• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.110-116
• /
• 2019

This study was conducted to determine the effects of a pre-planting fertilizers with various $NH_4{^+}:NO_3{^-}$ ratios in a coir dust:peatmoss:perlite (3.5:3.5:3.0, v/v/v) medium on the growth of hot pepper (Capsicum annuum L. cv. Nokkwang) plug seedling. Nitrogen levels were fixed to $300mg{\cdot}L^{-1}$ and the $NH_4{^+}:NO_3{^-}$ ratios were varied to 0:100, 27:73, 50:50, 73:27, and 100:0. The 50-cell trays were filled with treatment media containing pre-plant fertilizers, then seeds were sown. After seeds were germinated, the trays were moved to greenhouse and seedlings were feed with 13-2-13 and 20-9-20 fertilizers, alternatively. The changes in pH and EC were measured every week and soil solution for nutrient concentrations were analyzed in week 0, 3, and 7. The measurements of seedling growths as well as analysis of tissue nutrient contents were also conducted in week 7. The varied $NH_4{^+}:NO_3{^-}$ ratios did not influence on the pHs of root media after incorporation of pre-planting fertilizers, but the ECs were heightened as proportion of $NH_4{^+}$ to $NO_3{^-}$ were elevated. During the raising of seedlings, the pHs rose over time in the treatments of 0:100 and 27:73 ($NH_4{^+}:NO_3{^-}$). The concentrations of all macro-elements in root media decreased gradually as seedlings grew in all treatments. The seedling growths 7 weeks after seed sowing were the highest in the treatments of 27:73 and 50:50 ($NH_4{^+}:NO_3{^-}$) and those became worse in the treatments of higher $NH_4{^+}$ ratios than 73%. In terms of inorganic element contents based on the dry weight of above ground tissue, the treatment of 0:100 showed the lowest content of Ca, Mg, Na, Cu, Mn, and Zn. Based on the results, it is desired that $NH_4{^+}$ ratio in pre-planting fertilization is maintained to be 50% or less for the raising of hot pepper plug seedlings.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.342-351
• /
• 2019

The optimum N concentrations incorporated as pre-planting nutrient charge fertilizer were determined for seedling raising using cylindrical paper pots. A root medium was formulated by blending of peat moss (particles smaller than 2.84 mm were 80-90%) and perlite (1 to 3 mm) with the ratio of 7:3 (v/v). The treatment N concentrations incorporated during the root medium formulation were adjusted to 0, 150, 250, 500, and $750mg{\cdot}L^{-1}$ and the concentrations of essential nutrients except N were equal in all treatments. After making of paper pots and putting into the 40-cell tray, the seeds of Chinese cabbage ('Chunmyeong Bom Baechu') and pak-choi ('Hanog cheonggyeongchae') were sown. During the raising of seedlings, weekly analysis of medium pH, EC and concentrations of inorganic elements were conducted. After 21 and 20 days after seed sowing of Chinese cabbage and pak-choi, the growth of the above-ground parts were measured and contents of inorganic elements in the plant tissues were analyzed. During the growing period, pH of the root media rose gradually and the EC decreased rapidly at week 3. The pH of root media at harvest was in the range of 5.3 to 5.9 in Chinese cabbage and 4.93 to 5.39 in pak-choi. Growth of the aboveground parts in terms of fresh and dry weight in both the plants were the highest in the $250mg{\cdot}L^{-1}$ N treatment and the lowest in the control treatment. The elevation of pre-planting N concentrations in root medium resulted in the increase of tissue N content and decrease of P, Ca, and Mg contents. The regression equation derived from the influence of varied pre-planting N concentrations on dry weight of above-ground tissue were $y=-0.0036x^2+0.0021x+0.0635$ ($R^2=0.9826$) in Chinese cabbage and $y=-0.16x^2+0.0009x+0.032$ ($R^2=0.991$) in pak-choi. When the low critical concentration of pre-plant N is taken at the point where dry weight of above-ground tissue is 10% less than maximum (0.40 g in Chinese cabbage and 0.16 g in pak-choi), those point are 0.36 g and 0.144 g per plant in Chinese cabbage and pak-choi, respectively. The lower critical N concentrations of root media calculated from the regression equations are $196mg{\cdot}L^{-1}$ for Chinese cabbage and $187mg{\cdot}L^{-1}$ for pak-choi. These results indicate that optimum pre-plant N concentrations for seedling raising using paper pots are in the range of 196 to $250mg{\cdot}L^{-1}$ for Chinese cabbage and 187 to $250mg{\cdot}L^{-1}$ for pak-choi.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.2
• /
• pp.102-109
• /
• 2021

In this study, the effect of forage sources in the total mixed ration (TMR) on in vitro goat rumen fermentation was investigated. Rice straw (RS), Italian ryegrass (IRG), timothy (TIM), and alfalfa (ALF) were used as forage sources. Each forage source was mixed with a commercial goat concentrate diet in the ratio of 1:1. Total 4 TMR were prepared. Rumen simulated in vitro fermentation using goat rumen fluid collected from the slaughterhouse was conducted until 72^th. For fermentation parameters, gas production (GP), volatile fatty acids (VFAs), and ammonia nitrogen (NH₃-N) were examined. All assays were performed at 24^th, 48^th, and 72^th h of incubation individually. Contents of crude protein and non-fibrous carbohydrate were greater in the order of RS < IRG < TIM < ALF. Significant treatment effects were found in valerate and NH₃-N at 24^th h of incubation (p<0.05). ALF showed the greatest contents of them and RS was the lowest. At 48^th incubation, a significant effect was detected at GP (p<0.05) and RS was greater than others. However, GP of RS was lower than others at 72^th. Significant effects on Total VFA, butyrate, and valerate productions were found at 72^th h of incubation (p<0.05). ALF showed the greatest production. Methane production from all treatments was not significantly different for each incubation time (p>0.05). The present study provided primary information on how goat rumen fermentation responds to different nutrient contents and forage sources of TMR. And the information could be used for the design or optimizing economical diet formulation for goats.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.305-321
• /
• 2022

The stone chamber tomb in Eungpyeong-ri, Buyeo, is a joint tomb that contains the bodies of two individuals. This paper investigates the relationship between the buried persons and the characteristics of the stone chamber tomb. Based on the geographical location, relics, and the excavated human bones, it was determined that the tomb was built during the Sabi Period of the Baekje Dynasty and that the buried individuals were most probably residents of high stature or government officials. To study the excavated bones, the remains were carefully collected and conservation was carried out. Before collecting samples from the human bones for the analytical research, the results of near-infrared analysis were used to collect the samples for the isotope analysis and DNA analysis. The most important issue when handling the excavation site was the reinforcing agent and the concentration of the agent used. In situations like this, Paraloid B-72 is the most suitable agent. When the shape of human bones was difficult to distinguish from the soil, conservation was performed using X-ray and CT imaging data. The same chemical used for the reinforcement of the site was used to complete a minimum level of conservation to the surface areas where the conservation treatment of removing foreign substances, the reinforcement areas, and bonded areas were carried out. The collagen yield from the sample obtained at selected position was 3.8% to 6.1%. The results of analyzing the stable isotopes of carbon and nitrogen found in the extracted collagen showed that the stable isotope ratios came out to δ¹³C -18.3‰±0.1‰, -19.0‰±0.1‰ for EBW and δ¹⁵N 10.7‰±0.5‰, 10.6‰±0.1‰ for EBE. It is believed the two individuals consumed small amounts of minor cereals, mainly from C₃ plants, and protein was obtained from eating terrestrial animals. What's more, the deviations in data obtained from the two individuals were so small that it could be inferred that the individuals ate similar foods. Considering the preservation state of the sample, amplifying DNA for the DNA analysis would have been very difficult since the amount of surviving DNA was so deficient. For DNA analysis, it is anticipated that the results could be derived by applying improved extraction methods that will be developed in the future. In this research, any association between scientific analysis(DNA and stable isotope ratio) and near-infrared spectroscopy was difficult to establish. Further research is needed on the utilization of near-infrared analysis for gathering samples from human bones.

• Clean Technology
• /
• v.28 no.1
• /
• pp.79-93
• /
• 2022

In this study, an electronics industrial wastewater activated sludge model (e-ASM) to be used as a Water Digital Twin was calibrated based on real high-tech electronics industrial wastewater treatment measurements from lab-scale and pilot-scale reactors, and examined for its treatment performance, effluent quality prediction, and optimal process selection. For specialized modeling of a high-tech electronics industrial wastewater treatment system, the kinetic parameters of the e-ASM were identified by a sensitivity analysis and calibrated by the multiple response surface method (MRS). The calibrated e-ASM showed a high compatibility of more than 90% with the experimental data from the lab-scale and pilot-scale processes. Four electronics industrial wastewater treatment processes-MLE, A2/O, 4-stage MLE-MBR, and Bardenpo-MBR-were implemented with the proposed Water Digital Twin to compare their removal efficiencies according to various electronics industrial wastewater characteristics. Bardenpo-MBR stably removed more than 90% of the chemical oxygen demand (COD) and showed the highest nitrogen removal efficiency. Furthermore, a high concentration of 1,800 mg L^-1 T MAH influent could be 98% removed when the HRT of the Bardenpho-MBR process was more than 3 days. Hence, it is expected that the e-ASM in this study can be used as a Water Digital Twin platform with high compatibility in a variety of situations, including plant optimization, Water AI, and the selection of best available technology (BAT) for a sustainable high-tech electronics industry.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.45-53
• /
• 2022

In order to improve the emission of diesel engines, natural gas-diesel dual fuel combustion compression ignition engines are in the spotlight. In particular, a reactivity controlled compression ignition (RCCI) combustion strategy is investigated comprehensively due to its possibility to improve both efficiency and emissions. With advanced diesel direct injection timing earlier than TDC, it achieves spontaneous reaction with overall lean mixture from a homogeneous mixture in the entire cylinder area, reducing nitrogen oxides (NOx) and particulate matter (PM) and improving braking heat efficiency at the same time. However, there is a disadvantage in that the amount of incomplete combustion increases in a low load region with a relatively small amount of fuel-air. To solve this, sensitive control according to the diesel injection timing and fuel ratio is required. In this study, experiments were conducted to improve efficiency and exhaust emissions of the natural gas-diesel dual fuel engine at low load, and evaluate combustion stability according to the diesel injection timing at the operation point for power generation. A 6 L-class commercial diesel engine was used for the experiment which was conducted under a 50% load range (~50 kW) at 1,800 rpm. Two injectors with different spray patterns were applied to the experiment, and the fraction of natural gas and diesel injection timing were selected as main parameters. Based on the experimental results, it was confirmed that the brake thermal efficiency increased by up to 1.3%p in the modified injector with the narrow-angle injection added. In addition, the spray pattern of the modified injector was suitable for premixed combustion, increasing operable range in consideration of combustion instability, torque reduction, and emissions level under Tier-V level (0.4 g/kWh for NOx).

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.4
• /
• pp.11-17
• /
• 2022

Ginseng hydroponic cultivation was cultivated as a nutrient solution and the growth was investigated 60 days later. The length(cm) increased from EC1.0 and EC2.0 concentrations to 5.47cm before, followed by EC0.5, 2.5, 1.5, and 0.0. The weight(g) increased from EC1.0 concentration to 2.39g before, followed by EC1.5, 2.5, 0.5, 0.0 and 2.0. The width(mm) increased from EC1.0 concentration to 1.9mm than before, followed by EC2.5, 0.5, 1.5, 2.0, and 0.0. In the ginseng growth experiment according to nutritional components, the average length of NO₃-N mixed experiment increased to 0.33cm, the average weight of 0.04g, and the average width of 0.35mm. In the experiment in which NH₄-N was mixed without NO₃-N, the growth was reduced to 0.37cm in average length, 0.03g in average weight, and 0.22mm in average width. In an experiment in which germanium(Ge) is mixed with a nutrient component, the average length is increased to 0.33cm, the average weight is increased to 0.04g, and the average width is increased to 0.35mm, but in an experiment excluding germanium(Ge), the growth is reduced to 0.11cm, the average weight is 0.04g, and the average width is 0.03mm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.5
• /
• pp.379-386
• /
• 1990

Varietal difference of protein content in forty eight Korean recommended rice cultivars and environmental Variation in protein content of milled rice harvested at six sites of the middle and/or southern plain and four locations of mid-mountainous and/or alpine area in 1989 were investigated. Also, the composition of amino acid in milled rice was compared among three rice varieties: a high-protein japonica rice, Nongbaek, a high-protein Tongil-type rice, Yongjubyeo, and a low-protein japonica rice, Hwaseongbyeo. Korean recommended rice varieties showed 7.93% of average protein content with varietal variation from 5.5% to 10.2% for milled rice harvested in 1988, and 9.17% of mean protein content with the variation from 6.3% to 12.0% for milled rice harvested in 1989. Tongil-type rice was about 1% higher in protein content of milled rice than japonica. The low-protein japonica rice, Hwaseongbyeo exhibited lower content of essential amino acids per g of rice flour sample than the high-protein japoinica, Nongbaek and/or Tongil-type rice, Yongjubyeo, but the relative content of essential amino acids per 16.8g of nitrogen in milled rice of the former was not so different with those of the latters. Among amino acids the content of glutamic acid was highest and among essential amino acids the content of leucine was highest while methionine was lowest. The protein content of milled rice was negatively correlated with days from seeding to heading, K/Mg ratio, alkali digestion value(l-7) and amylose content, but it was positively correlated with translucency and magnesium content of milled rice. The protein content of milled rice harvested in the southern plain paddy field was about 1% higher compared with those harvested in the Middle plain. Also, the protein content of milled rice harvested in the southern mid-mountainous and alpine area was about 0.8% higher compared with those harvested in the resemble altitude area of the middle-northern part of Korea. The contribution of environmental variation to total in plain area was about 28.1% while that in mid-mountainous and alpine area was about 56.4%.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.3
• /
• pp.147-158
• /
• 2007

To clarify the bloom pattern and species succession in phytoplankton community, the population dynamics with the determination of physico-chemical factors have been studies in Masan Bay, the south sea of Korea, for the periods November 2003-October 2004. Concentration of $NH_4-N$ was always higher than that of $NO_3-N$, which was similar level as compared to other costal areas. $PO_4-P$ concentration was lower than those in other coastal areas but similar to oligotrophic environments. Thus, phosphate seems the limiting nutrient rather than nitrogen. $SiO_2-Si$ concentration was also low as compared to other costal areas. Si:P ratio was low from autumn to winter, suggesting silicate and/or phosphate limitation during this period. The cell density of phytoplankton was high in winter 2003 and early autumn 2004. The carbon biomass was high in winter 2003 and summer 2004. And chlorophyll-a concentration was high in late autumn 2003 and summer 2004. Among 78 species of phytoplankton found in the bay during the investigated period, dominant species were two diatoms of Cylindrotheca closterium, Skeletonema costatum, and three dinoflagellates of Heterocapsa triquetra, Prorocentrum minimum, P. triestinum, and one raphidophyte of Heterosigma akashiwo. P. minimum dominated from late autumn to winter, but it was replaced by H. triquetra in late winter. P. triestinum dominated from late spring to early summer. Simultaneously, H. akashiwo cell density steadily increased, and it became dominant with C. closterium in late summer. With decreasing of H. akashiwo and C. closterium, S. costatum became the most dominant species in autumn. The canonical analyses showed that total phytoplankton cell density related to diatom cell density and it was affected by temperature, and concentrations of $NO_3-N\;and\;PO_4-P$. The carbon bio-mass and $chlorophyll-{\alpha}$ concentration related to diatom- and dinoflagellate cell densities and these were affected by flagellate cell density, salinity, and concentrations of $SiO_2-Si\;and\;PO_4-P$. Last six years monitoring data in Masan city obtained from Korean Meteorological Agency indicates gradual increase in air temperature. And the precipitation decreased especially in spring season. The winter bloom found in 2003 may be caused by the increase in the temperature and this bloom subsequently induced the nutrients depletion, which continued until next spring probably due to no precipitation. Therefore, the spring bloom, which had been usually observed in the bay, might disappear in 2004.

• Clean Technology
• /
• v.30 no.2
• /
• pp.123-133
• /
• 2024

Zeolite template carbon (ZTC) was synthesized as an adsorbent to remove low-concentration CH₄ from the atmosphere. The synthesis of ZTC was performed using CH₄ and C₂H₂ as carbon precursors and their impact on adsorption was investigated. ZTC was also synthesized using Y zeolite ion-exchanged with CaCl₂ and LiCl as templates to investigate the effect of using metals in ion exchange. The comparison of the carbon precursors revealed that C₂H₂ had a higher carbon yield than CH₄. The synthesized ZTC exhibited developed micropores due to carbon deposition deep inside the micropores of the zeolite template. The kinetic diameter of C₂H₂ (0.33 nm) is smaller than that of CH₄ (0.38 nm), which allowed for its deposition. The study compared metal precursors used for ion exchange and confirmed that the CaCl₂-based ZTC developed more micropores compared to the LiCl-based ZTC. The ion-exchanged Ca inhibited pore blocking by the carbon precursor, allowing it to enter the pores. The ability of synthesized ZTC to adsorb N₂ and CH₄ at 298 K was investigated. The results showed that CH₄ had a higher overall adsorption amount than N₂. The sample synthesized using C₂H₂ and CaY exhibited the highest N₂ and CH₄ adsorption capacity. However, the sample synthesized with CH₄ had the highest CH₄/N₂ gas uptake ratio, which is a crucial factor in designing an adsorption process. The observed difference was likely caused by the underdevelopment of ultrafine pores that are associated with N₂ adsorption. This resulted in a reduction of N₂ adsorption, leading to an increase in CH₄/N₂ separation.