• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.6
• /
• pp.1043-1051
• /
• 2017

Asphalt overlay on deteriorated concrete pavement has a problem of early damage due to reflective cracking. There is a need for a new method capable of reducing reflection cracking and ensuring the durability of pavement. The purpose of this study was to obtain durability of asphalt overlay with stress absorbing membrane interlayer (SAMI) using epoxy asphalt binder. The tensile performance, durability, water resistance and bonding performance of Epoxy-SAMI were evaluated by various tests. As a result of tests, Epoxy-SAMI meets the quality standard of the bridge waterproofing material. The repeated direct tensile test was carried out to investigate the effect of reflective cracking reduction. When the Epoxy-SAMI was applied, it had 1.2~1.56 times higher reflective cracking resistance than PSMA asphalt concrete with the thickness of 10cm even if the section thickness decreased. 4-point bending beam test results showed the number of fatigue failures increased 7.5 times when Epoxy-SAMI was applied. The Epoxy-SAMI was found to be effective in improving the durability of the asphalt pavement overlay because it serves to prevent reflective cracking, increase lifespan, and function as a waterproof layer.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.5
• /
• pp.2605-2610
• /
• 2016

The International Myeloma Working Group considers the serum free light chain (SFLC) assay to be an adjunct to traditional tests. Apart from the FLC ratio, the absolute values of individual free light chains also are gaining importance as they appear to be more relevant in certain clinical settings. Automated assays are available for their determination. As laboratories put new test systems into use catering to different disease populations, they are required by accreditation and certification bodies to verify or establish performance specifications, including reference intervals (RIs) representative of their population. Our aim was to establish local RIs for SFLC in a multicentre representative healthy population using a robust method. There was no significant relationship between SFLC levels and age, gender and creatinine levels. The 95% RI for ${\kappa}SFLC$ was 4.81 to 33.86mg/L, for ${\lambda}$ SFLC was 5.19 to 23.67mg/L and for ${\kappa}/{\lambda}SFLC$ was 0.36 to 2.33, significantly higher than the values given by the manufacturer. The ${\kappa}/{\lambda}$ SFLC ratio at 2.23, covering 100% of the data, showed 72% sensitivity (95% CI=39.0 - 94.0), 100% specificity (95% CI=71.5 - 100.0), 100% PPV (95% CI=21.5 - 100.0), 95% NPV (95% CI=75.4 - 99.9), and 79% accuracy (95% CI=56.0 - 93.0). In the patient group, kit RI for ${\kappa}/{\lambda}$ SFLC ratio classified 45.5% (n=5) as positive vs 9.1% (n=1) positive by the study RI, while the kit RI for kappa FLC classified 90.9% (n=10) as positive vs 54.5% (n=6), indicating increased probability of false positive test results with the kit RI when applied to our patient population. Appropriate and specific reference intervals and criteria values result in fewer false-positive and false-negative results which means fewer wrong or missed diagnoses.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.225-234
• /
• 2006

Product designers sketch various ideas of foreground figures(detail design) onto background figures(basic form) and evaluate numerous combinations of them in the late stages of design process. Designers have to test their ideas elaborately with a high-fidelity physical model that looks like a real product. However, due to the requirements of time and expense in making high-fidelity design models, it is impossible to evaluate such a number of combinatorial solutions of background and foreground figures. Contrary to digital models, physical design models are not easily modifiable and so designers cannot easily develope ideas through iterative design-evaluation process. To address these problems, we proposed a new concept 'Augmented Plasticity' that gives morphological editability to a rigid physical object using Augmented Reality technology and implemented the idea as Digital Skin system. Digital Skin system figures out the position and orientation of object surface with ARToolKit visual marker and superimposes a deformed surface image seamlessly using differential rendering method. We tried to apply Digital Skin system to detail design, redesign of product, and material exploration task. In consequence, it was found that Digital Skin system has potential to allow designers to implement and test their ideas very efficiently in the late stages of design process.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1247-1247
• /
• 2001

Constituents of animal biofluids such as milk, blood and urine contain information specifically related to metabolic and health status of the ruminant animals. Some changes in composition of biofluids can be attributed to disease response of the animals. Mastitis is a major problem for the global dairy industry and causes substantial economic losses from decreasing milk production and reducing milk quality. The purpose of this study was to investigate potential of NIRS combined with multivariate analysis for cow's mastitis diagnosis based on NIR spectra of milk, blood and urine. A total of 112 bulk milk, urine and blood samples from 4 Holstein cows were analyzed. The milk samples were collected from morning milking. The urine samples were collected before morning milking and stored at -35$^{\circ}C$ until spectral analysis. The blood samples were collected before morning milking using a catheter inserted into the carotid vein. Heparin was added to blood samples to prevent coagulation. All milk samples were analyzed for somatic cell count (SCC). The SCC content in milk was used as indicator of mastitis and as quantitative parameter for respective urine and blood samples collected at same time. NIR spectra of blood and milk samples were obtained by InfraAlyzer 500 spectrophotometer, using a transflectance mode. NIR spectra of urine samples were obtained by NIR System 6500 spectrophotometer, using 1 mm sample thickness. All samples were divided into calibration set and test set. Class variable was assigned for each sample as follow: healthy (class 1) and mastitic (class 2), based on milk SCC content. SIMCA was implemented to create models of the respective classes based on NIR spectra of milk, blood or urine. For the calibration set of samples, SIMCA models (model for samples from healthy cows and model for samples from mastitic cows), correctly classified from 97.33 to 98.67% of milk samples, from 97.33 to 98.61% of urine samples and from 96.00 to 94.67% of blood samples. From samples in the test set, the percent of correctly classified samples varied from 70.27 to 89.19, depending mainly on spectral data pretreatment. The best results for all data sets were obtained when first derivative spectral data pretreatment was used. The incorrect classified samples were 5 from milk samples,5 and 4 from urine and blood samples, respectively. The analysis of changes in the loading of first PC factor for group of samples from healthy cows and group of samples from mastitic cows showed, that separation between classes was indirect and based on influence of mastitis on the milk, blood and urine components. Results from the present investigation showed that the changes that occur when a cow gets mastitis influence her milk, urine and blood spectra in a specific way. SIMCA allowed extraction of available spectral information from the milk, urine and blood spectra connected with mastitis. The obtained results could be used for development of a new method for mastitis detection.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.287-293
• /
• 2019

Domestic thermal power plant fly ash is at a situation which emissions are increasing every year. Comparing to Fly Ash, Bottom Ash is only 15 %, but it's recycling rate is low, so most of them is being buried in the ground. However, landfill site of every power plant is full, and the construction of a new landfill is difficult. To solve this problem, the best solution is to use Bottom Ash as a landfill of large-scale civil engineering projects. The purpose of this study was to investigate the compression strength behavior characteristics of weak clay and uniaxial compression test to examine the applicability of surface soil solidification method of mixed soils mixed with industrial waste coal ash and weak clay which is buried in bulk. As a result of the test, the fluidity of the Mixed soil with clay + bottom ash + cement was improved to 200 mm at the water content of 91-92 %. The uniaxial compressive strength was also good for the mixed soils (clay + bottom ash + cement) meeting the required strength of 159 kN/㎡ at 28 days. However, the other samples did not meet the required strength. In this study, the prediction equations for the compression strength behavior by cement and curing period were presented.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.2
• /
• pp.89-96
• /
• 2000

Slug tests are the most widely used field method for quantification of hydraulic conductivity of porous media. Well recovery is affected by well casing, borehole radii, screened length, hydraulic conductivity, and specific storage of porous media. In this study, a new slug tests model was developed through finite element approximation and the validity and usefulness of the model were tested in various ways. Water level fluctuation in a well under slug test and cons-equent groundwater flow in the surrounding porous medium were appropriately coupled through estimation of well-flux using an iteration technique. Numerical accuracy of the model was verified using the Cooper et al. (1967) solution. The model has advantages in simulations for monitored slug tests, partial penetration, and inclusion of storage factor. Volume coverage of slug tests is significantly affected by storage factor. Magnitude and speed of propagation of head changes from a well increases as storage factor becomes low. It will be beneficial to use type curves of monitored head transients in the surrounding porous formation for estimation of specific storage. As the vertical component of groundwater flow is enhanced, the influence of storage factor on well recovery decreases. For a radial-vertical flow around a partially penetrated well, deviations between hydraulic estimates by various methods and data selection of recovery curve are negligible on practical purposes, whereas the deviations are somewhat significant for a radial flow.

• Journal of the Korean Society for information Management
• /
• v.33 no.1
• /
• pp.161-180
• /
• 2016

Physicians have information needs related to academic research and clinical practice but encounter difficulties seeking appropriate medical resources and information. The goal of this study is to develop a search system to support Korean physicians' information needs. To access sources to meet the identified need, in-depth interviews were conducted, and MediSearching, a new search system, was developed accordingly. To verify its usefulness and to obtain users' suggestions, interviews were conducted and feedback was solicited via collected test searches. The initial set of interviews indicated that physicians' information needs and search behaviors differed by type of hospital and clinical department. Physicians in university hospitals with a greater need for research materials searched for academic articles, whereas physicians in specialty hospitals or primary care clinics with a stronger need for materials related to clinical practice asked their colleagues for information. Consequently, MediSearching was designed to satisfy both groups' needs, and the test search provided useful search results compared with existing services. Korean physicians have previously had to repeat their search process on separate sites that provide different services according to type of information and search method. MediSearching may reduce this inconvenience and add documents in various formats and languages.

• The Journal of Korean Medicine
• /
• v.27 no.2 s.66
• /
• pp.145-154
• /
• 2006

Objectives : Methods to evaluate obesity are growing to be important in studying links between health and disease. Physicians are using BMI (body mass index) to evaluate obesity, but they can't know how much fat the body has by using that method. Even though there are several assessments, there are different scales, so patients are diagnosed as obese, by some but not by others. These studies are limited in evaluating obesity; it is necessary to study based on new knowledge. According to Oriental Medical Theory, obese people are categorized into 3 types, Fei, Kao and Liu Ren. They have different pathology and body shapes than non-obese people. The relationship between Oriental Medical Theory and BMI and assessment of body fat is a fundamental need to easily approach and treat obesity. Methods : At 00 Oriental Medical Center, 145 female subjects who intended to lose weight were given physical tests and grouped into 5 types of obesity. The physical tests were height measurement, BMI, body composition (body fat mass and lean body mass), skin elasticity and physical strength tests. One-way analysis of variance was done to compare the means of physical tests between the five types of obese women. There was some relationship between characteristics of the five types based on physical tests and Fei, Kao and Liu Ren based on Oriental Medical Theory. Least significant difference (LSD) was used in multiple comparisons. Results : 1. According to the skin elasticity test, obesity type 5 placed between obesity types 3 and 4 and obesity types 1 and 2. Obesity types 3 and 4 were in the low skin elasticity result group; obesity types 1 and 2 were in the high ones (p<0.1).Based on Oriental Medical Theory, Fei Ren and Kao Ren can be distinguished by skin elasticity degree. This result should form the basis of obesity diagnosis. 2. According to Oriental Medical Theory, Fei Ren is smaller than others. Based on height measurement, obesity types 3 and 4 were significantly lower than other obesity types (p<0.1), so there is a relationship between Fei Ren and obesity types 3 & 4. 3. There were significant differences between obesity type 2 and obesity type 4 in the body fat mass result (p<0.1). This study did not have large enough a sample size to distinguish Liu Ren. Conclusions : Further clinical research is necessary to study measurement methods of body shape type and skin elasticity for distinguishing Fei Ren from Kao Ren. The diagnosis and treatment based on the relationship of these types should be studied further.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.205-214
• /
• 2015

Rapid urbanization and industrialization have caused increased demand for underground structures such as cable, and other utility tunnels. Recently, it has become very difficult to construct new underground structures in downtown areas because of civil complaints, and engineering problems related to insufficient information about existing underground structures, cable tunnels in particular. This lack of information about the location and direction-of-travel of cable tunnels is causing many problems. To solve these problems, this study was focused on the use of geophysical exploration of the ground in a way that is theoretically, different from previous electrical resistivity surveys. An electric field analysis was performed on the ground with cable tunnels using Gauss' law and the Laplace equation. The electrical resistivity equation, which is a function of the cable tunnel direction, the cable tunnel location, and the electrical conductivity of the cable tunnel, can be obtained through electrical field analysis. A field test was performed for the verification of this theoretical approach. A field test results provided meaningful data.

• The Korean Journal of Pesticide Science
• /
• v.6 no.4
• /
• pp.271-278
• /
• 2002

Methanol extracts from 420 samples of 173 plant species in 58 families were tested at 5000 ppm for their insecticidal and acaricidal activities against five economically important arthropod pests by spray method. The responses varied with arthropod pest species, plant species and plant tissue sampled. In a test with Nilaparvata lugens Stal, extracts from Zanthoxylum piperitum barks, Chamaecyparis obtusa leaf and Quercus salicina leaf showed potent insecticidal activity. With Plutella xylostella L., potent larvicidal activity was observed from extracts of Platycarya strobilacea wood, Meliosma myriantha barks, Sophora japonica leaf, Zanthoxylum piperitum barks, and Pinus thunbergii wood. Methanol extracts of Sophora japonica leaf and Zanthoxylum piperitum barks showed high insecticidal activity against Spodoptera litura. In a test with Tetranychus urticae Koch, extract from Carpinus coreana leaf, Firmiana simplex barks, Elaeagnus macrophylla leaf, Aralia elata leaf, Comus controversa barks and Chamaecyparis obtusa leaf exhibited strong acaricidal activity. As a naturally occurring pest control agent, Zanthoxylum piperitum barks could be useful as new insecticidal and acaricidal products against various arthropod pests.