• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.420-426
• /
• 1998

It is the purpose of this paper to make a preliminary study on the use of repetitive control to improve velocity accuracy by eliminating repetitive disturbances caused by machining inaccuracies of the axis of rotation location. If the control system can be intelligent enough to compensate for such machining errors, then one may be able to improve the accuracy of the velocity control, or alternatively, one may maintain the same accuracy and relax the machining tolerances required. This could decrease cost significantly. Experiments are performed testing repetitive control methods on a constant speed rolling operation testbed. The experimental results show very substantial decreases in the tracking error of the system. Spectral data of the output motion are given to demonstrate the attenuation of the disturbance frequencies and harmonics, related to the bandwidth being used. It is seen that the simplest form of repetitive control which is very easily implemented, can produce striking improvement in control system performance in such belt drive rolling operations, and the learning can be accomplished in a short time.

• 한국건설관리학회논문집
• /
• 제5권5호
• /
• pp.101-108
• /
• 2004

A construction process consists of value adding activities and non-value adding activities, necessary or unnecessary. If construction personnel can eliminate inefficient and/or unnecessary activities within the process, they may have a great opportunity to improve their construction process. The Product Process Analysis (PPA) technique, which was developed in the manufacturing industry, can be applied for identifying wastes in the construction process and ultimately improving the process itself. It provides useful tools, such as a process chart worksheet and flow diagram, for mapping the flow of construction activities with predetermined standardized symbols. These tools make people understand the flow of activities more easily, identify value adding/non-value adding activities within the process, and areas where the process can be improved. The example applications of PPA are demonstrated in the paper through the case studies implemented on the construction process of structural steel. The results of case studies indicate that PPA technique was effective at identifying and removing wastes in the steel construction process. It is also found that PPA technique is more effective for improving highly repetitive construction processes.

• 동의생리병리학회지
• /
• 제22권2호
• /
• pp.333-339
• /
• 2008

Korean ginseng (Panax ginseng C. A. Meyer) has been used as an important medicinal plant in the Orient for a long time. It has been claimed that ginseng has many beneficial bioactive effects on human health, such as antitumor, antistress, antiaging and enhancing immune functions. Red ginseng possibly have new ingredients converted during steaming and dry process from fresh ginseng. Kujeungkupo method which means 9 repetitive steaming and drying process was used for the processes of green tea, Polygonatum odoratum, and Rehmanniae radix preparata. In this study, ingredient conversion of ginseng by 9 repetitive steaming and drying process were investigated measuring conversion efficiency of brown materials, crude lipids, crude proteins and aromatic compounds. Brown materials, as an antioxidant, in red ginseng were produced through non-enzymatic reaction by heat. Repetitive steaming and drying treatments on ginseng root contiunously increased the content of brown materials and the chromaticity. Crude lipids were degraded by heat and converted into volatile aromatic ingredients. Crude lipids were degraded and decreased by 0.52% after the 5th and 7th. Crude proteins were also decomposed and converted to amino acid. Crude proteins after the 9th treatment were decreased by more than 85% as increased times of treatments. A bicyclogermacrene as aromatic material was decreased as increased treatment times, while but a aromatic caramel was increased.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.185-186
• /
• 2007

• 한국멀티미디어학회논문지
• /
• 제22권4호
• /
• pp.432-442
• /
• 2019

Most current human action recognition methods based on deep learning methods. It is required, however, a very high computational cost. In this paper, we propose an action change detection method to reduce repetitive human action recognition tasks. In reality, simple actions are often repeated and it is time consuming process to apply high cost action recognition methods on repeated actions. The proposed method decides whether action has changed. The action recognition is executed only when it has detected action change. The action change detection process is as follows. First, extract the number of non-zero pixel from motion history image and generate one-dimensional time-series data. Second, detecting action change by comparison of difference between current time trend and local extremum of time-series data and threshold. Experiments on the proposed method achieved 89% balanced accuracy on action change data and 61% reduced action recognition repetition.

• Industrial Engineering and Management Systems
• /
• 제15권3호
• /
• pp.231-238
• /
• 2016

Traditional acceptance sampling plans have focused on the proportion of nonconforming items as an attribute criterion for quality. In today's modern quality management under high quality production environments, the reduction of the deviation from a target value in a quality characteristic has become the most important purpose. In consequence, various inspection plans for the purpose of reducing the deviation from the target value in the quality characteristic have been investigated. In this case, a concept of the quality loss evaluated by the deviation from the target value has been accepted as the variable evaluation criterion of quality. Further, some quality measures based on the quality loss have been devised; e.g. the process loss and the process capability index. Then, as one of inspection plans based on the quality loss, the rigorous design procedure for the variable sampling plan having desired operating characteristics (VS-OC plan) indexed by the quality loss has been proposed by Yen and Chang in 2009. By the way, since the estimator of the quality loss obeys the non-central chi-square distribution, the rigorous design procedure for the VS-OC plan indexed by the quality loss is complicated. In particular, the rigorous design procedure for the VS-OC plan requires a large number of the repetitive and complicated numerical calculation about the non-central chi-square distribution. On the other hand, an approximate design procedure for the VS-OC plan has been proposed before the proposal of the above rigorous design procedure. The approximate design procedure for the VS-OC plan has been constructed by combining Patnaik approximation relating the non-central chi-square distribution to the central chi-square distribution and Wilson-Hilferty approximation relating the central chi-square distribution to the standard normal distribution. Then, the approximate design procedure has been devised as a convenient procedure without complicated and repetitive numerical calculations. In this study, through some comparisons between the rigorous and approximate design procedures, the applicability of the approximate design procedure has been confirmed.

• 한국BIM학회 논문집
• /
• 제1권1호
• /
• pp.26-31
• /
• 2011

국내에서 BIM의 실무 활용은 건축공사 중심으로 적용되고 있다. 건축공사의 부위별 객체 특성이 정형적, 수직적, 반복적인 형태를 갖는 반면에 토목공사의 객체 특성은 비정형적, 수평적, 비반복적인 형태를 갖으므로 3D객체 구성이 어렵기 때문이다. 본 연구에서는 토목공사의 기획단계부터 설계단계까지의 업무 및 정보관리의 문제점을 파악한 후 BIM기반에서의 적용 프로세스를 제안하며, 제시한 프로세스를 기반으로 BIM시스템을 구축하여 교량공사를 대상으로 실무 적용성을 검토한다.

• 공학교육연구
• /
• 제25권6호
• /
• pp.93-102
• /
• 2022

Due to COVID-19, all activities in society are emphasized non-face-to-face, and the educational environment is changing without exception. Looking at the results of the survey after conducting non-face-to-face education, there was a lot of rejection of non-face-to-face practical education. The biggest reason was that instructors were not familiar with the non-face-to-face education method, and feedback was not smooth during or after education. In particular, software practice education was not easy to share the software development environment, but communication and feedback on class contents and tasks were important. In particular, if face-to-face and non-face-to-face are alternately variable, it is not easy for practical education to be consistently connected. Even if non-face-to-face hands-on education is changed to face-to-face hands-on education, we will present a plan to use a data sharing system such as question-and-answer, assignment, practice content, and board content so that it can proceed smoothly. This study presents an efficient software education process that can provide learners with a software integrated practice environment based on a shared server, question-and-answer between instructors and learners, and share feedback on tasks. For the verification of the presented process, the effectiveness was confirmed through the survey results by applying the face-to-face/non-face-to-face education process to 220 trainees for 30 months in software education classes such as A university hands-on education, B company new employees, and ICT education courses.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.170-176
• /
• 2002

To exchange CAD data between heterogeneous CAD systems, we generally use a neutral format especially STEP, which is the international standard (ISO-10303) for product model data exchange. AP214 (Application Protocol) for the automotive industry not only takes into account geometry and organizational data, but also provides a classification mechanism for product modeling. When reading a STEP file during a design process that is exported from other CAD systems, it is a burden to a designer to go through the tedious process of removing duplicate or non-manifold entities, adjusting parts, and rearranging text. We analyze the structure of AP214 and develop a healing tool to solve the following problem. Without the assembly information in the Master workspace of CATIA, or to read a STEP file from Pro/Engineer, a designer should do a repetitive process of disintegrating an assembly into parts one by one. We have developed a post-processing tool for STEP AP214 that separates out a part from an assembly model and adjusts superfluous or useless entities using the ACIS kernel.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.229-244
• /
• 2019

Weak form integral equations are developed to investigate the flapwise bending vibration of the rotating beams. Rayleigh and Eringen nonlocal elasticity theories are used to investigate the rotatory inertia and Size-dependency effects on the flapwise bending vibration of the rotating cantilever beams, respectively. Through repetitive integrations, the governing partial differential equations are converted into weak form integral equations. The novelty of the presented approach is the approximation of the mode shape function by a power series which converts the equations into solvable one. Substitution of the power series into weak form integral equations results in a system of linear algebraic equations. The natural frequencies are determined by calculation of the non-trivial solution for resulting system of equations. Accuracy of the proposed method is verified through several numerical examples, in which the influence of the geometry properties, rotatory inertia, rotational speed, taper ratio and size-dependency are investigated on the natural frequencies of the rotating beam. Application of the weak form integral equations has made the solution simpler and shorter in the mathematical process. Presented relations can be used to obtain a close-form solution for quick calculation of the first five natural frequencies of the beams with flapwise vibration and non-local effects. The analysis results are compared with those obtained from other available published references.