• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.2
• /
• pp.53-62
• /
• 2020

This study is to evaluate the accuracy of the meteorological information provided for the aircraft operating at low altitude. At first, it is necessary to identify crucial elements of weather information closely related to flight safety during low altitude flights. The study conducted a survey of pilots of low altitude aircraft, divided into pre-flight and in-flight phases, and reached an opinion that wind direction, wind speed, cloud coverage and ceiling and visibility are important items. Related to these items, we compared and calculated the accuracy of TAFs and METARs from Taean Airfield, Seosan Airport and Gunsan Airport because of their high number of domestic low-altitude flights. Accuracy analysis evaluated the accuracy of two numerical variables, Mean Absolute Error(MAE) and Root Mean Square Error(RMSE), and the cloud coverage which is categorical variable was calculated and compared by accuracy. For numeric variables, one-way ANOVA, which is a parameter-test, was approached to identify differences between actual forecast values and observations based on absolute errors for each item derived from the results of MAE and RMSE accuracy analyses. To determine the satisfaction of both normality assumptions and equivalence variability assumptions, the Shapiro-Wilk test was performed to verify that they do not have a normality distribution for numerical variables, and for the non-parametric test, Kruscal-Wallis test was conducted to determine whether or not they are satisfied.

• The Korean Journal of Applied Statistics
• /
• v.27 no.6
• /
• pp.1039-1047
• /
• 2014

An autoregressive model with normal errors is a natural model that attempts to fit time series data. More flexible models that include normal distribution as a special case are necessary because they can cover normality to non-normality models. The skewed exponential power distribution is a possible candidate for autoregressive models errors that may have tails lighter(platykurtic) or heavier(leptokurtic) than normal and skewness; in addition, the use of skewed exponential power distribution can reduce the influence of outliers and consequently increases the robustness of the analysis. We use SIR algorithm and grid method for an efficient Bayesian estimation.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.3
• /
• pp.299-311
• /
• 2003

This paper presents a finite element procedure to estimate the ultimate strength of space frames considering spread of plasticity. The improved displacement field is introduced based on the inclusion of second-order terms of finite rotations. All the non-linear terms due to bending moment, torsional moment, and axial force are precisely considered. The concept of plastic hinges is introduced and the incremental load/displacement method is applied for elasto-plastic analyses. The initial yield surface is defined based on the residual stress, and the full plastification surface is considered under the combined action of axial forces, bending and torsional moments. The elasto-plastic stiffness matrices are derived using the flow rule and the normality condition of the limit function. Finite element solutions for the ultimate strength of space frames are compared with available solutions and experimental results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.154-154
• /
• 2022

The frequency of natural disasters, including floods and drought events, driven by climate change has increased in recent times. Investigating the climate regimes and the roles of climate variables are indispensable to forestall future climate change-related disasters. This study compares the variability of two popular and widely used climate indices i.e., the United Nations Environment Programme (UNEP) aridity index and the Modified De-Martonne (MDM) index to assess the trend of climate change in the Chungcheong provinces of South Korea. The trend of annual and monthly climate indices was conducted using a non-parametric Mann-Kendall test and Kolmogorov-Smirnov normality test with daily climate data of 48 years (1978-2020) from 10 synoptic stations. The findings indicate that UNEP and MDM indices had a wet climate regime for the annual trend, with the UNEP index indicating a relatively humid trend of 60% humid, 20% semi-arid, and 10% sub-humid for the 48-years study period. However, the MDM index showed a high frequency of a severe wet climatic condition followed by the semi-arid condition. The months of July and August had the highest occurring frequency of the wet climatic condition (90%) for both UNEP and MDM indices. Comparing the two provinces, Chungnam showed a relatively wetter climatic condition using the UNEP index, while the MDM index indicated no significant regional difference in climate regime between the two provinces. The Kolmogorov-Smirnov normality test showed that all the 10 stations are normally distributed for monthly climate conditions at a 5% significant level in the two provinces except five stations for UNEP index and four stations for MDM index in the month of January.

• Journal of Korean Medicine Rehabilitation
• /
• v.31 no.4
• /
• pp.157-166
• /
• 2021

Objectives This study is designed to evaluate the safety of Bojungikgi-tang soft extract in healthy male volunteers. Methods 12 healthy male volunteers were recruited and this study was carried out by a single center. Laboratory test results, vital signs of the volunteers were collected to evaluate safety. According to registration order, the 12 subjects were allocated by serial number. To evaluate safety, blood samples were taken and vital signs were checked 4 times - screening, pre administration, post administration and follow up-during the whole trial. The difference between pre (before medication [0 hr]) and post-administration (after medication [48 hr]) variables was summarized as mean±standard deviation. The normality test was performed using the Kolmogorov-Smirnov test and Shapiro-Wilk test. When the normality is satisfied, the paired t-test is applied. Otherwise, the non-parametric method, Wilcoxon signed rank test is applied. The significance level was p<0.05. The incidence of all adverse effects are shown in percentage. Results In the case of red blood cell, hemoglobin, hematocrit, lymphocytes, neutrophils, protein, γ-glutamyl transpeptidase values, the normality test result of the variable for the difference value before and after the dosing has a significance level <0.05. But most of values did not deviate from the normal range, and the deviation from the normal range could not be regarded as the significance associated with this clinical trial. And adverse event wasn't observed associated with the clinical trial drug. Conclusions Bojungikgi-tang soft extract were considered to be safe for healthy male volunteers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.156-170
• /
• 2023

Objectives: This study conducted practical training to improve the proper usage of personal protective equipment(PPE), which greatly impacts workplace safety and health management. Personal protective equipment education was conducted through active participation, without theoretical modules, and aimed to identify the effects of repeated practical education and determine ways to increase participant satisfaction. Methods: Study data were analyzed using the IBM SPSS Statistics ver.29 software. First, participants' general characteristics were analyzed with frequency analysis. Second, the normality and equality of variances (Leven's test) were tested for the dependent variables prior to statistical analyses to determine the use of parametric tests. In general, normality is assumed when the sample size is 30 or more per the central limit theorem (Park et al., 2014). As our sample size of health management workers was 43, normality can be assumed. However, to ensure rigor of the study, we examined skewness and kurtosis. The results confirmed that the data were normally distributed. Third, the effects of repeated PPE training were analyzed using paired t-tests. Fourth, differences in satisfaction with PPE training according to the safety and health job position and safety and health certification were analyzed with t-test and Welch's t-test. For parameters that did not meet the assumption of equal variances, the Welch's t-test was performed. Results: Repeated PPE training improved the educational outcomes, and the improvements were significant in the 1st and 2nd respiratory PPE and safety and hygiene PPE training evaluations (p<.001). In terms of safety and health job position, repeated training led to improvements in educational outcomes, with significant improvements observed among supervisors and specialized health management institution workers in the 1st and 2nd training evaluations (p<.005). In terms of safety certification, repeated training led to improvements in educational outcomes, with significant improvements observed among both certified and non-certified individuals (p<.005). Regarding satisfaction with PPE training according to safety and health job positions, specialized health management institution workers showed greater satisfaction than supervisors, with significant differences in the satisfaction for expertise of lecture, work relevance, and lecturer's attitude (p<.001). Regarding satisfaction with PPE training according to safety and health certification, satisfaction was higher among certified individuals, with significant differences in satisfaction for work relevance and lecture attitude (p<.05) Conclusions: PPE education should be recommended to be provided as practical training. Repeated training can enhance educational outcomes for individuals with inadequate knowledge and understanding of PPE prior to education. For individuals with high levels of pre-existing knowledge and understanding of PPE, the results show that various training experiences should be provided to enhance their satisfaction. Therefore, it suggests that the workplace should actively seek educational media and methods to acquire expertise and skills in wearing personal protective equipment and improve the ability to use

• Journal of the Korean Statistical Society
• /
• v.5 no.2
• /
• pp.91-100
• /
• 1976

The use of the statistic $t = \sqrt{n} (x-\mu)/S$, where $\bar{X) = \sum X_i/n, \mu = E(X_i), S^2 = \sum(X_i-\bar{X})^2/(n-1)$ in statistical inference is usually done under the assumption of normality of the population. If the population is not normally distributed the tabulated values of student t are no longer valid. The moments of t are obtained as a power series in $1/\sqar{n}$ whose coefficients are functions of the cumulants of X. The cumulants are obtained from the moments in the usual manner. The first eight cumulants of t are given up to terms of order $1/n^3$. The first eight cumulants of t are given up to terms of order $1/n^3$. These results extend those of Geary who gave the first six cumulants of t to order $1/n^2$.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.310-314
• /
• 2010

Track geometry changes by traffic loads. The bigger the changes are, the worse the riding comfort and running stability of train. This is so-called track irregularity and is the most important quality parameters of ballasted track. To objectively assess track irregularity, track geometry should be able to be measured. Practically, railway companies in Korea use normal distribution as probability distribution of track irregularity. But some countries use non-normal distribution according to their own track recording system. In this report, reviewed probability distribution of Kyung-Bu high-speed line and tested normality.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.347-356
• /
• 1998

For assessing the capability of a process, the quantification of process location and variation is central to understanding the quality of units produced from the manufacturing process. Conventional process capability indices is insufficient to drive out the information for process condition, furthermore it is very difficult to evaluate the process capability accurately when the target value is not consistent with the center of specification, and/or the shape of distribution is changed, but the process incapability indices is enable to provide more detailed information to evaluate the process capability by dividing information about the process mean and variance. In this paper, we have a brief review and comparison about these indices, provide an understanding of the relationships between the process capability indices and the incapability indices. And we explore the strengths and weakness of these indices as they apply to normally distributed process, and to examine the effect that non-normality has on these indices.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.347-354
• /
• 1999

Statistical Process Control(SPC) which uses control charts is widely used to inspect and improve manufacturing process as a effective method. A parametric method is the most common in statistical process control. Shewhart chart was made under the assumption that measurements are independent and normal distribution. In practice, this assumption is often excluded, for example, in case of (equation omitted) chart, when the subgroup sample is small or correlation, it happens that measured data have bias or rejection of the normality test. A bootstrap method can be used in such a situation, which is calculated by resampling procedure without pre-distribution assumption. In this study, applying bootstrap percentile method to (equation omitted) chart, it is compared and evaluated standard process control limit with bootstrap percentile control limit. Also, under the normal and non-normal distributions, where parameter is 0.5, using computer simulation, it is compared standard parametric with bootstrap method which is used to decide process control limits in process quality.