• 한국공간구조학회논문집
• /
• 제22권2호
• /
• pp.29-37
• /
• 2022

The collapse of reinforced concrete (RC) frame buildings is mainly caused by the failure of columns. To prevent brittle failure of RC column, numerous studies have been conducted on the seismic performance of strengthened RC columns. Concrete jacketing method, which is one of the retrofitting method of RC members, can enhance strength and stiffness of original RC column with enlarged section and provide uniformly distributed lateral load capacity throughout the structure. The experimental studies have been conducted by many researchers to analyze seismic performance of seismic strengthened RC column. However, structures which have plan and vertical irregularities shows torsional behavior, and therefore it causes large deformation on RC column when subjected to seismic load. Thus, test results from concentric cyclic loading can be overestimated comparing to eccentric cyclic test results, In this paper, two kinds of eccentric loading pattern was suggested to analyze structural performance of RC columns, which are strengthened by concrete jacketing method with new details in jacketed section. Based on the results, it is concluded that specimens strengthened with new concrete jacketing method increased 830% of maximum load, 150% of maximum displacement and changed the failure modes of non-strengthened RC columns.

• 대한토목학회논문집
• /
• 제26권6D호
• /
• pp.961-968
• /
• 2006

도로의 가장자리에 설치되는 경계석과 측구는 교통사고로부터 보행자를 보호하고 강우로 인한 차량의 미끄러짐을 방지하는 중요한 구조물이다. 그러나 경계석과 측구를 시공함에 있어 대부분의 공정을 인력으로 수행하는 기존 시공법은 작업성과 시공품질, 시공비 등의 측면에서 많은 문제점을 안고 있다. 본 연구에서는 기존 시공법이 갖고 있는 많은 문제점들을 해결할 수 새로운 시공법을 개발하였다. 새로운 공법으로 시공된 경계석과 측구의 구조적인 안정성과 시공품질을 확인하기 위하여 기존공법과 신공법으로 시공된 경계석에 대해서 인발과 수평재하시험을 실시함과 동시에 기존공법과 신공법으로 시공된 측구에서 채취된 콘크리트 시편에 대해 일축압축시험도 실시하였다. 시험결과 신공법으로 시공된 경계석의 선형과 측구콘크리트의 강도는 크게 향상되었으며, 신공법으로 시공된 경계석의 인발 및 수평저항력은 기존공법으로 시공된 경우보다 각각 10.7배와 2.5배 큰 것으로 나타났다.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권9호
• /
• pp.431-439
• /
• 2001

This Paper illustrates a new numerical analysis method using a nodal effective load model for nodal probabilistic production cost simulation of the load point in a composite power system. The new effective load model includes capacities and uncertainties of generators as well as transmission lines. The CMELDC(composite power system effective load duration curve) based on the new effective load model at HLll(Hierarchical Level H) has been developed also. The CMELDC can be obtained from convolution integral processing of the outage capacity probabilistic distribution function of the fictitious generator and the original load duration curve given at the load point. It is expected that the new model for the CMELDC proposed in this study will provide some solutions to many problems based on nodal and decentralized operation and control of an electric power systems under competition environment in future. The CMELDC based on the new model at HLll will extend the application areas of nodal probabilistic production cost simulation, outage cost assessment and reliability evaluation etc. at load points. The characteristics and effectiveness of this new model are illustrated by a case study of MRBTS(Modified Roy Billinton Test System).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.265-268
• /
• 2000

In this study, a small punch creep (SP-Creep) test using miniaturized specimen has been described for the development of the new creep test method for high temperature structural components such as headers and tubes of boiler, turbine casing and rotor, and reactor vessel. The SP-Creep testing technique has been applied to 1Cr-0.5Mo steel used widely as boiler header material and the creep test temperature are varied at $550^{\circ}C{\sim}600^{\circ}C$. From the experimental results, e.g. SP-Creep curve behaviors, the creep rate in steady state and creep rupture life with test temperature and load, the load exponential value(n, m), the activation energy($Q_{spc}$), the Monkman-Grant relation and the creep life assessment equation etc., it can be summarized that the SP-Creep test may be a useful test method to evaluate the creep properties of the heat resisting material such as boiler header.

• Journal of the Korean Data and Information Science Society
• /
• 제9권2호
• /
• pp.95-103
• /
• 1998

회귀모형의 선형성을 검정하는 방법으로서 Azzalini와 Bowman은 회귀모형의 오차항이 정규분포를 따른다는 가정하에서 커널회귀추정량을 이용한 유사우도비 검정이라는 비모수적 방법을 제안하였다. 붓스트랩(bootstrap)기법을 도입하여 그들의 검정방법을 변형한 커널붓스트랩검정이라는 새로운 검정법을 제시하고 모의실험을 통해 검정력을 살펴보았다. 제안된 방법은 오차항의 분포가 정규분포가 아닌 경우에도 적용이 가능하였다.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.157-161
• /
• 2007

There are technological changes to reduce the size and weight of electronic components and to accommodate multi-functions in them. To meet this trend, more complicated technological processes are required. To maintain the processes, more accurate inspection systems are also necessary. Therefore, new inspection methods are needed, which is differ from conventional inspection methods such as electrical test methods ICT(In-Circuit Test), FCT(Function Test) and visual test using optical equipments. One of the possible approaches is non-destructive test using X-ray. In this paper, an inspection method using X-ray is developed and applied to inspection of soldering state and internal defects of electronic components.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(I)
• /
• pp.187-191
• /
• 2003

Aluminum carbody for rolling stocks is light and perfectly recycled, but includes severe defects which are very dangerous to fatigue strength. Static load test has been performed up to date to assess structural safety of the carbody. However, static load test is not sufficient to evaluate fatigue strength of the carbody, because fatigue failure is caused by dynamic load. In this study, the established load test methods for carbody are described and the characteristics of the methods are discussed. Also, a testing method to simulate dynamic loading condition is proposed for evaluation of fatigue strength of the carbody The results by the proposed testing method are compared with the results by the static load test and new findings are discussed.

• Journal of electromagnetic engineering and science
• /
• 제6권4호
• /
• pp.217-221
• /
• 2006

Multipactor-free S-band duplexer based on inter-digital cavity type filter is proposed and demonstrated by in-house mulitpactor test facility for satellite RF components. Multipactor sensitivity of designed duplexer is analyzed by checking it out the maximum field accumulated region inside duplexer and calculating the electric field intensities at each resonator using 3D EM simulation in order to restrict the minimum gap distance as 2.5 mm which handles 43.13 dBm RF input power. Multipactor threshold was finally detected at 44 dBm in experiment for pulse mode test. The developed multipactor test method is cost effective, simple structure and gives a good agreement compared with the previous high cost MP test methodologies.

• 전자공학회논문지B
• /
• 제32B권11호
• /
• pp.1434-1444
• /
• 1995

Current test has recently been known to be a promising testing method in CMOS VLSI because conventional voltage test can not make sure of the complete detection of bridging, gate-oxide shorts, stuck-open faults and etc. This paper presents a new BIC(built-in current sensor) for the internal current test in CMOS logic circuit. A single phase clock is used in the BIC to reduce the control circuitry of it and to perform a self- testing for a faulty current. The BIC is designed to detect the faulty current at the end of the clock period, so that it can test the CUT(circuit under test) with much longer critical propagation delay time and larger area than conventional BICs. The circuit is composed of 18 devices and verified by using the SPICE simulator.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권2호
• /
• pp.107-119
• /
• 2009

Reliability tests should be designed to verify whether reliability requirements are satisfied or not effectively and efficiently. The portion of reliability requirements that a reliability test scheme composed of different types of tests can cover is defined as test coverage in software engineering. For the cases of hardwares, to be effective, a reliability test scheme should enhance the test coverage. This study is to develop an evaluation method of test coverage for a reliability test scheme proposed for new products. Case studies are also given.