• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.11
• /
• pp.896-900
• /
• 2010

Electrical properties of organic light-emitting diodes were studied in a device with 7,7,8,8-tetracyano-quinodimethane (TCNQ) to see how the TCNQ affects on the device performance. Since the TCNQ has a high electron affinity, it is used for a charge-transport and injection layer. We have made a reference device in a structure of ITO(170 nm)/TPD(40 nm)/$Alq_3$(60 nm)/LiF(0.5 nm)/Al(100 nm). And two types of devices were manufactured. One type of device is the one made by doping 5 and 10 vol% of TCNQ to N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine (TPD) layer. And the other type is the one made with TCNQ layer inserted in between the ITO anode and TPD organic layer. Organic layers were formed by thermal evaporation at a pressure of $10^{-6}$ torr. It was found that for the TCNQ doped devices, turn-on voltage of the device was reduced by about 20 % and the current efficiency was improved by about three times near 6 V. And for devices with TCNQ layer inserted in between the ITO anode and TPD layer, it was found that the current efficiency was improved by more than three times even though there was not much change in turn-on voltage.

• Korean Journal of Optics and Photonics
• /
• v.23 no.5
• /
• pp.217-221
• /
• 2012

In this paper, we have fabricated by means of the "Micro-Block Stacking (MBS)" method the 8 pin mini DIL integrated Triplexer, which can transmit CATV and voice/data at the same time in a single fiber. Our MBS technique is a novel scheme of compact optical module packaging which secures precision positioning of the components on the optical beam path by prefixed stacks of ceramic blocks. The subassembly in which a laser diode, two receiver photodiodes, two WDM filters, and four micro lenses are integrated is only $5.40mm{\times}2.15mm{\times}1.05mm$ in size. As the Triplexer is aligned to the single mode fiber, the transmitter power of -14.5 dBm and the receiver sensitivities of 0.83 A/W, 0.73 A/W for 1550 nm, 1490 nm, respectively are obtained.

• Korean Journal of Optics and Photonics
• /
• v.23 no.3
• /
• pp.124-127
• /
• 2012

We designed and fabricated dichroic filters for high-power fiber lasers to protect the pumping laser diode from counterpropagating laser beams. The transmittance at laser diode wavelengths of 905 nm~925 nm was designed to be less than 0.1% and the transmittance at the fiber laser or Brillouin scattering wavelengths of 1020 nm ~ 1100 nm was designed to be more than 99.9%. Since oxide materials have good adhesion to the $SiO_2$ substrate, $SiO_2/Ta_2O_5$ were used as coating materials. The filter was fabricated according to our optimized design and its characteristics were compared with the theoretical design. As a result, the transmittance at laser diode wavelengths of 905 nm~925 nm was measured to be less than 0.1%, and the transmittance at the fiber laser or Brillouin scattering wavelengths of 1020 nm~1100 nm was measured to be more than 95.5%, which coincided well with the theoretical design considering processing errors. The filter was found to operate well over 1W of input laser power.

• Korean Journal of Materials Research
• /
• v.8 no.6
• /
• pp.520-525
• /
• 1998

The optical properties with chemical composition change in BaO- MgO-$AI_2O_3$, system activated by divalent Eu ion were investigated under 254nm ultraviolet(UV) and 147nm vacuum ultraviolet(VUV). These phosphors emitted a blue light at a dominant wavelength of $\lambda$=445nm under UV and VUV irradiations. It was found that the brightness of $BaMgAI_{14}O_{23}$ phosphor increased with Eu concentration up to 10% under UV but it showed a maximum emitting intensity at 5% Eu for VUV. The emitting intensity of blue color of $BaMgAl_{10}O_{l7}$ phosphor was higher than that of $BaMgAI_{14}O_{23}$for both excitation. A further improvement in brightness was obtained for $Ba_{o.9}Ca_{0.1}MaAl_{14}O_{23}$ and $Ba_{0.9}Sr_{0.1}MgAl_{10}O_{17}$ phosphor synthesized by the substition of $Ba^{+2}$ ion with O.lmole of $Ca^{+2}$ or $Sr^{+2}$ ions in $BaMgAl_{IO}O_{17}$: Eu phosphor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2286-2292
• /
• 2008

In this paper, we design a RS(23,17) decoder for MB-OFDM(Multiband-Orthogonal Frequency Division Multiplexing) system, in which Modified Euclidean(ME) algorithm is adopted for key equation solver block. The proposed decoder has been optimized for MB-OFDM system so that it has less latency and hardware complexity. Additionally, we have implemented the proposed decoder using Verilog HDL and synthesized with Samsung 65nm library. From synthesis results, it can operate at clock frequency of 250MHz, and gate count is 20,710.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.447-454
• /
• 2017

Using two large coast guard ships at sea, we created four encounter situations ($000^{\circ}$, $045^{\circ}$, $090^{\circ}$, $135^{\circ}$) with high possibility of collision, from 3 NM up to 0.25 NM. As relative distance was gradually decreased, the subjects were measured at 0.25 NM intervals and perceived ship collision risk (PSCR) was determined by looking at the opponent ship. Characteristics were statistically analyzed using the obtained data. The purpose of this study was to analyze the characteristics of collision risk values obtained from twelve intervals, from 3 NM to 0.25 NM relative to encounter situations by curve fitting with appropriate polynomials, to determine the distance from which the change in perceived collision risk is greatest. As a result, an optimal regression equation for each distance interval was derived from each analysis direction. The greatest variation in average collision risk value was over the range 1.25 ~ 1 NM, and the collision risk value was largest at 1 NM. The maximum change in perceived collision risk was at 1 NM. These results can contribute to preventive guidelines to minimize human error in close proximity situations with a high probability of ship collision.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.749-764
• /
• 2000

Amorphous TaSiN thin films of about 90 nm thick were deposited onto poly-Si and $SiO_2/Si$ substrates by rf magnetron sputtering method. TaSiN films exhibited amorphous phase with no crystllization up to $900^{\circ}C$ in oxygen ambient. The penetration depth of oxygen diffusion increased with increasing annealing temperature in oxygen ambient and reached 20 nm deep in a $Ta_{23}Si_{29}N_{48}$ layer at $600^{\circ}C$ for 30min. The resistivity of as-deposited $Ta_{23}Si_{29}N_{48}$ thin films was about $1,300{\mu}{\Omega}-cm$, however those of annealed films markedly increased above $700^{\circ}C$ in oxygen ambient as the annealing temperature increased.

• Journal of Sensor Science and Technology
• /
• v.23 no.6
• /
• pp.416-419
• /
• 2014

We grew a $Li_6Lu(BO_3)_3:Ce^{3+}$ single crystal as a new scintillator. And, the scintillation and thermoluminescence properties of the scintillator were determined. The emission spectrum of $Li_6Lu(BO_3)_3:Ce^{3+}$ is located in the range of 370~530 nm, peaking at 416 nm and 439 nm, due to the $5d{\rightarrow}4f$ transition of $Ce^{3+}$ ions. The fluorescence decay time of the crystal is composed two components. The fast component is 34 ns (84%) and the slow component is 125 ns (16%) of the crystal. The afterglow is caused by the electron and hole traps in the crystal lattice. We determined physical parameters of the traps in the crystal. The thermoluminescence trap are composed a trap. The determined activation energy (E) and frequency factor (s) of the TL trap are 1.05 eV and $4.4{\times}10^{10}s^{-1}$, respectively.

• Journal of Welding and Joining
• /
• v.31 no.4
• /
• pp.23-27
• /
• 2013

Laser heat source was used for automotive interior and exterior parts to reduce weights. Typically, 900's nm wavelength of laser has been widely used for polymer joining, however, the transmittance of the laser beam thorough clear polymers such as PMMA or PC has been an issue to overcome. To solve this issue, 1,940nm laser was applied on the clear polymer for the better absorption and 900nm laser beam was used for main laser for the joining. Conventional Gaussian or Elliptical heat source approximation has limitation in polymer which had deeper skin depth where major laser beam absorbs. To accurately simulate the physical laser beam absorption and joining optical properties were experimentally measured for the computer FEM simulation. The simulation results showed close correlation between theoretical and experimental results. The developed laser process is expected to increase productivity and gap closing which can cause failure of joining in laser material processing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.143-147
• /
• 2010

We have fabricated simple triple-layer blue-emitting phosphorescent organic light emitting diodes (OLEDs) using different thicknesses of N,N'-dicarbazolyl-3,5-benzene (mCP) host layers doped with bis[(4,6-di-fluorophenyl)-pyridinate-N,$C^{2'}$]picolmate (FIrpic) guest materials. The thicknesses of mCP:FIrpic layers were 5, 10, and 30 nm. Driving voltage, current and power efficiencies were investigated. The current efficiency was higher in the 10 nm thick mCP:FIrpic device, resulting from the better electron-hole balance. The device with 10 nm mCP:FIrpic layer exhibited the maximum current efficiency of 22.5 cd/A and power efficiency of 7.4 lm/W at a luminance of 1000 cd/$m^2$.