• Korean Journal of Food Science and Technology
• /
• v.19 no.1
• /
• pp.61-65
• /
• 1987

The milk protein portion contains sialic acid which may be used as an index for k-casein. In comparison with non fat dry milk (NFDM) and calcium caseinate, the solubility of NFDM protein isolates at the various pH was inferior. Another consideration for the low solubility relates to the possibility that k-casein may have been extracted or possibly modified by the action of alcohol. The k-casein is the principal stabilizing fraction for casein micelle and any changes which result in its destruction or removal would be expected to have potent results. During solvent treatment, 16.5% of sialic acid was extracted in the first extraction solvent, whereas the second treatment caused only a 4.0% loss, based on sialic acid analysis. A study was conducted on the effect of concentration of methanol on loss of sialic acid. The loss of sialic acid decreased as the concentration of methanol increased to above 62% in both the first and second extracted solvent. It appears that loss of sialic acid is attributed to the water fraction rather than the methanol fraction. The effect of addition of the dried extracted solids on solubility was investigated. Protein solubility of NFDM protein isolates was sharply increased by 10% addition of the extracted solids and, thereafter, decreased. Efforts to restore solubility by feeding-back the extracted material supported the concept that removal of surface k-casein may have been a possible factor.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.3
• /
• pp.1-18
• /
• 2018

In Korea, 64% of the land is known as mountain area, but the definition and classification standard of mountain are not clear. Demand for utilization and development of mountain area is increasing. In this situation, the unclear definition and scope of the mountain area can lead to the destruction of the mountain and the increase of disasters due to indiscreet permission of forestland use conversion. Therefore, this study analyzed the variables and criteria that can extract the mountain boundaries through the questionnaire survey and the terrain analysis. We developed a mountain boundary extraction algorithm that can classify topographic mountain by using selected variables. As a result, 72.1% of the total land was analyzed as mountain area. For the three catchment areas with different mountain area ratio, we compared the results with the existing data such as forestland map and cadastral map. We confirmed the differences in boundary and distribution of mountain. In a catchment area with predominantly mountainous area, the algorithmbased mountain classification results were judged to be wider than the mountain or forest of the two maps. On the other hand, in the basin where the non-mountainous region predominated, algorithm-based results yielded a lower mountain area ratio than the other two maps. In the two maps, we was able to confirm the distribution of fragmented mountains. However, these areas were classified as non-mountain areas in algorithm-based results. We concluded that this result occurred because of the algorithm, so it is necessary to refine and elaborate the algorithm afterward. Nevertheless, this algorithm can analyze the topographic variables and the optimal value by watershed that can distinguish the mountain area. The results of this study are significant in that the mountain boundaries were extracted considering the characteristics of different mountain topography by region. This study will help establish policies for stable mountain management.

• Journal of the Korean Orthopaedic Association
• /
• v.52 no.1
• /
• pp.73-82
• /
• 2017

Purpose: To assess the chronological changes of disease-related kyphosis after chemotherapy alone. Materials and Methods: A total of 101 children aged 2 to 15 years with spinal tuberculosis, accompanied by various stages of disease processes were enrolled for analysis. By utilizing the images in them, the growth plate condition and chronological changes of kyphosis after chemotherapy were analyzed at two points in time; the first assessment was at post-chemotherapy one-year and second at the final discharge. Results: Complete disc destruction in the cervical, dorsal and lumbosacral spines was observed in 2 out of 40 children (5.0%), 8 out of 30 children (26.7%), and 6 out of 31 children (19.4%), respectively. In those cases, the residual kyphosis inevitably developed. In the remaining children, the discs were intact or partially damaged. Among the 101 children kyphotic deformity was maintained without change in 20 children (19.8%). Kyphosis decreased in 14 children (13.9%), while it increased in 67 children (66.3%) with non-recoverably damaged growth plate. Conclusion: Although it is tentatively possible to predict the deformity progress or non-progress and spontaneous correction at the time of the initial treatment, its predictive accuracy is low. Therefore, assessment of the chronological changes should be performed at the end of chemotherapy. In children with progressive curve change, assessment of deformity should be continued until maturity.

• Journal of dental hygiene science
• /
• v.11 no.4
• /
• pp.339-344
• /
• 2011

Matrix metalloproteinase(MMP)-9 is considered important in tissue destruction in periodontitis. The aim of this study was to investigate the influence of smoking on MMP-9 in the gingival crevicular fluid(GCF). GCF samples in upper incisors area from 332 male subjects were collected after the informed consent. The dental examination included the assessment of oral hygiene, gingival inflammation and probing pocket depth. A quantitative assessment of MMP-9 levels in GCF was performed utilizing and immunological procedure. The mean MMP-9 concentrations found in GCF of smokers(30.86 ng/ml) and quit-smokers(29.82 ng/ml) differed from non-smokers(11.33 ng/ml), adjusted by age, gingival index and Community periodontal index(p<0.001). Smoking seems to influence MMP-9 in GCF regardless of gingival inflammation and age. It means smoking can destruct the periodontal tissue for itself.

• Journal of Acupuncture Research
• /
• v.33 no.2
• /
• pp.21-34
• /
• 2016

Objectives : The aim of the present study is to examine the effect and mechanism of Erycibae Caulis and Corydalis Tuber Pharmacopuncture (ECP) on a mouse model with collagen induced rheumatoid arthritis (CIA). Methods : We evaluated the Aspartate aminotransferase (AST), Alanine aminotransferase (ALT), Creatinine, and the Blood urea nitrogen (BUN) of serum to examine the safety of this study. In vivo, we compared the results of the non-treated group, the normal saline pharmacopuncture treated control group, the indomethacin treated group and the ECP group. We evaluated rheumatoid arthritis manifestation and the Rheumatoid Arthritis Index (AI). Also, immune cells in blood affected by ECP were evaluated by calculating the level of white blood cells (WBC), neutrophil, lympocytes and monocytes. Next, the level of Immunoglobulin M (IgM), Immunoglobulin G (IgG), Interleukin (IL)-$1{\beta}$, IL-6, IL-17, Tumor Necrosis Factor (TNF)-${\alpha}$ and Granulocyte-macrophage Stimulating Factor (GM-CSF)in serum were measured. We examined the imaging of cartilage degeneration using micro CT-arthrography of the hind paw. Additionally, we examined the effects of reducing bone volume (BV) ratio and bone surface/bone volume (BS/BV) ratio with 3D Micro-CT. Finally, we did a histopathologic examination analysis. Results : The absence of liver and kidney toxicity was evident. In vivo, edema of the joints of the ECP group decreased greatly in macroscopic observation. AI measurement of the ECP group also decreased significantly compared to the control group. The level of WBC, neutrophil, lympocytes, and monocytes in the blood decreased but there was no statistical significance of this data. IgM of the ECP group decreased significantly compared to the control group. IL-$1{\beta}$, IL-6, TNF-${\alpha}$, and GM-CSF production of the ECP group decreased significantly compared to the control group. As a result of examining joint condition with 3D micro CT, deformation and destruction of the joint was shown to have decreased. Bone density of ECP group increased at a statistically significant level compared to the control group. Degree of joint inflammation of ECP group decreased significantly compared to the control group. After H&E and M-T staining, infiltration of immune cells, subsidence of the cartilage, damage to the synovial cells and joint erosion decreased. Conclusion : This study showed that ECP hindered the process of rheumatoid arthritis and protected joints and cartilage.

• Journal of the Korea Concrete Institute
• /
• v.27 no.5
• /
• pp.481-488
• /
• 2015

The purpose of this study is to provide analytical method to reasonably predict the overall behavior up to destruction of reinforced concrete panel specimens using high-strength reinforcing bar. A total of 12 specimens of reinforced concrete panels with a wall thickness one-third the size of the actual nuclear containment structures under various loading conditions and design parameters were selected and the analysis was performed using a non-linear finite element analysis program (RCAHEST) was developed by the authors. The mean and coefficient of variation for shear strength at cracking point and maximum shear strength from the experiment and analysis results was predicted 1.03 and 12%, 0.97 and 9%, respectively. For the shear strain at the maximum shear strength from the experiment and analysis results was predicted 0.96 and 30%, respectively. Based on the results, the analysis program that was applied newly modified constitutive equation in this study is judged as having a relatively high reliability for the analysis results.

• Journal of Food Hygiene and Safety
• /
• v.28 no.3
• /
• pp.195-201
• /
• 2013

In atherosclerosis, blood vessels become sensitive to vessel-constricting agents leading to reduced control in the event of abrupt blood pressure changes. Mulberry trees (Morus alba L., MA) have been claimed to contain various bioactive principles that could possibly prevent atherosclerosis development caused by high cholesterol consumption. In order to examine whether MA feeding can prevent the sensitization of blood vessels, MA leaves were fed to rats for 8 weeks and pressor responses to vasoconstricting agents were assessed. Animals were pithed before blood pressure assessments to eliminate reflex compensation in vessel responses. Feeding diets containing high levels of cholesterol led to potentiated pressor responses to sympathetic nerve stimulation, or to injection of norepinephrine, phenylephrine, angiotensin II and vasopressin in pithed rats. These potentiated pressor responses were prevented in rats fed MA leaf-containing diets at 2 or 10% levels. It was also examined in anesthetized non-pithed rats whether similar cholestrol-related sensitization and MA prevention could be observed. However, high cholesterol-induced sensitization in pressor responses were not observed, suggesting that destruction of central cardiovascular control by pithing must have revealed the sensitization responses. It was concluded that MA leaves seem to be active in preventing abnormal blood vessel reactivity caused by hypercholesterolemia.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.4
• /
• pp.268-275
• /
• 2012

This study was carried out to understand the anatomical characteristics of Korean mistletoe (Viscum album var. coloratum) and host tree of Mongolian oak (Quercus mongolica) by the aid of light and scanning electron microscopy. The branch diameter of host tree at the parasitic part by mistletoe is larger than that of non-parasitic part. In the mistletoe, phloem consists of bast fiber and parenchyma cell and xylem is composed of fiber, ray and axial parenchyma cell, and vascular tracheid. The volume of ray parenchyma cell is higher than common wood species and is heterocellular made up of procumbent, upright, and square cells in the mistletoe. In the vascular tracheid of mistletoe, coarse spiral thickenings and bordered pit are present. Due to the insertion of the mistletoe haustorium, some deformed vessels but no tylosis are observed in the mistletoe. The shapes of mistletoe haustorium are sharp, and the destruction of the host tree cells due to the insertion of the mistletoe haustorium are not identified.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.47-55
• /
• 2017

The technology for hydrothermal reaction of organic waste is one of the promising process to improve energy efficiency of biomass waste recycling system since moisture contents of treated biomass could be reduced at 40% or less than by dehydration processes. For these reasons, many parts of the world are interested in hydrothermal reaction of organic waste. In this paper, drying performances were evaluated with and without hydrothermal reaction of organic wastes which are sewage sludge and food wastes. For the hydrothermal reaction, organic wastes were treated at $200^{\circ}C$ for 1hr. Drying time of treated organic waste by hydrothermal reaction was reduced. In case of food waste drying at $100^{\circ}C$, drying time of treated wasted was reduced more 52.9% than non-treated. Hence, drying performances of sewage sludge and food wastes should be improved by hydrothermal reaction. Drying rates of treated wastes were considerably increased at preheat period of drying characteristic curve as followings; at $80^{\circ}C$ sludge as 148%, $100^{\circ}C$ sewage sludge as 151%, $80^{\circ}C$ food waste as 209%, $100^{\circ}C$ food waste as 366%. It means the surface area of treated wastes could be increased with destruction of cell membrane by hydrothermal reaction. However, the designer and operator of drying process should be careful, since enhanced drying rate cause the extension the decreasing drying period.

• Computers and Concrete
• /
• v.22 no.3
• /
• pp.337-353
• /
• 2018

The present study focuses on examining the structural behaviour of steel-fibre-reinforced concrete (SFRC) beams under high rates of loading largely associated with impact problems. Fibres are added to the concrete mix to enhance ductility and energy absorption, which is important for impact-resistant design. A simple, yet practical non-linear finite-element analysis (NLFEA) model was used in the present study. Experimental static and impact tests were also carried out on beams spanning 1.3 meter with weights dropped from heights of 1.5 m and 2.5 m, respectively. The numerical model realistically describes the fully-brittle tensile behaviour of plain concrete as well as the contribution of steel fibres to the post-cracking response (the latter was allowed for by conveniently adjusting the constitutive relations for plain concrete, mainly in uniaxial tension). Suitable material relations (describing compression, tension and shear) were selected for SFRC and incorporated into ABAQUS software Brittle Cracking concrete model. A more complex model (i.e., the Damaged Plasticity concrete model in ABAQUS) was also considered and it was found that the seemingly simple (but fundamental) Brittle Cracking model yielded reliable results. Published data obtained from drop-weight experimental tests on RC and SFRC beams indicates that there is an increase in the maximum load recorded (compared to the corresponding static one) and a reduction in the portion of the beam span reacting to the impact load. However, there is considerable scatter and the specimens were often tested to complete destruction and thus yielding post-failure characteristics of little design value and making it difficult to pinpoint the actual load-carrying capacity and identify the associated true ultimate limit state (ULS). To address this, dynamic NLFEA was employed and the impact load applied was reduced gradually and applied in pulses to pinpoint the actual failure point. Different case studies were considered covering impact loading responses at both the material and structural levels as well as comparisons between RC and SFRC specimens. Steel fibres were found to increase the load-carrying capacity and deformability by offering better control over the cracking process concrete undergoes and allowing the impact energy to be absorbed more effectively compared to conventional RC members. This is useful for impact-resistant design of SFRC beams.