• 대한수학회보
• /
• 제54권2호
• /
• pp.383-389
• /
• 2017

This paper devotes to the study of a diffusive model for unstirred membrane reactors with maintenance energy subject to a homogeneous Neumann boundary condition. It shows that the unique constant steady state is globally asymptotically stable when it exists. This result further implies the non-existence of the non-uniform steady state solution.

• 태양에너지
• /
• 제20권1호
• /
• pp.81-89
• /
• 2000

In the present study, the characteristics of conductive and convective heat transfer occurred in a circular absorber of PTC (parabolic trough concentrator) for medium temperature solar energy utility were numerically investigated. A circular tube was considered as an absorber and the shape of PTC modeled in this study was based on the system that was installed in Korea Institute of Energy Research. Not only convection inside the tube but also conduction through the wall of the tube were analyzed, simultaneously. Circumferentially non-uniform heat flux that was simulated from the non-uniform solar disc model proposed by Jose was applied as thermal boundary condition on the tube surface. And, hydrodynamically fully developed laminar velocity profile was used as the inlet boundary condition and it was assumed that the working fluid was water. And, local heat fluxes at the interface of the tube and the working fluid were calculated for different wall thickness and thermal conductivity of the tube at various Reynolds number. Based on the results, the effects of thermal conduction of the tube on the local heat transfer were investigated.

• 한국수자원학회논문집
• /
• 제54권12호
• /
• pp.1275-1284
• /
• 2021

본 논문에서는 기계학습을 이용하여 비점성토 및 점성토 지반에서 시간에 따른 교각주위 국부세굴을 예측하였다. 기계학습 기법으로는 과적합 오차를 유발하지 않는다고 알려진 Support Vector Machines (SVM) 기법이 사용되었다. 비점성토 지반 및 점성토 지반에서 시간에 따라 발달하는 세굴심을 7개 및 9개의 변수를 각각 이용하여 표현하였다. 여러 실험을 통해 얻어진 시계열 자료를 이용하여 개발된 모형을 학습시키고 검증하였다. 계산된 평균절대비오차(MAPE)에 의하면 모형의 학습과 검증이 적절하게 수행된 것으로 나타났다. 실험 결과뿐 아니라 Choi and Cho 공식과 Briaud et al.이 제시한 SRICOS 방법에 의한 결과와 비교하였다. 본 연구를 통해 양질의 자료가 충분히 제공되는 경우 SVM 모형이 비점성토 및 점성토 지반 시간의존 국부세굴을 예측할 수 있음을 보여주었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.137-141
• /
• 1996

This paper deals with the prebreakdown phenomena of $SF_{6}$ gap stressed by non-oscillating and oscillating impulse voltages in a strong inhomogeneous field disturbed by a fred needle shaped-protrusion on the earth-side electrode. The breakdown voltage-time characteristics were measured for both positive and negative polarities and over the gas pressure range of 0.1∼0.5 MPa, and the temporal developments of the 77breakdown were observed by a shunt of 50 n. The dependence of the leader stopping time on the gas pressure were obtained. The local field enhancement due to the space charges, which is produced by the streamer corona, has influence with the electrical breakdown of the test gap. The test streamer corona is oxy a necessary condition for the electrical breakdown and the subsequent ionization activities launch the leader at the local field region.

• Structural Engineering and Mechanics
• /
• 제12권5호
• /
• pp.507-526
• /
• 2001

In standard finite element algorithms, the local stability conditions are not accounted for in the formulation of the tangent stiffness matrix. As a result, the loss of the local stability is not adequately related to the onset of the global instability. The phenomenon typically arises with material-type localizations, such as shear bands and plastic hinges. This paper addresses the problem in the context of the planar, finite-strain, rate-independent, materially non-linear beam theory, although the proposed technology is in principle not limited to beam structures. A weak formulation of Reissner's finite-strain beam theory is first presented, where the pseudocurvature of the deformed axis is the only unknown function. We further derive the local stability conditions for the large deformation case, and suggest various possible combinations of the interpolation and numerical integration schemes that trigger the simultaneous loss of the local and global instabilities of a statically determined beam. For practical applications, we advice on a procedure that uses a special numerical integration rule, where interpolation nodes and integration points are equal in number, but not in locations, except for the point of the local instability, where the interpolation node and the integration point coalesce. Provided that the point of instability is an end-point of the beam-a condition often met in engineering practice-the procedure simplifies substantially; one of such algorithms uses the combination of the Lagrangian interpolation and Lobatto's integration. The present paper uses the Galerkin finite element discretization, but a conceptually similar technology could be extended to other discretization methods.

• Tuberculosis and Respiratory Diseases
• /
• 제70권1호
• /
• pp.51-57
• /
• 2011

Background: Early recognition and treatment of sepsis would improve patients' outcome. But it is difficult to distinguish between sepsis and non-infectious conditions in the acute phase of clinical deterioration. We studied serum level of procalcitonin (PCT) as a method to diagnose and to evaluate sepsis. Methods: Between 1 March 2009 and 30 September 2009, 178 patients had their serum PCT tested during their clinical deterioration in the medical intensive care unit. These laboratories were evaluated, on a retrospective basis. We classified their clinical status as non-infection, local infection, sepsis, severe sepsis, and septic shock. Then, we compared their clinical status with level of PCT. Results: The number of clinical status is as follows: 18 non-infection, 33 local infection, 39 sepsis, 26 severe sepsis, and 62 septic shock patients. PCT level of non-septic group (non-infection and local infection) and septic group (sepsis, severe sepsis, septic shock) was $0.36{\pm}0.57$ ng/mL and $18.09{\pm}36.53$ ng/mL (p<0.001), respectively. Area under the curve for diagnosis of sepsis using cut-off value of PCT >0.5 ng/mL was 0.841 (p<0.001). Level of PCT as clinical status was statistically different between severe sepsis and septic shock ($^*severe$ sepsis; $4.53{\pm}6.15$ ng/mL, $^*septic$ shock $34.26{\pm}47.10$ ng/mL, $^*p$ <0.001). Conclusion: Level of PCT at clinical deterioration showed diagnostic power for septic condition. The level of PCT was statistically different between severe sepsis and septic shock.

• 한국컴퓨터정보학회논문지
• /
• 제11권5호
• /
• pp.1-8
• /
• 2006

효율적인 네트워크 운용을 위해 트레픽를 측정하는 일은 중요하다. 흔히 용량(capacity)은 트레픽 부하가 없을 때 경로가 제공할 수 있는 최대처리량 또는 경로상의 모든 링크 간의 최소 전송율로서 정의된다. Pathrate는 현재 가장 널리 사용되는 네트워크 용량 측정 도구 중의 하나로써 네트워크의 일시적인 부하에 관계없이 정확한 측정을 할 수 있고 수년간의 개발과 보완으로 성능도 안정되어 있다. Pathrate에서의 Local Mode 검출에는 통계적 방법이 사용되는데 본 논문에서는 ASH(Averaged Shifted Histogram)을 이용한 Local Mode 검출 알고리즘을 제시하고, 구현을 통해 기존의 방법보다 더 나은 결과를 얻었음을 보였다.

• 생물환경조절학회지
• /
• 제20권2호
• /
• pp.150-155
• /
• 2011

캐나다까지 장거리 수출조건은 선적 후 통관까지 20일 동안은 $7{\pm}1^{\circ}C$와 90% 상대습도가 유지되었고, 이후 저장창고 이송전에 3시간만에 $13^{\circ}C$까지 상승한 후 저장창고 이송후 3일간 $3{\sim}4^{\circ}C$와 90% 상대습도를 나타내었다. 이후 상온조건의 판매소에서는 $16^{\circ}C$에 60% 이하의 상대습도를 나타내었다. 이상의 유통조건을 기초로 $7^{\circ}C$, 90% 상대습도에서 15일간 저장한 후 $20^{\circ}C$, 55% 상대습도에서 7일간 저장하는 조건에서 MA저장 실험을 실시하였다. 포장방법에는 무처리와 기존의 유공포장(6mm 직경의 구멍이 $18holes/m^2$) 그리고 레이저로 가공한 3가지 비천공 필름 (산소 투과도 5,000과 20,000 그리고 $100,000cc/m^2{\cdot}day{\cdot}atm$)로 하였다. 저장 중 생체중 감소는 3가지에서는 1% 이하였으나, 유공처리과 무처리는 4% 이상으로 품질 저하가 나타났다. 상온으로 이동한 저장 15일 후 포장재내 대기조성이 $5,000cc/m^2{\cdot}day{\cdot}atm$비천공필름처리는 산소 5%, 이산화탄소 15%를 나타내었고, $20,000cc/m^2{\cdot}day{\cdot}atm$ 비천공필름처리는 산소 16%, 이산화탄소 4~5%를 나타내어, 이들처리에서는 이산화탄소 농도가 파프리카의 적정 범위를 상회하였다. 포장재내 에틸렌 농도는 처리간 큰차이가 없었다. 저장 중 외관상 품질은 이산화탄소 농도가 적절하게 유지되었던 $100,000cc/m^2{\cdot}day{\cdot}atm$ 비천공필름처리에서 가장 높게 유지되었으며, 경도와 당도는 비천공 필름간 차이에 통계적 유의성은 없었다. 이상의 결과로 보아 20일 이상의 장기 유통 중 판매가 상온에서 이루어질 경우 포장내 이산화탄소 농도가 3% 이하로 유지될 수 있는 $100,000cc/m^2{\cdot}day{\cdot}atm$의 통기성을 가장 포장재가 파프리카 MAP에 적합하다고 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제16권1호
• /
• pp.226-235
• /
• 1991

Therapeutic use of antibiotics in the pulpal disease should reduce the clinical symptoms and pathogenic microflora in the pulp. The purpose of this study was focused on local drug delivery into the root canal in endodontic therapy. Monolithic films from polycaprolactone and polyethylene glycol preparations with minocycline were prepared, and then the antimicrobial effect of these films on necrotic canal was tested. A total 17 necrotized pulp teeth were sampled before and 1 week after insertion of film into the pulp. Bacterial culture were performed with anaerobical condition and seeded in the 5 selective and non - selective media for 7 days in $37^{\circ}C$ of anaerobic chamber. Bacterial identification were performed with Gram staining, biochemical test, and API kit There was significantly decreased of anaerobic and aerobic microflora of 13 among 17 patients after therapy. Among the identified microflora, Streptococcus species, black - pigmented species and Fusobacterium species were significantly reduced 1 week after treatment with local delivery antibiotics. Furthermore, clinical symptoms included in pain and local swelling were continuousely reduced after therapy. These results suggest that local drug delivery with minocycline is effeicient to treat the endodontic involved teeth for releasing clinical symptoms and microbiological shifting.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.534-537
• /
• 2005

Free Vibration Analysis using Non-dimensional Dynamic Influence Function (NDIF) is extended to arbitrarily shaped plates including polygonal plates. Since the corners of polygonal plates have indefinite normal directions and additional boundary conditions related to a twisting moment at a corner along with moment and shear force zero conditions, it is not easy to apply the NDIF method to polygonal plates wi th the free boundary condition. Moreover, owing to the fact that the local polar coordinate system, which has been introduced for free plates with smoothly varying edges, cannot be employed for the straight edges of the polygonal plates, a new coordinate system is required for the polygonal plates. These problems are solved by developing the new method of modifying a corner into a circular arc and setting the normal direction at the corner to an average value of normal direct ions of two edges adjacent to the corner. Some case studies for plates with various shapes show that the proposed method gives credible natural frequencies and mode shapes for various polygons that agree well with those by an exact method or FEM (ANSYS).