• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1439-1441
• /
• 2000

In this paper, for IGBT inverter of electric car studied new vibration test method. It made a partial amendment of the existing standard. Using new vibration test method is tested actually IGBT inverter. The result on vibration test for IGBT inverter shows an excellent performance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1679-1688
• /
• 2008

Recently, the bogie frame weight of Light Rail Transit system has been reduced in order to save energy and materials. However, this light weighted vehicle structure is very important to verify the fatigue strength at the development stage. Bogie system consists of bogie frame, suspensions, wheel-sets, braking system and transmission system. Among these components, the bogie frame is most significant component subjected to the whole vehicle and passenger loads. In this study, the bogie frame for the New LRT power car is evaluated to the static and fatigue strength. And the evaluation method is used the LRT Performance Test Standards Specification throughout the FEM analysis and static load test. The static and fatigue test results for the LRT bogie frame of power car has been appeared very safety and stable for the design load conditions.

• 한국통신학회논문지
• /
• 제33권1B호
• /
• pp.38-47
• /
• 2008

다양한 소프트웨어 기능들에 대해서 활발한 시장의 요구사항에 부응하기 위해서는 주어진 납기에 시스템시험을 마쳐야 한다. 특히, 사용자나 개발목표 시스템의 주요 핵심기능과 밀접한 주요 고장들은 시스템시험에서 반드시 검출, 제거되어야 한다. 대부분 제안되고 있는 시스템시험 방법은 효율적이고 가격 경쟁력을 갖춘 선택적인 시험 방법이 아닌 일상적인 방법이다. 이러한 방법들은 시스템 개발 초기나 단기간(short-term)의 효과적인 시험에 응용할 수 없으며, 새로운 기능의 추가에 따른 시험 준비에 많은 비용이 수반되므로 효과적인 시험이 되지 못한다. 이러한 문제를 극복하기 위한 새로운 시험방법으로 시험수행의 핵심적인 역할을 수행하는 선택적인 소프트웨어 시험이 필요하다. 선택적인 시험방법은 3가지 정보를 조합하여 시험항목 순위를 결정하는데 즉, 사용빈도, 시나리오 복잡도, 고장강도 등이다. 이 정보를 사용하여 시험을 수행함으로써 시스템의 치명적인 고장을 찾는데 활용함으로써 보다 효율적인 시스템 시험을 수행할 수 있다. 본 논문에서는 주요기능과 관련된 심각한 오류와 시스템의 치명적인 결함을 찾는 선택적인 소프트웨어 시험 방법에 대해 제안된 방법을 적용, 그 결과를 검증한다.

• ETRI Journal
• /
• 제34권4호
• /
• pp.621-624
• /
• 2012

A new miniaturized 4-port waveguide generating a transverse electromagnetic wave is proposed. The waveguide presents enhanced performance of higher field uniformity in extended test volume up to an increased test frequency limit compared to that of the conventional 2-port waveguide. The advantageous features of the proposed waveguide have been obtained through a new design scheme based on effective miniaturization maintaining good impedance matching. Consequently, we can provide a more accurate electromagnetic compatibility test method, covering larger devices operating in higher frequencies, which is a marked improvement upon the conventional approaches.

• Journal of Welding and Joining
• /
• 제35권2호
• /
• pp.63-70
• /
• 2017

As the Non Destructive Test (NDT) for the welded structure, PT(Penetration Test). MT(Magnetic Test), RT (Radioisotope Test) and UT(Ultrasonic Test) methods are widely used in practice. These NDT methods have been developed toward high efficiency, low cost, real time, and high precise new NDT. For example, RT methods are developed to CT(Computed Tomography)and DR(Digital Radiography), and UT metheds are developed into Phased array, Guide wave, TOFD method. Moreover, the Infrared thermography and Laser ultrasonic technique are newly developed for applying in high temperature objects as the non-contact NDT methods. In this review paper the new high efficiency NDT methods for the welded structure are introduced and the trend of NDT rules applying in welded structure are described.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.693-697
• /
• 2005

This study was performed to develop accelerated life test method of the wind-turbine gearbox using accumulated damage theory that used to model the fatigue of parts that receive variable load. The accumulated damage theory was introduced, and the estimation of life and calculation of accelerated life test time was illustrated. As the actual application example, accelerated life test method of the gearbox was described. Life distribution of the wind-turbine gearbox was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 140,600 hours and 99% reliability for one test sample According to the accumulated damage theory, because test time can shorten in case increase test load, test time could be reduced by 1.2 years when we put the load 1.2 times of rated load than 0.93 times of rated load that is equivalent load calculated by load spectrum of the wind turbine. This time, acceleration coefficient was 21.3. This accelerated test method was used to develop accelerated test method of gear reducer, gear and bearing as well as the industrial gearbox and it is considered to be applied comprehensively to mechanical parts the fatigue of which is happened by load or pressure etc.

• 시스템엔지니어링학술지
• /
• 제10권1호
• /
• pp.73-80
• /
• 2014

Designing test case flows for water crossing operation of a wheeled vehicle is a new attempt for which very limited experiences exist. In this paper, a Function Flow Block Diagram(FFBD) and a Classification Tree Method(CTM) were combined to see if this method is viable to generate the test case flows at the functional analysis stage. It was found that this method can be practically used for the very complicated test case generation.

• Restorative Dentistry and Endodontics
• /
• 제38권1호
• /
• pp.31-35
• /
• 2013

Objectives: This study compared the cyclic fatigue resistance of nickel-titanium (NiTi) files obtained in a conventional test using a simulated canal with a newly developed method that allows the application of constant fatigue load conditions. Materials and Methods: ProFile and K3 files of #25/.06, #30/.06, and #40/.04 were selected. Two types of testing devices were built to test their fatigue performance. The first (conventional) device prescribed curvature inside a simulated canal (C-test), the second new device exerted a constant load (L-test) whilst allowing any resulting curvature. Ten new instruments of each size and brand were tested with each device. The files were rotated until fracture and the number of cycles to failure (NCF) was determined. The NCF were subjected to one-way ANOVA and Duncan's post-hoc test for each method. Spearman's rank correlation coefficient was computed to examine any association between methods. Results: Spearman's rank correlation coefficient (${\rho}$ = -0.905) showed a significant negative correlation between methods. Groups with significant difference after the L-test divided into 4 clusters, whilst the C-test gave just 2 clusters. From the L-test, considering the negative correlation of NCF, K3 gave a significantly lower fatigue resistance than ProFile as in the C-test. K3 #30/.06 showed a lower fatigue resistance than K3 #25/.06, which was not found by the C-test. Variation in fatigue test methodology resulted in different cyclic fatigue resistance rankings for various NiTi files. Conclusions: The new methodology standardized the load during fatigue testing, allowing determination fatigue behavior under constant load conditions.

• ETRI Journal
• /
• 제28권4호
• /
• pp.502-505
• /
• 2006

A new class-based histogram equalization method is proposed for robust speech recognition. The proposed method aims at not only compensating the acoustic mismatch between training and test environments, but also at reducing the discrepancy between the phonetic distributions of training and test speech data. The algorithm utilizes multiple class-specific reference and test cumulative distribution functions, classifies the noisy test features into their corresponding classes, and equalizes the features by using their corresponding class-specific reference and test distributions. Experiments on the Aurora 2 database proved the effectiveness of the proposed method by reducing relative errors by 18.74%, 17.52%, and 23.45% over the conventional histogram equalization method and by 59.43%, 66.00%, and 50.50% over mel-cepstral-based features for test sets A, B, and C, respectively.

• 한국수소및신에너지학회논문집
• /
• 제23권6호
• /
• pp.612-618
• /
• 2012

In this paper, in order to prevent electric shock of high voltage system of HFCV after crash test, insulation performance measurement methods were studied. Under conditions of in-use, insulation performance tests can be divided into measurement method using the vehicle's own RESS as DC voltage source and measurement method using DC voltage from off-vehicle sources. However, these tests can not be applied after a post-crash because parts of high voltage system cover should be removed, and insulation performance can be influenced during these tests. Therefore, we proposed post-crash insulation performance test methods for preventing electric shock through problem analysis of previous post-crash insulation performance tests. Also, test equipment which can measure voltage absence and total energy was developed. We verified performance of the equipment through experiments with vehicle test.