• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.1
• /
• pp.19-24
• /
• 1995

Large size potassium lithium niobate (KLN) crystals with dimensions of $8{\times}6{\times}2 mm^3$ were grown by the top - seeded solution growth (TSSG) method. The extraordinary refractive index $n_e$at the second harmonic frequency for KLN crystal depends on the composition and decreases in this crystal due to the large Li content. KLN crystal was characterized by observation in UV - VIS spectrometry. It is transparent from the ultraviolet to infrared spectral regions that the transmission limit and cut- off wavelength are about 350 and 380 nm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.264-264
• /
• 2007

$B_2Mg_{2/3}/Nb_{4/3}O_7\;(B_2MN)$ thin films and $Bi_{3/2}MgNb_{3/2}O_7\;(B_{1.5}MN)$ thin films were deposited as a function of various deposition temperatures on Pt/$TiO_2/SiO_2$/Si substrates by radio frequency magnetron sputtering system. Both of their thin films are shown to crystalline phase at $500^{\circ}C$, deposition temperature, using 100W RF power. The composition of them and structural micro properties are investigated by RBS spectrum and SEM, AFM. 200 nm-thick $B_2MN$ thin films were deposited at room temperature had capacitance density of $151nF/cm^2$ at 100kHz, dissipation factor of 0.003 and had capacitance density of $584nF/cm^2$ at 100kHz, dissipation factor of 0.0045 at $500^{\circ}C$ deposition temperature. Both of their dielectric constant deposited at room temperature and at $500^{\circ}C$ were each approximately 40 and 100.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.521-524
• /
• 2010

Low loss perovskite niobates and tantalates have been placed on a short list of functional materials for future technologies. In this study, we fabricated Ag(Ta,Nb)$O_3$ thick films on the $Al_2O_3$ substrates by the screen printing method. The Ag(Ta,Nb)$O_3$ powders were fabricated by the mixed oxide method. The sintering temperature and time were $1150^{\circ}C$ and 2 hrs, respectively. The results of XRD analysis showed that the specimens employed in this study had the pesudo cubic structure. The dielectric permittivity and loss tangent of the films have been characterized from 1 kHz to 1 MHz. Also the dielectric permittivity and loss tangent were measured from 303 K to 393 K. The electrical properties of the film are also discussed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.62-62
• /
• 2008

As micro-system move toward higher speed and miniaturization, requirements for embedding the passive components into printed circuit boards (PCBs) grow consistently. They should be fabricated in smaller size with maintaining and even improving the overall performance. Miniaturization potential steps from the replacement of surface-mount components and the subsequent reduction of the required wiring-board real estate. Among the embedded passive components, capacitors are most widely studied because they are the major components in terms of size and number. Embedding of passive components such as capacitors into polymer-based PCB is becoming an important strategy for electronics miniaturization, device reliability, and manufacturing cost reduction Now days, the dielectric films deposited directly on the polymer substrate are also studied widely. The processing temperature below $200^{\circ}C$ is required for polymer substrates. For a low temperature deposition, bismuth-based pyrochlore materials are known as promising candidate for capacitor $B_2Mg_{2/3}Nb_{4/3}O_7$ ($B_2MN$) multi layers were deposited on Pt/$TiO_2/SiO_2$/Si substrates by radio frequency magnetron sputtering system at room temperature. The physical and structural properties of them are investigated by SEM, AFM, TEM, XPS. The dielectric properties of MIM structured capacitors were evaluated by impedance analyzer (Agilent HP4194A). The leakage current characteristics of MIM structured capacitor were measured by semiconductor parameter analysis (Agilent HP4145B). 200 nm-thick $B_2MN$ muti layer were deposited at room temperature had capacitance density about $1{\mu}F/cm^2$ at 100kHz, dissipation factor of < 1% and dielectric constant of > 100 at 100kHz.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.3
• /
• pp.297-302
• /
• 2022

We investigated the origin of magnetic behaviors induced by an asymmetric spin exchange interaction in Fe-site engineered lead iron niobate [Pb(Fe_1/2Nb_1/2)O₃, PFN], which exhibits a room-temperature multiferroicity. The magnitude of spin exchange interaction was regulated by the introduced transition metals with a distinct Bohr magneton, i.e., Cr, Co, and Ni. All compositions were found to have a single-phase perovskite structure keeping their ferroelectric order except for Cr introduction. We discovered that the incorporation of each transition metal imposes a distinct magnetic behavior on the lead iron niobate system; antiferro-, hard ferro-, and soft ferromagnetism for Cr, Co, and Ni, respectively. This indicates that orbital occupancy and interatomic distance play key roles in the determination of magnetic behavior rather than the magnitude of the individual Bohr magneton. Further investigations are planned, such as X-ray absorption spectroscopy, to clarify the origin of magnetic properties in this system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.168-168
• /
• 2009

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.111-114
• /
• 1998

Lithium Niobate {{{{ { LiNbO}_{ 3} }}}} single crystals grown by Czichralski method at the congruent composition, have ferroelectric microdomains. These microdomins were investigated by chemical etching with hydrofluoric acid (HF) AND NITRIC ACID ({{{{ { HNO}_{3 } }}}}), and by us ing optical microscopy, scanning electron microscopy and atomic force microscopy

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.640-643
• /
• 2008

In this work, a novel tunable MIM capacitor with the meshed electrode is proposed first in order to improve the tunability characteristics using fringe fields. The capacitors were fabricated on a low-resistivity Si substrate employing lead zinc niobate (PZN) thin film dielectric. The fabricated capacitor with the meshed electrode, whose line width and spacing was $2.5{\mu}m$, achieved the effective capacitance tunability of 31 % that is higher value of 18.5 % than that of the conventional capacitor with the rectangular-type electrode.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.222-223
• /
• 2001

Optical parametric oscillator(OPO) has been used to generate coherent and tunable laser source with birefringent phase-matching technique in various nonlinear materials. In birefringent phase-matching, the output wavelength is controlled with angle or temperature tuning of the refractive index. However these tuning methods have several limitations such as restriction of tuning wavelength due to reasonable angular and temperature tuning ranges, Poynting vector walk-off which limits the interaction length, and thermal stabilization time. (omitted)

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.328-329
• /
• 2004