologists participating left the society to set up their own one, Korean Society of Plant Pathology in 1984. Since that time the Society concentrates on entomology, basic and applied, with some notes on nematology, acarology, soil microarthropods, agricultural chemicals, etc. The Society has been hosting annual meetings at least twice a year with special lectures and symposia, from time to time, on various topics. It also hosted international symposia including binational scientific meetings twice with two different Japanese (applied entomology in 2003 and acarology in 2009) societies and the Asia-Pacific Congress of Entomology in 2005. The regular society meeting of this year, 2011, turns out to be the 43rd and this autumn non-regular meeting would be the 42nd. It has been publishing two different scientific journals, Korean Journal of Applied Entomology (KJAE) since 1988 and the Journal of Asia-Pacific Entomology (JAPE) since 1998. Both journals are published 4 times a year, with articles written in Korean or English in the first, but those in English only in the latter with cooperation from the Taiwan Entomological Society and the Malaysian Plant Protection Society since 2008. It is now enlisted as one of those SCI(science citation index) extended. The highest number of topics discussed at their annual meetings was on ecology, behavior, and host resistance. But at the annual meetings jointly with the Korean Society of Entomology, members were more interested in basic aspects, instead of applied aspects, such as physiology and molecular biology fields. Among those societies related to entomology and plant protection, plant pathology, pesticide, and applied entomology societies are almost similar in membership, but entomology and plant pathology societies are publishing more number of articles than any others. The Society is running beautifully, but there are a few points to be made for further improvement. First, the articles or posters should be correctly categorized on the journals or proceedings. It may be a good idea to ask members to give their own version of correct category for their submissions, either oral or poster or written publication. The category should be classified detailed as much as possible (one kind of example would be systematics, morphology, evolution, ecology, behavior, host preference or resistance, physiology, anatomy, chemical ecology, molecular biology, pathology, chemical control, insecticides, insecticide resistance, biocontrol, biorational control, natural enemies, agricultural pest, forest pest, medical pest, etc.) and such scheme should be given to members beforehand. The members should give one or two, first and second, choices when submitting, if they want. Then the categories might be combined or grouped during editing for optimal arrangement for journals or proceedings. Secondly the journals should carry complete content of the particular year and author index at the last issue of that year. I would also like to have other information, such as awards and awardees in handy way. I could not find any document for listing awards. Such information or article categorization may be assigned to one of the vice presidents. I would rather strongly recommend that the society should give more time and energy on archive management to keep better and more correct history records.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1976

This paper is the third one of the study on balanced type oscillating mole-drainer, the first one was presented in No 9. Gyeongsang College Report and the second one in Vol. 17, No.4 of the KSAE. In the first part of this study, the characteristics of traction forces between the nonoscillating earth working equipments and oscillating ones was compared. A model of the balanced type oscillating mole-drainer, which composed of a mechanism that may reduce the machine vibration, was designed following the dimensional analysis and similitude technique. The model test was carried out to clarify the balancing mechanism of the oscillating parts and other parts of the machine. In the light of the results from the model tests, a prototype machine was made for experimental purpose. Results from the field test by a reported in the near future. In the second report, the model tests were carried out under the same soil conditions, i.e, . oscillating frequency, running velocity, and oscillating amplitude, etc. It was clear that use of balanced type oscillating model could substantially reduce the vibration of the whole system of the machine, when compared with the nonoscillating type model. In this paper(the third report), results of investigation on the traction force, power requirement, and moment. etc, is presented. Analysis of variance technique was used for analyzing the effect of the frequency, amplitude, and running velocity on the draft force, torque, power requirements, and moments. The results obtained from the model tests are as follows, 1) By practicing a balanced-type oscillating mole-drainer, it was possible to reduce the traction resistance by 55.1-61. 2 percent of traction resistance, however, was 1.75 - 1.95 times greater than the value of resistance which was induced by use of a mole-drainer with single bullet. The resistance of rear shank against soil was considered as a main causing factor of the above results. 2) As the oscillation frequency was increased, the traction resistance was decreased. Considering on the effect of oscillation the greater the amplitude, and the slower the running velocity was, the greater the reduction ratio of traction resistance was. 3) The ratio of the traction resistance of oscillating mole-drainer to that of non-oscillating one could be represented as a function of dimensionless variable (V/$Af$). The results from the tests were well agreed with the reported results from the experim ents on oscillation plow or hoe. 4) By taking a lower value of (V/$Af$), reducing the traction resistance was possible. This fact meant, however, that the efficiency of mole drain practice would be lower. 5) It was experimentally confirmed under the same condition of soil that the variable (R/$rD1^3$) could be represented as a function of a variable($V^2/gD$) when a non\ulcornerocillating mole-drainer was used. 6) When a oscillating mole-drainer was used, the variable(R/$rD_1^{3}$) could be represented as a function of two variables ($v^2/gD_1$) and (V^2/gD_1$). 7) The torque was not affected by a change of frequency. However, a relation of proportionality existed between torque and amplitude, running velocity, and ratio of bullet diameter. When a balanced type oscillating mole-drainer with two bullets was used, torque was increased by 52.8-78. 4 percent and total power requirement was also increased. 8) Total power requirement was increased linearly in accordance with the increasing frequency, 41.96 percent of total power was used for oscillating action. The magnitude of total power requirement was 1. 8-9. 4 times greater than that of a non-oscillating mechanism. In the view point of power requirement, it was not advisable to increase the frequency, amplitude, running velocity, and ratio of bullet diameter at the same time. 9) Only the positive moment occured in the rear shank. Change of the diameter of a rear bullet, could not affect the balancing against the soil resistance. It was necessary for rear bullet to have a large resistance against soil only when the rear bullet was in backward motion. 10) Within an extent of the experimental base, optimum limits for several design factors were A=0.5cm, $f$=22.5Hz, V=O. 05m/sec, and $\lambda$=1.0 By adapting these values traction resistance was reduced by 40 percent and vibration acceleration wa s reduced by 60 percent. Even though the total , power requirements for operating a balanced type oscillation mechanism was greater ~than that of non-oscillating one, using a oscillating mechanism would be more effective. Because a balanced type oscillating mechanism is used, tractive resistance will be reduced and then the lighter . tractive equipment could be used.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.45-54
• /
• 2021

This study was written to create educational content in non-destructive fields based on Mixed Reality. Currently, in the field of radiation, there is almost no content for educational Mixed Reality-based educational content. And in the field of non-destructive inspection, the working environment is poor, the number of employees is often 10 or less for each manufacturer, and the educational infrastructure is not built. There is no practical training, only practical training and safety education to convey information. To solve this, it was decided to develop non-destructive worker education content based on Mixed Reality. This content was developed based on Microsoft's HoloLens 2 HMD device. It is manufactured based on the resolution of 1280 ⁎ 720, and the resolution is different for each device, and the Side is created by aligning the Left, Right, Bottom, and TOP positions of Anchor, and the large image affects the size of Atlas. The large volume like the wallpaper and the upper part was made by replacing it with UITexture. For UI Widget Wizard, I made Label, Buttom, ScrollView, and Sprite. In this study, it is possible to provide workers with realistic educational content, enable self-directed education, and educate with 3D stereoscopic images based on reality to provide interesting and immersive education. Through the images provided in Mixed Reality, the learner can directly operate things through the interaction between the real world and the Virtual Reality, and the learner's learning efficiency can be improved. In addition, mixed reality education can play a major role in non-face-to-face learning content in the corona era, where time and place are not disturbed.

• Journal of Society of Preventive Korean Medicine
• /
• v.5 no.2
• /
• pp.69-92
• /
• 2001

The purposes of this study were to offer foundation making more certain standards of musculoskeletal disorder diagnosis, We researched musculoskeletal symptoms degrees, frequencies, and cares and then examined relation between musculoskeletal symptoms and diagnosis of musculoskeletal conditions using moire topography among workers at an automobile manufacturing plant. Therefore we propose the possibility of moire topography as diagnosing utilities of musculoskeletal disorders. Methods: This study was to examine the general characteristics, complaints of musculoskeletal symptoms, and work-related musculoskeletal disorder rates of cervicobrachial and lumbar area by survey among 435 workers at an automobile manufacturing plant and then to show each frequency and percentage, In the diagnosis using moire topography, we studied pain control necessity of cervicobrachial and lumbar area, 435 subjects were classified by 5 levels: A(no symptoms), B(need management), C(need treatment) and then more divided by B1(light symptoms)/B2(heavy symptoms), C1(light symptoms)/C2(heavy symptoms), And musculoskeletal areas were divided by 2 parts, cervicobrachial area(neck, shoulder, arm&elbow, and wrist&hand) and lumbar area, Then, frequency and percentage of each musculoskeletal areas(cervicobrachial and lumbar area) were appeared. At last, Pearson's chi-square test analysis was utilized to observe the relation between diagnosis using moire topography and general characteristics and the relation between diagnosis using moire topography and work-related complaint of musculoskeletal symptoms of cervicobrachial and lumbar area, Results: The subjects employed for this research were categorized into; by gender, all of them were males(l00%): by age, under 35 years 12 %, 36-40 years 56.3%, 41-45 years 26.3 %, and above 46 years 5.3% with 36-40 years accounting for most of it. By living location, owned houses represented 69.7%, rented houses 23.4%, monthly-rented 1.6%, the others 5.3%; by education, middle school and lower represented 3.0%, high school 89.4%, and junior college and higher 7.6% with high school occupying most of the group. By marital status, married represented 95.2%, unmarried 4.1%, and the others 0.7% with most of them married; by alcohol, drinking represented 81.8% and non-drinking 18.2%; by smoking status, smoking represented 53.6%, non-smoking 46.4% with no big difference between them. By working time(hours/week), below 50 represented 26.9%, 50-60 67.6%, above 60 5.5%; by working time(hours/day), below 9 represented 21.6%, 10-12 73.1%, above 13 5.3%; by job tenure(years), below 10 represented 25.1%, 11-15 54.3%, 16-20 15.2%, above 21 5.5%. By personal income per year, below 30 million won represented 11.0%, 30-40 84.8%, above 40 4.1%; by sleeping hours, below 6 hours represented 26.7%, 7-8 hours 69.9%, above 9 hours 3.4%. Complaint rates of musculoskeletal symptoms and work-related musculoskeletal disorder rates were 63.9% and 54.9% with shoulder area occupying most of both them. By pain degree of musculoskeletal symptoms, shoulder area represented $2.73{\pm}0.84$, lumbar area $2.66{\pm}0.86$, wrist and hand area $2.59{\pm}0.86$, neck area $2.55{\pm}0.74$, and arm and elbow area $2.48{\pm}0.71$. By cares about musculoskeletal symptoms, taking medication or care represented 34.4%-46.7%, absence or leave 15.4%-28.7%, and job transfer 6.3%-11.5%. So experienced cases more than one thing among cares about musculoskeletal symptoms represented 39.6%-54%. In the diagnosis using moire topography, pain control necessity of cervicobrachial area was shown below; A(no symptoms) 20.7%, B1(need management/light symptoms) 64.6%, B2(need management/heavy symptoms) 11.5%, C1(need treatment/light symptoms) 3.0%, C2(need treatment/heavy symptoms) 0.2%. By lumbar area, A(no symptoms) 8.7%, B1(need management/light symptoms) 52.2%, B2(need management/heavy symptoms) 30.3%, C1(need treatment/light symptoms) 8.7%, C2(need treatment/heavy symptoms) was none. In the relation between pain control necessity and general characteristics, age(P=0.013), education(P=0.000), and job tenure(P=0.012) with pain control necessity showed differences with significance. The relation between pain control necessity and complaint of musculoskeletal symptoms of cervicobrachial and lumbar area showed no difference with significance; in cervicobrachial area represented P=0.708, lumbar area P=0.318 Conclusions: This study for musculoskeletal symptoms on workers at automobile manufacturing plant showed that complaint rates of musculoskeletal symptoms for cervicobrachial and lumbar area were so high, 63.9%. But Pearson's chi-square test analysis was utilized to study the relation between musculoskeletal symptoms and the diagnosis using moire topography, showed no differences with significance. They have no differences with significance, but the prevalence rates of diagnosis using moire topography for cervicobrachial and lumbar area were more higher than complaint rates of musculoskeletal symptoms; complaint rates of musculoskeletal symptoms were 52.4%, 34.5% and the diagnosis using moire topography were 79.3%, 91.3% for cervicobrachial and lumbar area. The results of this study indicate that the diagnosis using moire topography can find weak musculoskeletal disorders that an individual can not feel, not be judged work-related musculoskeletal disease. Therefore, this study has an important meaning that diagnosis using moire topography can predict and control own physical condition complete musculoskeletal disorders beforehand, since oriental medicine theory considers that prevention is important.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.318-329
• /
• 2012

The purpose of this study was to investigate current situation of employment and factors affecting the job maintenance of women with disabilities. The second Panel Survey of Employment for the Disabled(PSED) and the third PSED are used to investigate current situation of employment and factors affecting the job maintenance of women with disabilities. We analysed whether women with disability who were employed in the second PSED maintain employment in the third PSED. The results showed that women with disabilities had lower wages(p<.001) and higher non-regular work(p<.001) than men with disabilities. Also, women with disabilities experienced more consideration of job(p<.05) and working time(p<.001) than men with disabilities. The job stability among job satisfactions of women with disabilities was higher than men with disabilities. The factors affecting the job maintenance of women with disabilities were health status(p<.05), wages(p<.05), consideration of job(p<.05).This study suggested that the health status, wages, consideration of job were needed to consider when establishing employment policy for women with disabilities.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.25-43
• /
• 2016

This research was completed to provide fundamental data regarding the guidelines to installing and managing utility facilities & structures in wetland protected area to advance the functions and sustainable use of ecology services by preserving the ecology within wetland protected area. There were 5 on-site researching areas that were used as the main subject with these areas chosen and considered from 21 inland wetlands that have been designated and are being managed from the Ministry of Environment and by their designated dates as a wetland protected area. The utility facilities in these wetland areas were categorized by their types and a detailed on-site investigation was proceeded with investigation items chosen whereas these facilities are working by their roles from their location, size, used materials, types, information contents and etc., The results showed that regarding informational structures, several locations of information boards were distanced from the main exploring routes which did not consider the visitor's eye level which had their readability dropped and by sunlight, time lapse and water penetration, many information boards were damaged or corrupted so that it was hard to confirm the information noticed or understanding an image. Insufficient observation and educational structures were installed that considered the ecological characteristics of wild animals and their living conditions. Regarding convenience facilities, there were parking lots that were installed on the fore-land and to decrease non-point solution sources, some parking lots needed to be located in protected lowlands while some facilities' shape and colors did not harmonize with their natural surroundings, creating a sense of awareness, which will need some more consideration. As for safety facilities, they were very insufficient compared to other facilities. This means that additional safety structures are needed so that related personnel can be aware of where a visitor is located when an accident occurs. Protectional facilities strongly needed new structures and a management system to cut off entrances and do surveillance so that visitors do not go into areas outside of the managed areas and bring damages to restricted locations. Research labs needed to expand the use of automatic weather systems and water gauge equipments to build fundamental data regarding floodgates that are intimated to the forming of wetlands. Sensor cameras and other types of monitoring systems are needed to monitor the majority types of animals living in the wetlands as well.

• Korean Journal of Health Education and Promotion
• /
• v.11 no.2
• /
• pp.87-106
• /
• 1994

Owing to the use of many cultural facilities, the elevation of life standards and the high level progress of industry, visual impairment was on increasing trends. Especially due to studying for many hours, the myopia of adolescents became a serious social issue. The purpose of this study was to understand adolescent's wearing glasses and eyesight condition, whether the primary myopia factor and the subjective symptoms were different between the myopia group and the normal group, between the wearing glasses group and the non-wearing glasses group, and the effect on physical, mental and study activity of myopia. The subject of investigation was 627 middle school students in Seoul and the investigation was accomplished from July 7th, 1993 to July 12th, 1993. The data were analyzed by the percentage, x²-test, t-test and ANOVA of SPSS. The results were as followed; 1. The rate of the right and left eyesights higher than 0.8 in the normal group was 47.0%, and those less than 0.7 in the myopia group was 53.0%. In the boy students, the normal group was 54.1%, the myopia group was 45.9%. In the girl students, the normal group was 39.2%, the myopia group was 60.8%. Therefore the girl students' myopia rates were higher than the boy students', and this result was significant(p<0.01). 2. The rate of wearing glasses of the middle school students was 44.6%. The rate of wearing glasses of the girl students was 56.8%. The rate of wearing glasses of the girl students was higher than that of the boy students 43.2%. The rate of necessary glasses of the middle school students was 6.1% and the rate of necessary glasses of the boy students was 7.9%, the rate of necessary glasses of the girl students was 4.1%. 3. In case of a family member of the student wear glasses, the rate of wearing glasses was higher. 4. In the myopia group, the main reason for not wearing glasses was "Uncomfortable"(63.3% in the boy students, 40% in the girl students). In case of the girl students, "Nonpermission of their parents" was 18.7% and remarkably higher than 5.1% in case of the boy students. 5. The factor of myopia was that "The bad attitude of watching TV closely" was 19.9%, that "The dimly-lit room" was 6.6%. 6. In order to protect eyesight, the rate of the students who practiced "Looking at something from afar 3∼4times a day" was 37.3%, the rate of the students who did "Eye exercise" was 17.5%, the rate of the students who took "A medicine for promoting nutrition" was 12.9%. The rate of taking the medicine was higher than 3.5% in the normal eyesight group. 7. After near working, the point of subjective symptoms was higher in the myopia group than in the normal group and in the wearing glasses group than in the unwearing group and in the girl students than in the boy students. 8. The longer time to watch TV, the higher point of subjective symptoms. The longer distance to watch TV, the lower point of subjective symptoms(p<0.05).