• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.180-186
• /
• 2000

This paper presents a new winding method in the electronic descaling(ED) technology. The ED technology Produces an oscillating electric field via the Faraday's law to Provide necessary molecular agitation to dissolved mineral ions. But present method gives another agitation force to mineral ions, which is Lorentz's force. Experiments were peformed at various Renolds number. A series of tests was conducted, measuring pressure drop across test section and the overall heat transfer coefficient as a function of time. In order to accelerate the rate of fouling, artificial hard water of 1000ppm $CaCO_3$ was used throughout the tests. The results show that the new method accelerates collision of mineral ions and improvs efficiency of system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.150-152
• /
• 1999

This paper presents a new generator grouping method for speed-up of transient stability evaluation in SIME. The critical generators are grouped by new indices in the early stage of time domain simulation. And the simulation can be early terminated by fast stability evaluation using the time trajectory of equivalent one machine infinite bus. The main advantage of the proposed method is that it can be applied to stable cases as well as unstable ones. The effectiveness of the proposed method is tested on the PSS/E test system.

• 정보처리학회논문지D
• /
• 제18D권5호
• /
• pp.343-356
• /
• 2011

기존의 GUI 테스트 도구들은 테스트 케이스 준비 및 테스트 수행시 테스터의 개입을 많이 요구한다. 이러한 문제를 개선하기 위해 본 논문에서는 GUI 테스트 케이스를 구축할 수 있는 새로운 방법을 제안한다. 이 방법은 GUI 내에서 잠재적인 제어 흐름을 식별하여 GUI맵을 구성하는 방법이다. .NET Framework에서 제공하는 UIA 라이브러리는 GUI 컨트롤 정보를 추출하는 과정에 사용되며, 이를 통해 GUI맵을 구성한다. 추출된 GUI 컨트롤 정보를 기반으로 그룹화 매커니즘을 사용하여 테스트 시나리오를 생성한다. 다양한 테스트 시나리오는 어떤 GUI 컨트롤에 대해 그 컨트롤이 속하는 그룹에서 다른 컨트롤을 선택하여 그것을 대체함으로써 자동 생성된다. 기존의 GUI 테스트 도구들은 테스트 커버리지를 지원하지 않았지만, 이 논문에서 제안하는 방법은 GUI맵을 사용하여 실행되었거나 실행되지 않은 시나리오 흐름을 파악할 수 있으므로 이를 통해 테스트 커버리지를 측정할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1008-1011
• /
• 1996

Most control systems of power plants are using classical PID controllers for their process control. In order to get the desired control performances, the correct tuning of PID controllers is very important. Sometimes, it is necessary to retune PID controllers after the change of system operating condition and system design change, etc. Commercial auto-tuning controllers such as relay feedback controller can be used for this purpose. However, using these controllers to the safety-critical systems of nuclear power plants may be cause of unsafe operation, because they are using test signals for tuning. A new system identification auto-tuning method without using test signal has been developed in this paper. This method uses process input/output signals for system identification of unknown control process. From the model information of control process which was obtained from system identification approach, the optimal PID parameters can be calculated. The method can be used in the safety-critical systems because it is not using test signals during system modeling process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.24-29
• /
• 1996

The purpose of this study is to propose new estimation method of unit cement content in hardened concrete. In general, the quantity of cement in hardened concrete is tested by hydrochlonic acid dissolving cement paste, however, hydrochloric acid dissolves sea shell contained in sea sand and lime stone in concrete. Therefore, the tested cement content is apt to estimate greater than actual cement content. The sodium gluconate solution dissolves only cement in concrete, it is hard to dissolve sea shell and lime stone as CaCo3. The effects of the quantity, concentration and temperature of sodium gluconate solution, the ignition temperature, the ignition loss of cement on the cement content and the percentage of dissolution of cement were investigated to establish a test method. From the results of these tests, the fundamental test method for cement content of hardened concrete by sodium gluconate is proposed.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.254-257
• /
• 2004

Both ground and space telescopes are being built larger and larger. Accordingly, the secondary mirrors become larger which are convex mostly on the surface form. Testing convex mirrors becomes more difficult and delicate than testing concave mirrors in optics, because additional optical components are needed to make the reflected rays converge. Hindle type tests are frequently used for measuring the surface deforms of convex mirrors, which employs a meniscus lens to reverse the diverted rays from the mirrors. In case of testing large convex mirrors by using Hindle type tests, attention would be needed as larger meniscus lens is required. A method of modified Hindle test has been studied and the characteristics are analyzed. In this paper, current method of testing convex mirrors is presented, and a new method is discussed.

• Structural Engineering and Mechanics
• /
• 제71권4호
• /
• pp.391-405
• /
• 2019

Compared to the ambient vibration test mainly identifying the structural modal parameters, such as frequency, damping and mode shapes, the impact testing, which benefits from measuring both impacting forces and structural responses, has the merit to identify not only the structural modal parameters but also more detailed structural parameters, in particular flexibility. However, in traditional impact tests, an impacting hammer or artificial excitation device is employed, which restricts the efficiency of tests on various bridge structures. To resolve this problem, we propose a new method whereby a moving vehicle is taken as a continuous exciter and develop a corresponding flexibility identification theory, in which the continuous wheel forces induced by the moving vehicle is considered as structural input and the acceleration response of the bridge as the output, thus a structural flexibility matrix can be identified and then structural deflections of the bridge under arbitrary static loads can be predicted. The proposed method is more convenient, time-saving and cost-effective compared with traditional impact tests. However, because the proposed test produces a spatially continuous force while classical impact forces are spatially discrete, a new flexibility identification theory is required, and a novel structural identification method involving with equivalent load distribution, the enhanced Frequency Response Function (eFRFs) construction and modal scaling factor identification is proposed to make use of the continuous excitation force to identify the basic modal parameters as well as the structural flexibility. Laboratory and numerical examples are given, which validate the effectiveness of the proposed method. Furthermore, parametric analysis including road roughness, vehicle speed, vehicle weight, vehicle's stiffness and damping are conducted and the results obtained demonstrate that the developed method has strong robustness except that the relative error increases with the increase of measurement noise.

• 천문학회보
• /
• 제44권1호
• /
• pp.78.2-78.2
• /
• 2019

We develop an Alcock-Paczynski (AP) test method that uses the evolution of redshift-space two-point correlation function (2pCF) of galaxies. The method improves the AP test proposed by Li et al. (2015) in that it uses the full two-dimensional shape of the correlation function. Similarly to the original method, the new one uses the 2pCF in redshift space with its amplitude normalized. Cosmological constraints can be obtained by examining the redshift dependence of the normalized 2pCF. This is because the 2pCF should not change apart from the expected small non-linear evolution if galaxy clustering is not distorted by incorrect choice of cosmology used to convert redshift to comoving distance. Our new method decomposes the redshift difference of the 2-dimensional correlation function into the Legendre polynomials whose amplitudes are modelled by radial fitting functions. The shape of the normalized 2pCF suffers from small intrinsic time evolution due to non-linear gravitational evolution and change of type of galaxies between different redshifts. It can be accurately measured by using state of the art cosmological simulations. We use a set of our Multiverse simulations to find that the systematic effects on the shape of the normalized 2pCF are quite insensitive to change of cosmology over \Omega_m=0.21 - 0.31 and w=-0.5 - -1.5. Thanks to this finding, we can now apply our method for the AP test using the non-linear systematics measured from a single simulation of the fiducial cosmological model.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1207-1208
• /
• 2006

We developed the copper core ball electroplated with Sn-Ag-Cu of the eutectic composition which used mostly as Pb free solder ball with high reliability. In order to search for the practicality of this developed copper core ball, the evaluation was executed by measuring the initial joint strength of the sample mounted on the substrate and reflowed and by measuring the joint strength of the sample after the high temperature leaving test and the constant temperature and the humidity leaving test. This evaluation was compered with those of the usual other copper core balls electroplated with (Sn,Sn-Ag,Sn-Cu,Sn-Bi) and the Sn-Ag-Cu solder ball.

• Advances in aircraft and spacecraft science
• /
• 제5권2호
• /
• pp.177-186
• /
• 2018

This paper deals with the idea to replace the usual high-level sine sweep test on shaker at system level, very severe, by a low level one completed by a transient test in the same configuration, in order to be more representative of the real environment, thus limiting over testing and improving the payload comfort. The problem of the transient test specification is first discussed. The proposed solution is to derive from LV/SC coupled analyses a shock response spectrum corresponding to two damping ratios. Then, the question of adequate shock synthesis is tackled. A new method with a given spectrum is considered for better potential and accuracy than the usual wavelets. A campaign on the Intespace bi-shaker devoted to system level showed its capability to perform the resulting test with one spectrum. First investigations to extend this approach to two spectra are in progress.