• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.291-295
• /
• 2011

복사냉각 방식의 연소기 노즐확장부의 열/구조적인 안정성을 평가하기 위하여 열/구조해석을 수행하였다. 노즐확장부에 적용된 재료는 초내열합금인 니오븀 합금을 사용하였다. 노즐확장부는 확대노즐부에 비하여 팽창비가 크기 때문에 구조물의 사이즈가 연소실이나 확대노즐부에 비하여 상대적으로 크다. 이러한 이유 때문에 노즐확장부의 두께를 최소화 하는 것이 중요하다. 이를 위하여 구조물의 두께를 1.0 mm에서 0.4 mm까지 감소시켜 두께의 변화에 따른 열/구조적인 안정성을 평가하였다. 구조해석결과 0.4 mm 두께의 노즐확장부도 열/구조적으로 안정하게 작동할 수 있음을 보여주었다. 실제 연소기가 작동할 때 발생되는 진동에 의한 영향은 추후에 추가적으로 고려할 예정이다.

• Corrosion Science and Technology
• /
• 제7권2호
• /
• pp.92-98
• /
• 2008

This paper describes the experiments of the corrosion and the sliding tests of the nickel-based alloys for the gate valve seating materials used at high pressure and temperature. The general corrosion rates and IGC susceptibility are tested in pressurized water at 533 K and 575 K and in Strauss test solution. The sliding tests have been done in pressurized water at 293 k, 473 K and 573 k. The alloys containing above 10% chromium may have the anti-corrosion properties that could be applied to the valve seats for the power plants. The good sliding performance and the good pressure tightness are obtained when the disc specimens that have hardness 500 to 600 Hv combined with the seat specimens that have hardness 250 to 410 Hv containing about 40 percent of iron. The large size gate valves sliding tests have certified the test results. The anti-wear properties of the seat alloy and the anti-IGC susceptibility of the disc alloy could be improved by the addition of silicon and niobium, respectively.

• Corrosion Science and Technology
• /
• 제17권2호
• /
• pp.81-89
• /
• 2018

In this study, the effect of Nb alloying element on the corrosion fatigue properties of high strength steel is investigated by conducting fatigue experiments under corrosive condition and hydrogen induced condition, potentiodynamic polarization test, tensile test and surface analyses. Nb element is added to enhance the mechanical property of medium carbon steel. This element forms MX-type phases such as carbides and nitrides which are playing an important role in the grain refinement. The grain refinement is one of the effective way to improve mechanical property because both tensile strength and toughness can be improved at the same time. However, MX-type phase precipitates can be a susceptible site to localized corrosion in corrosive environment due to the potential difference between matrix and precipitate. The obtained results showed that Nb-added steel improved corrosion fatigue property by grain refinement. However, it is degraded for hydrogen-induced fatigue property due to Nb, Ti-inclusions acting as a stronger trap.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.10-20
• /
• 2016

The Cable-In-Conduit-Conductor (CICC) for the ITER tokamak Central Solenoid (CS) has undergone design change since the first prototype conductor sample was tested in 2010. After tests showed that the performance of initial conductor samples degraded rapidly without stabilization, an alternate design with shorter sub-cable twist pitches was tested and discovered to satisfy performance requirements, namely that the minimum current sharing temperature ($T_{cs}$) remained above a given limit under DC bias. With consistent successful performance of ITER CS conductor CICC samples using the alternate design, an attempt is made here to revisit the internal electromagnetic properties of the CICC cable design to identify any correlation with conductor performance. Results of this study suggest that there may be a simple link between the $Nb_3Sn$ CICC internal self-field and its $T_{cs}$ performance. The study also suggests that an optimization process should exist that can further improve the performance of $Nb_3Sn$ based CICC.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.281-288
• /
• 1995

to prepare the TiO2 thin films, acetyl-acetone(2.4-pentanedione)(1 : 1 molar ratio) was dissolved in the propanol solution of titanium(IV)isopropoxide(Ti[OCH(CH3)2]4). Al, Cr and Sb in the form of soluble salt and niobium ethoxide were added s dopants, respectively. Thin films were coated by the dip-coating method and characteristics were investigated by XRD, SEM and conductance meter. As a result, viscosity of sol was maintained below 4 centi Poise more than 20 days, and crystal growth and diminution of resistivity occurred as the heat treatment temperature increased. The grains grew over 1${\mu}{\textrm}{m}$ and the lowest resistivity was obtained when Nb was added at 130$0^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.690-692
• /
• 2001

A FEM model of the remote-field eddy current effect is presented for zirconium-2.5percent niobium(Zr-2.5%Nb) nuclear reactor pressure tubes to demonstrate the important electromagnetic field. Phenomena that describe this effect. This model is applied to evaluate the optimal operating frequency and detector position. There are many ambiguous experimental results connected with this technique. Finite element calculations can be used in the interpretation of these experimental results even though the electromagnetic fields measured in the remote-field technique are very small.

• 전자공학회논문지A
• /
• 제30A권10호
• /
• pp.12-19
• /
• 1993

Because of their high sensitivity and moderate bandwidth, superconducting receivers with SIS (Superconductor Insulator Superconductor) tunnel junction mixer are now widely used for millimeter wave radio astronomy. In this paper we have introduced how to determine the parameters of SIS tunnel junction which have to be optimized to achieve a good mixer performance. From these results of optimized junction parameters determined by this methods, SIS junctions which consist of a series array of four Nb/Al-AlOx/Nb junctions with each area 3.4${\mu}m^{2}$ have been fabricated by SNEP (Selective Niobium Etching Process) and RIE (Reactive Ion Eching). Also we have tested their DC current-voltage characteristics. These SIS junctions will be used as a mixer for 100GHz band cosmic waves receiver.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.33-37
• /
• 2017

Single phase niobium nitride (NbN) coatings were deposited using asymmetric bipolar pulsed dc sputtering by varying pulse frequency and duty cycle of pulsed plasmas. Crystal structure, microstructure, morphology and mechanical properties were examined using XRD, FE-SEM, AFM and nanoindentation. Upon increasing pulse frequencies and decreasing duty cycles, the coating morphology was changed from a pyramidal-shaped columnar structure to a round-shaped dense structure with finer grains. Asymmetric bipolar pulsed dc sputtered NbN coatings deposited at pulse frequency of 25 kHz is characterized by higher hardness up to 17.4 GPa, elastic modulus up to 193.9 GPa, residual compressive stress and a smaller grain size down to 27.5 nm compared with dc sputtered NbN coatings at pulse frequency of 0 kHz. The results suggest that the asymmetric bipolar pulsed dc sputtering technique is very beneficial to reactive deposition of transition-metal nitrides such as NbN coatings.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1402-1404
• /
• 2001

Josephson junction arrays of the type $Nb/Al-Al_2O_3/Nb$ were prepared by DC magnetron sputtering. The tunnel barrier was formed by in-situ thermal oxidation. Individual junctions were defined using selective niobium etching process(SNEP). The characteristic curves of Josephson junction arrays fabricated with and without cooling the substrate were represented. The junctions deposited without cooling showed poor characteristics(high leakage current, low gap voltage), and a high quality Josephson junction array of 2,000 junctions with high hysteresis was obtained with cooling and when operated at 74.6 GHz, it generated stable quantized voltage steps up to 2.2 V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.109-112
• /
• 1993

In this paper, We have studied about the microstructure of the piezoceramics PZT that were added with some kinds of additives, such as Niobium(Nb), Iron(Fe) or Manganese(Mn). The grain size of PZT ceramics was decreased with increasing the amounts of additive of Nb or Fe, while increased with increasing Mn. The curie temperature was changed slightly for the PZT ceramics containing $Fe^{3+}$, which is not dependent on the amounts, but $Nb^{5+}$ or $Mn^{2+}$ ion added PZT was lowered. The resistivity was increased with increasing the amounts of $Nb^{5+}$ additive, while decreased for $Mn^{2+}$ additive.