• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.212-213
• /
• 2021

As structure and the waterproofing material are compressed through the backfilling process after the waterproofing material is installed on the underground structure at the actual site, there is a difference between the behavioral response force of the waterproofing material in the compressed state and the behavioral response force in the non-constrained state. In this regard, we will analyze the limitations of the current structural behavioral response evaluation and suggest an improvement plan so that the future test and evaluation environment can be evaluated under conditions similar to the field.

• ETRI Journal
• /
• v.24 no.3
• /
• pp.239-246
• /
• 2002

We investigate an alternative blind adaptive multiuser detection scheme based on a non-canonical linearly constrained constant modulus (LCCM) criterion and prove that, under the constrained condition, the non-canonical linearly constrained constant modulus algorithm (LCCMA) can completely remove multiple -access interference. We further demonstrate that the non-canonical LCCM criterion function is strictly convex in the noise-free state, and that under the constrained condition, it is also strictly convex even where small noise is present. We present a simple method for selecting the constant as well as a stochastic gradient algorithm for implementing our scheme. Numerical simulation results verify the scheme's efficiency.

• Journal of applied mathematics & informatics
• /
• v.18 no.1_2
• /
• pp.1-23
• /
• 2005

The decentralized static output feedback design problem is considered. A constrained trust region method is developed that solves this optimal control problem when a complete set of state variables is not available. The considered problem is interpreted as a non-linear (non-convex) constrained matrix optimization problem. Then, a decentralized constrained trust region method is developed for this problem class exploiting the diagonal structure of the problem and using inexact computations. Finally, numerical results are given for the proposed method.

• Journal of Sensor Science and Technology
• /
• v.19 no.1
• /
• pp.8-16
• /
• 2010

This research proposes measuring of BCG(ballistocardiogram) to monitor heart activities in a non-constrained environment, at home or work. Unlike with ECG, measuring BCG does not require the attachment of leads on the subject's body and allows signal measuring in a non-constrained state. It enables effective long-term monitoring of cardiac conditions. In this study a chair type BCG measurement system to continuous monitor the activity of the heart is implemented. The instrument consists of upper petal and ready for press of chair load cell sensor is attached to measure the change of the object's weight. In order to extract the output ballistic signal from the weight and force sensor signals. Beside the signal processing circuit for the digital conversion, the ballistic signal is detected using DAQ equipment. Signal processing algorithm including wavelet transforms for noise cancellation, template matching for normalization and peak detection in BCG is developed. ECG and BCG were concurrently measured to evaluate the performance of the system, and comparing the characteristics of the two signals verified the possibility of the system in non-constrained and nonconscious health monitoring.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.12
• /
• pp.129-139
• /
• 2021

The aim of this study is to provide insight into tax avoidance through planning and management, and its investment consequences in financially constrained and unconstrained firms, as well as to empirically examine the interrelationships between the variables studied. Data was extracted from the financial statement analysis of non-financial companies listed on the Pakistan stock exchange (PSX) published by the State Bank of Pakistan, covering ten major manufacturing sectors. KZ index and WW index are used to identify financially constrained and unconstrained firms. Tax avoidance is measured by using GETR and LETR. All the equations are estimated through panel data regression models using common, fixed, and random effects. The empirical investigation of the role of tax avoidance in all firms collectively and constrained and unconstrained firms separately showed that the tax avoidance behavior of these firms is translated into investments by these firms. The study will help policymakers in strategy formulation and implementation related to tax planning and investment decisions in constrained and unconstrained firms to overcome their financial constraints and to optimize their investment decisions for value maximization. This will substantially increase the investment in the country by providing growth opportunities and lowering the tax rates.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.673-676
• /
• 2000

Adaptive Fourier analysis of sinusoidal signals in noise is of essential importance in many engineering fields. So far, many adaptive algorithms have been developed for this purpose. In particular, a filter bank based algorithm called constrained notch Fourier transform of its cost-efficiency and easily controllable performance. However, its performance deteriorates when the signal frequencies are not uniformly spaced. This paper proposes, at first, a new structure for the CNFT, referred to as modified CNFT (MCNFT), to compensate the performance degeneration of the CNFT for noisy sinusoidal signals with non-uniformly spaced frequencies. Next, a detailed performance analysis for the MCNFT is conducted. Closed form expression of steady-state mean square error (MSE) for the discrete Fourier coefficients (DFCs) is derived. Extensive simulations are presented to demonstrate the improved performance of the MCNFT and the validity of the analytical results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.8
• /
• pp.776-781
• /
• 2008

In this study, ubiquitous health care system attaching in chair to monitor ECG for health care was developed at the unconsciousness state. The system conveniently and simple measured ECG at non-consciousness. We measured the contact impedance to skin-electrode of metal mesh electrodes of the system. Contact impedance enable the electrode to use for ECG measurement. The results are that the impedance of the metal mesh electrodes according to sizes is low when the size is 4$cm^2$. As the result, when the size of the metal mesh electrode is 4$cm^2$, the electrode is fit for ECG measurement. We can acquired by positing the arm on the metal mesh electrode. The ECG signal was detected using a high-input-impedance bio-amplifier, and then passed filter circuitry. The measured signal transmitted to a PC through the bluetooth wireless communication and monitored. Data of the non-constrained ECG system attaching in chair is noise-data when comparing metal mesh electrode with the Ag/Agcl electrode but the data is significant to monitor ECG for check the body state.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.702-710
• /
• 2008

In this paper, the observability of the INS/GPS integrated system for a land vehicle is analyzed on measurements and different filters with respect to the measurements are designed. In the stationary case, it is shown that horizontal accelerometer biases and vertical attitude errors and gyro biases are unobservable. An 8-state filter is designed based on the observability analysis. When GPS signal is available, a 15-state filter is used with position and velocity measurements. To estimate the INS errors even in the case that GPS signal is blocked a filter is designed in consideration of the non-holonomic constraints of a land vehicle. In this case, the horizontal position and velocity errors and vertical attitude error are unobservable. However, a 12-state filter including the velocity states is designed to estimate the accelerometer biases. When GPS signal recovers, a 9-state filter is used excluding the sensor biases. This paper presents a multi-dimensional filter that switches the four filters according to the usable measurements and maneuver environments. A simulation is carried out to verify the performance of the proposed filter.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.70-84
• /
• 2006

We propose a new distributed QoS routing scheme called pre-computation based selective probing (PCSP). The PCSP scheme is designed to provide an exact solution to the constrained optimization problem with moderate overhead, considering the practical environment where the state information available for the routing decision is not exact. It does not limit the number of probe messages, instead, employs a qualitative (or conditional) selective probing approach. It considers both the cost and QoS metrics of the least-cost and the best-QoS paths to calculate the end-to-end cost of the found feasible paths and find QoS-satisfying least-cost paths. It defines strict probing condition that excludes not only the non-feasible paths but also the non-optimal paths. It additionally pre-computes the QoS variation taking into account the impreciseness of the state information and applies two modified QoS-satisfying conditions to the selection rules. This strict probing condition and carefully designed probing approaches enable to strictly limit the set of neighbor nodes involved in the probing process, thereby reducing the message overhead without sacrificing the optimal properties. However, the PCSP scheme may suffer from high message overhead due to its conservative search process in the worst case. In order to bound such message overhead, we extend the PCSP algorithm by applying additional quantitative heuristics. Computer simulations reveal that the PCSP scheme reduces message overhead and possesses ideal success ratio with guaranteed optimal search. In addition, the quantitative extensions of the PCSP scheme turn out to bound the worst-case message overhead with slight performance degradation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.857-862
• /
• 2011

This paper studies the output consensus problem for a class of heterogeneous linear multi-agent systems under a fixed directed communication network. The dynamics, as well as its dimension, of each agent can widely differ from the others, but all the agents are assumed to have the same transfer matrix. In addition, only the system outputs are constrained to be delivered through the network. Under these conditions, we show that the output consensus is reached by a group of identical controllers, which is designed to achieve the state consensus for the homogeneous multi-agent system obtained from the minimal realization of the transfer matrix. Finally, an example is given to demonstrate the proposed result.