• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.3
• /
• pp.353-361
• /
• 1998

The study on the vibration characteristics of annular sector plates is important for structural engineers. In this study the vibration modes and their natural frequencies of annular sector plates clamped along the inner circumferential edge are obtained by the time average holographic interferometer according to the varying sector angle. The experimental results agree well with those obtained by the numerical analysis. The vibration characteristics of annular sector plates shows great dependence on the sector angle. The radial nodal lines converge to the center of annular sector plate.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.10a
• /
• pp.157-164
• /
• 1994

Finite element analysis of material deformation is successfully utilized to understand metal forming processes such as forging, extrusion and deep drawing. However, such analysis involves contact problems; a free node touches a die surface and a contact node slips along the die surface. In the present investigation, appropriate contact algorithms were developed assuming that a three dimensional surface can be divided into bilinear patches and that nodal velocities are linear during an incremental time. The algorithms were coded into a computer program and tested for a simple surface. Comparison of the test result with that obtained from a commercial code is presented and discussed.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.248-250
• /
• 2001

In this paper, marginal loss factors are calculated for 12 load cases that represent the impact of marginal network tosses on nodal prices at the transmission network connection points at which generators are located. Based on comparison analysis of marginal loss factors on generation energy resources, we can find the characteristics of each plants according to its energy resources in KOREA.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.561-568
• /
• 2001

For obtaining the time history nodal responses of reactor building, a lumped-mass beam model composed of two sticks for the reactor building and the reactor support structure is developed. The time history responses for the non-isolated and isolated reactor buildings are calculated under an artificial time history, generated using the seismic spectrum curve of US NRC RG1.60. The analysis results show that the horizontal accelerations of the isolated building are dramatically decreased to one-tenths of the non-isolated one, but the vertical responses are increased by about 40%.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.90-103
• /
• 2018

This paper presents the development of two ANN models which can predict an optimum production rate by controlling choke size in oil well, and gas injection rate in gas-lift well. The input data was solution gas-oil ratio, water cut, reservoir pressure, and choke size or gas injection rate. The output data was wellhead pressure and production rate. Firstly, a range of each parameters was decided by conducting sensitive analysis of input data for onshore oil well. In addition, 1,715 sets training data for choke size decision model and 1,225 sets for gas injection rate decision model were generated by nodal analysis. From the results of comparing between the nodal analysis and the ANN on the same reservoir system showed that the correlation factors were very high(>0.99). Mean absolute error of wellhead pressure and oil production rate was 0.55%, 1.05% with the choke size model, respectively. And the gas injection rate model showed the errors of 1.23%, 2.67%. It was found that the developed models had been highly accurate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1021-1030
• /
• 2017

This paper describes the algorithm of computing thermal contact conductance between unmatched grid interfaces for finite element thermal analysis. Because grid interfaces should be coincident with adjacent meshes for finite element method, large amount of man hours and huge computations are required to match interfaces between many numbers of complex subdomains. A novel method that distributes feasibly the conductances to interface nodes is proposed. The aims of the method are described, and details of the nodal conductance distribution algorithm with less dependency on meshes are represented. The algorithm can be applied both the flat and curved interfaces in 3 dimensional space, and proposed method can combined with many finite element application including thermal analysis.

• Journal of Gastric Cancer
• /
• v.4 no.1
• /
• pp.32-35
• /
• 2004

Purpose: The most important prognostic factors in gastric cancer is the depth of invasion of the primary tumor and lymph node metastasis. The nodal staging of the 5th edition of the Union Internationale Contrala Cancrums (UICC) TNM classification in 1997 was changed based on the number of metastatic lymph node. We attempted to evaluate the prognostic significance of N2 group metastasis in pT3pN1 gastric cancer patients by comparing two different nodal staging systems. Materials and Methods: A retrospective analysis was made for 352 gastric cancer patients who underwent curative resection, including D2 dissection, from 1991 to 1997 at Asan Medical Center. A clinicopathologic comparison between two groups by using a nodal staging systems was summarized into a table. Cumulative survival rates were calculated by using the Kaplan-Meier method. The difference between the two groups was evaluated by using the log rank test with SPSS 11.5 for Windows Results: There were no statistical differences in clinicopathologic factors. However, there was a significant difference in survival rate between the two groups (P=0.0009). This suggests that N2 group metastasis in pT3pN1 gastric cancer patients has a clinical significance for predicting prognosis. Conclusion: Our results suggest a possibility of prognostic significance of N2 group metastasis. Therefore, anatomical location of the lymph node should be described.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.159-166
• /
• 1993

A retrospective analysis was done for 69 patients with Stage I and II non-Hodgkin's lymphoma who were treated from May 1981 to December 1990, in the Department of Radiadtion Oncology, Korea University Hospital. We used Ann Arbor Staging system and Working Formulation for histological classification. Forty-three patients (43/69, $62.3{\%}$) were Stage I and 26 patients (26/69, $37.7{\%}$) were Stage II, and B symptom was found in $10.1{\%}$ (7/69). Nodal lymphoma was $21.7{\%}$ (15/69); 14 patients with supradiaphragmatic disease and 1 patient with infradiaphragmatic disease. Extranodal lymphoma was $78.3{\%}$ (54/69): $64.8{\%}$ (35/54) for head and neck, $25.9{\%}$ (14/54) for gastrointestinal tract. Histologically, low grade consists of $8.7{\%}$ (6/69), intermediate grade $84.2{\%}$ (56/69), high grade $10.1{\%}$ (7/69), and diffuse large cell type was the most frequent form with 36 patients (36/69, $52.2{\%}$). Eighteen patients ($26.1{\%}$) were treated with radiation therapy alone,20 patients ($29.0{\%}$) with radiation therapy combined with chemotherapy, 15 patients ($21.7{\%}$) with radiation therapy combined with surgery and chemotherapy, Median survival duration was 28 months, and the range of survival time was from 1 month to 134 months. Overall five-year survival rate for Stage I and II disease was $54.2{\%}$, with $64.5{\%}$ for Stage I and $37.1{\%}$ for Stage II. For nodal lymphoma,5-year survival rate was $45.9{\%}$, and $56.5{\%}$ for extranodal lymphoma; $60.6{\%}$ for head and neck, $52.9{\%}$ for GI tract primary disease. Local control rate for all patients was $88.4{\%}$ (61/69), with $80{\%}$ (12/15) for nodal lymphoma and $90.7{\%}$ (49/54) for extranodal lymphoma. The total failure rate was $34.8{\%}$ (24/69). Five of 24 ($20.8{\%}$) patients who were failed developed local failure only, $12.5{\%}$ (3/24) local failure with distant failure, and distant failure only were found in $66.7{\%}$ (16/24). Between nodal lymphoma and extranodal lymphoma, there was no significant survival difference, but extranodal lymphoma showed higher incidence.

• Journal of Gastric Cancer
• /
• v.4 no.2
• /
• pp.109-120
• /
• 2004

Purpose: Individual gastric cancers demonstrate complicated genetic alterations. The PCR-based analysis of polymorphic microsatellite sequences on cancer-related chromosomes has been used to detect chromosomal loss and microsatellite instability. For the purpose of preoperative usage, we analyzed the correspondance rate of the microsatellite genotype between endoscopic biopsy and surgical specimens. Materials and Methods: Seventy-three pairs of biopsy and surgical specimens were examined for loss of heterozygosity and microsatellite instability by using 40 microsatellite markers on eight chromosomes. Microsatellite alterations in tumor DNAs were classified into a high-risk group (baselinelevel loss of heterozygosity: 1 chromosomal loss in diffuse type and high-level loss of heterozygosity: 4 or more chromosomal losses) and a low-risk group (microsatellite instability and low-level loss of heterozygosity: 2 or 3 chromosomal losses in diffuse type or $1\∼3$ chromosomal losses in intestinal type) based on the extent of chromosomal loss and microsatellite instability. Results: The chromosomal losses of the biopsy and the surgical specimens were found to be different in 21 of the 73 cases, 19 cases of which were categorized into a genotype group of similar extent. In 100 surgical specimens, the high-risk genotype group showed a high incidence of nodal involvement (19 of 23 cases: $\leq$5 cm; 23 of 24 cases: >5 cm) irrespective of tumor size while the incidence of nodal involvement for the low-risk genotype group depended on tumor size (5 of 26 cases: $\leq$5 cm; 18 of 27 cases: >5 cm). Extraserosal invasion was more frequent in large-sized tumor in both the high-risk genotype group ($\leq$5 cm: 12 of 23 cases; >5 cm: 23 of 24 cases) and the low-risk genotype group ($\leq$5 cm: 7 of 26 cases; >5 cm: 16 of 27 cases). The preoperative prediction of tumor invasion and nodal involvement based on tumor size and genotype corresponded closely to the pathologic tumor stage (ROC area >0.7). Conclusion: An endoscopic biopsy specimen of gastric cancer can be used to make a preoperative genetic diagnosis that accurately reflect the genotype of the corresponding surgical specimen.

• Journal of Advanced Marine Engineering and Technology
• /
• v.5 no.1
• /
• pp.20-27
• /
• 1981

The alignment of propulsion shaft systems by the fair curve method has been developed over the past twenty years and in recent years its basic problems have been almost solved. At the present time, studies on introducing actual conditions are being undertaken. In a fair curve alignment, its aim is to achieve a stable shaft system which will be relatively insensitive to misalignment or the influence of external factors such as thermal variations due to the sunshine, speed change, etc. The key point of fair curve alignment is the calculations of reactions in the straight support and reaction influence numbers. The present authors have developed those calculating method by the matrix method of the three-moment theorem. The fair curve alignment is based on the analysis of propulsion shaft system which is assumed as a continous beam on multiple support points. The propeller shaft is divided into several elements. For each element, the nodal point equation is derived by the three-moment theorem. Reaction of supporting points of straight shaft and reaction influence numbers are calculated by the matrix calculation of each nodal point equation. It has been found that results of calculation for the model shaft agree well with those of experiment which had been measured by the strain gauge method. Results of calculation for the actual propulsion shafting of the steam turbine had been compared also with those of Det norske Vertas.