• 콘크리트학회논문집
• /
• 제13권4호
• /
• pp.346-353
• /
• 2001

본 연구는 얇은 시멘트판 제품의 보강재로써 건조공정에 의해 생산된 폐지섬유의 최적 배합비를 도출하기 위하여 수행되었다. 이를 위해 순수 목질섬유 대비 폐지섬유의 대체수준을 세분화하여 실험을 실시하였으며, 슬러리-탈수 공법을 사용하여 폐지섬유보강 시멘트 복합체를 제조하였다. 본 연구는 실험적 연구와 반응표면 분석법을 활용한 통계적 분석을 통해 공정인자(가압, 비가압)과 섬유보강재 조건(섬유혼입율, 순수섬유 대체수준)을 최적화하였다. 최적화된 재생 폐지섬유 시멘트 복합체를 기술적으로 분석하였으며, 그 결과, 폐지섬유보강 시멘트 복합체의 성능과 경제적 측면에서 폐지섬유의 재활용이 가능하리라 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.42-45
• /
• 1996

A residue from the newsprint waste was investigated as a filler in adhesive for bonding southern pine plywood. The residue was prepared by drying the wet residue to 8% moisture content and grinding the dry material using a laboratory Wiley mitt with a 75-${\mu}m$(200-mesh) screen. The residue was compared to a commercial filler commonly used in structural plywood adhesives. A total of 48 three-ply panels. 12.7mm nominal thickness and 0.3 by 0.3 m in size, were fabricated at two press times(4 and 5 min) and three assembly times(20, 40 and 60 min). Evaluations of the residue were carried out by performance tension shear tests after two 4-hour boil accelerated aging tests on plywood. The test results included tension shear strength and estimated wood failure values. All plywood made with the residue filler were comparable to the control-bonded plywood. These results indicate that residue from the newsprint waste streams would be suitable as filler for plywood adhesives.

• 펄프종이기술
• /
• 제36권2호
• /
• pp.54-59
• /
• 2004

The methods for the minimization of fresh water consumption, waste water generation and water contamination have been greatly investigated and developed for last ten years. Recently, the rising cost of waste water treatment and the more strict environmental regulation lead to the higher demand of more efficient and systematic methods for process water management. The water reuse technology, which not only reduce the process water needs but also minimize waste water generation within the process, could be one of most efficient way for current demand. In this study, the practical way for reduction of water pollution and optimal reuse or recycle of process water in a newsprint mill was investigated by using a simulation model. The result of computer simulation showed that the COD level of approach system could be reduced by 50% after the stock concentration at the 2nd disc filter was increased upto 30%. The application of WRDF(Wrinkled Rotary Drum Filter) to the newsprint mill was carried out with pilot scale. The process water treated by WRDF had enough cleanliness to substitute the forming fabric shower water with the PDF water, which could result in the 30% reduction in fresh water consumption.

• 펄프종이기술
• /
• 제39권3호
• /
• pp.1-11
• /
• 2007

To evaluate the quality of waste paper used for the manufacture of linerboard, the types of papers and foreign materials in compressed waste paper currently used were investigated. The recycled fibers were obtained from printing paper, newspaper, wrapping paper, white coated paperboard and corrugated container. Their fibers were observed by using a microscope, and the mechanical properties of the recycled papers manufactured from the recycled fibers were investigated. The compressed wastepaper was composed of 54% paperboard, 20% printing paper, and 20% newsprint. The content of foreign materials was about 4%, showing higher contents compared to 1% of foreign substances provided by Korea paper manufacturers' association. The types of foreign materials were various, which include vinyls, plastics, metals, woods, styrofoams, and cloths. Sound fibers were generally observed in the recycled fibers of printing papers and wrapping paper. The recycled fibers of white coated board, corrugated container and newsprint showed to be generally damaged. The whiteness of each recycled fiber were highly affected by pulp bleaching and ink-particle mixing conditions. The values of breaking length and burst index were lower than those for corrugating medium and liner board specified in KS. Although the anatomical characteristics of recycled fibers varied, their strengths appeared to be similar. This result may be explained by the use of non-deinked fiber.

• Journal of the Korean Wood Science and Technology
• /
• 제22권4호
• /
• pp.7-12
• /
• 1994

In recent years, the municipal wastes recognized resources. This study was performed to survey the changes of main components of the pretreated(chemical, physical) lignocellulosic biomass. The result can be summerized as follows; In pulp fiber composition, newsprint and corrugating container were mainly consist of softwood fiber(tracheid). But computer print out and magazine had a large amount of hardwood fiber(wood fiber). And, carbohydrate content in the various lignocellulosic biomass increases as the following orders : Magazine < Newsprint < Corrugating container < Computer print out. In the chemical pretreatments for the delignification, sodium hypochlorite pretreatment was more effective than sodium hydroxide. By washing, ash content of lignocellulosic biomass was decreased. Physical pretreatments were less effective than chemical pretreatment for the delignification. On the other hand, in physical pretreatments, ash content of lignocellulosic biomass was the same tendency as in the chemical pretreatments.

• 에너지공학
• /
• 제27권2호
• /
• pp.81-88
• /
• 2018

Every day a huge amount of paper is being used, most of them are thrown after using. This directly impacts on the environment. Therefore, waste paper management is necessity to protect the environment from its annihilation and pollution. Paper recycling products consist of printing paper, newspaper, corrugated containers, magazine paper and so on. Reuse waste paper will reduce the consumption of wood and virgin pulp as recycling one ton of newsprint can save approximately 1 ton of wood, meanwhile recycling 1 ton of printing paper can save more than 2 tons of wood. With increasing recycling rates, lower quality paper fractions may be included. Thus the selection of a paper recycling technology is a crucial first design consideration. The paper recycling must be accompanied by appropriate technology to manage a huge volume of wastepaper. The specific objectives of this study were as follows: (1) comprehensive literature reviews of paper production and consumption, (2) figure out about paper recovery and utilization, (3) investigate the paper recycling in the sustainable times, (4) introduce eco-friendly recycling technology to paper industry.

• 한국산림과학회지
• /
• 제83권2호
• /
• pp.133-147
• /
• 1994

폐지의 재활용은 부족한 제지원료의 조달 뿐 아니라, 많은 환경문제를 야기하고 있는 쓰레기의 감량, 에너지 절약 및 임목자원 절약 등과 관련하여도 중요한 의미를 갖고 있다. 이 연구는 (1)국내폐지의 수요 및 공급함수를 추정하고 (2)이들 모델을 이용하여 폐지의 수급을 예측하였으며 (3)모델에 포함된 변수들의 수요(需要) 공급탄력성(供給彈力性)을 추정함으로써 폐지의 재활용을 촉진시킬 수 있는 정책수립의 기초자료제공을 위하여 수행되었다. 이 연구에서는 폐지를 폐신문지, 폐골판지 및 기타 잡폐지의 3가지로 구분하여 각각의 수요 공급함수를 추정하였는 바, 수요함수는 종이 종이제품의 생산량 및 도매물가지수의 함수로 추정되었으며, 공급함수는 폐지의 가격, 전년도 종이 종이제품의 수요량 및 운송비의 함수로 추정되었다. 폐지의 총수요량은 1990년 3,342천톤에서 2000년에는 11,645천톤으로 약 3.5배 증가할 것으로 예측되었으며, 공급량은 1990년 총 1,875천톤에서 2000년에 약 7,396천톤으로 추정되었다. 총 폐지의 자급율은 2000년에 평균 약 63.5%에 이를 것으로 예측되었으나 폐신문지의 자급율은 16%로 추정되어 2000년에는 약 2,205천톤의 폐신문지를 외국에서 수입하여야 할 것으로 예측되었다. 끝으로 현재 폐지재활용에 관한 문제점을 제시하고 폐지가 갖고 있는 경제적 물리적 특성 및 구명된 폐지시장의 수급구조를 바탕으로 재활용을 촉진할 수 있는 몇가지 방안을 제시하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권3호
• /
• pp.203-212
• /
• 2005

섬유질 단열재는 주로 폐신문지로 만드는 데, 내화성능을 위해 내화재로 처리된다. 내화재로 인해 연소가 되지 않을 뿐 아니라, 연기도 나지 않는다. 섬유질 단열재의 열저항은 유리섬유나 암면보다 더 뛰어나다. 섬유질 단열재는 폐지로 만들어지므로 폐기시에는 잘 부식되고, 내재에너지 또한 매우 작은 친환경 단열재이다. 국내 건축물에 섬유질 단열재를 광범위하게 이용하기 위해서는 국내 건축법규 상의 단열규정에 적합한지 여부를 판단할 수 있는 물리적 성능 테스트가 필요하다. 따라서 국내에서 생산되는 섬유질 단열재에 대한 열전도율 및 내화성능 실험을 ASTM C 518과 ASTM C 1485에 근거하여 실시하였다. 국내생산 섬유질 단열재는 동일밀도의 미국제품에 비해 열전도율이 약 5%정도 높게 나타났다. 이러한 결과는 폐지원지의 섬유질이 서로 다른데서 기인하는 것으로 판단된다. 습식분사방식과 공기충진방식 모두 온도가 $5.5^{\circ}C$ 상승할 때 마다 약 1.5%씩 열전도율이 높아지는 것으로 나타났다. 섬유질 단열재의 내화성능은 내화재의 함유량에 비례하여 일정하게 증가되는 것으로 나타났다. 높은 내화성능으로 인해 불에 약한 우레탄폼이나 스치로폼을 대체할 수 있다. 섬유질 단열재의 열전도율은 시편의 온도가 $4-43^{\circ}C$인 경우 $0.037-0.043W/m{\cdot}K$로 나타났다. 이는 국내 건축법규 상의 "나"등급에 해당하는 값이다. 내화재가 열전도율에 미치는 영향은 미미하였으며, 내화재가 전혀 들어있지 않은 경우가 가장 열전도율이 높게 나타났다. 섬유질 단열재의 단열성능은 유리섬유나 암면에 비해 뛰어나고, 스치로폼이나 우레탄폼에 비해 내화성능은 훨씬 뛰어나다. 따리서, 물리적인 성능을 고려한다면 위의 기존 단열재들을 대체할 수 있다. 섬유질 단열재는 스치로폼이나 우레탄폼에 비해 값도 싸므로 국내에서도 더욱 폭 넓게 사용하는 것이 추천된다.