Sustainable plastics can be mainly categorized into (1) biodegradable plastics decomposed into water and carbon dioxide after use, and (2) biomass-derived plastics possessing the carbon neutrality by utilizing raw materials converted from atmospheric carbon dioxide to biomass. Recently, biomass-derived engineering plastics (EP) and natural nanofiber-reinforced nanocomposites are emerging as a new direction of the industry. In addition to the eco-friendliness of natural resources, these materials are competitive over petroleum-based plastics in the high value-added plastics market. Polyesters and polycarbonates synthesized from isosorbide and 2,5-furandicarboxylic acid, which are representative biomass-derived monomers, are at the forefront of industrialization due to their higher transparency, mechanical properties, thermal stability, and gas barrier properties. Moreover, isosorbide has potential to be applied to super EP material with continuous service temperature over 150 ℃. In situ polymerization utilizing surface hydrophilicity and multi-functionality of natural nanofibers such as nanocellulose and nanochitin achieves remarkable improvements of mechanical properties with the minimal dose of nanofillers. Biomass-derived tough-plastics covered in this review are expected to replace petroleum-based plastics by satisfying the carbon neutrality required by the environment, the high functionality by the consumer, and the accessibility by the industry.
Bak, Koang Hum;Ferrara, Lisa;Kim, Kwang Jin;Kim, Jae Min;Kim, Choong Hyun;Benzel, Edward C.
Journal of Korean Neurosurgical Society
/
v.30
no.2
/
pp.131-136
/
2001
Object : The clinical uses of screws are increasing with broader applications in spinal disorders. When screws are inserted repeatedly to achieve optimal position, tips of screw pitch may become damaged during insertion even though there are significant differences in the moduli of elasticity between bone and titanium. The effect of repeated screw insertion on pullout resistance was investigated. Methods : Three different titanium screws(cortical lateral mass screw, cancellous lateral mass screw and cervical vertebral body screw) were inserted into the synthetic cancellous material and then extracted axially at a rate of 2.4mm/min using Instron(Model TT-D, Canton, MA). Each set of screws was inserted and pulled out three times. There were six screws in each group. The insertional torque was measured with a torque wrench during insertion. Pullout strength was recorded with a digital oscilloscope. Results : The mean pullout force measurements for the cortical lateral mass screws($185.66N{\pm}42.60$, $167.10N{\pm}27.01$ and $162.52 N{\pm}23.83$ for first, second and third pullout respectively : p=0.03) and the cervical vertebral body screws($386.0N{\pm}24.1$, $360.2N{\pm}17.5$ and $330.9N{\pm}16.7$ : p=0.0024) showed consecutive decrease in pullout resistance after each pullout, whereas the cancellous lateral mass screws did not($194.00N{\pm}36.47$, $219.24N{\pm}26.58$ and 199.49N(36.63 : p=0.24). The SEM after insertion and pullout three times showed a blunting in the tip of the screw pitch and a smearing of the screw surface. Conclusions : Repetitive screw insertion and pullout resulted in the decrease of pullout resistance in certain screws possibly caused by blunting the screw tip. This means screw tips suffer deformations during either repeated insertion or pullout. Thus, the screws that have been inserted should not be used for the final construct.
Kim Dongkyu;Lee Sang-goo;Chun Jonghoon;Choi Dong-Hoon
Journal of KIISE:Databases
/
v.33
no.1
/
pp.102-116
/
2006
Electronic catalogs (or e-catalogs) hold information about the goods and services offered or requested by the participants, and consequently, form the basis of an e-commerce transaction. Catalog management is complicated by a number of factors and product classification is at the core of these issues. Classification hierarchy is used for spend analysis, custom3 regulation, and product identification. Classification is the foundation on which product databases are designed, and plays a central role in almost all aspects of management and use of product information. However, product classification has received little formal treatment in terms of underlying model, operations, and semantics. We believe that the lack of a logical model for classification Introduces a number of problems not only for the classification itself but also for the product database in general. It needs to meet diverse user views to support efficient and convenient use of product information. It needs to be changed and evolved very often without breaking consistency in the cases of introduction of new products, extinction of existing products, class reorganization, and class specialization. It also needs to be merged and mapped with other classification schemes without information loss when B2B transactions occur. For these requirements, a classification scheme should be so dynamic that it takes in them within right time and cost. The existing classification schemes widely used today such as UNSPSC and eClass, however, have a lot of limitations to meet these requirements for dynamic features of classification. In this paper, we try to understand what it means to classify products and present how best to represent classification schemes so as to capture the semantics behind the classifications and facilitate mappings between them. Product information implies a plenty of semantics such as class attributes like material, time, place, etc., and integrity constraints. In this paper, we analyze the dynamic features of product databases and the limitation of existing code based classification schemes. And describe the semantic classification model, which satisfies the requirements for dynamic features oi product databases. It provides a means to explicitly and formally express more semantics for product classes and organizes class relationships into a graph. We believe the model proposed in this paper satisfies the requirements and challenges that have been raised by previous works.
Journal of the Korean Institute of Traditional Landscape Architecture
/
v.34
no.4
/
pp.14-25
/
2016
This study aims to investigate what flowering plant Jeongjo loved, the attitudes and the reasons, and their implications. The study method was to investigate the contents and meaning in the historical records and to describe their interpretation. Jeongjo's life was consistent with very abstinent life style. His food, clothing and shelter were simple, and he did not show the interests in music, various arts and craft, women, and so on. He did not even show his interest in the flowers and plants of fairyland, beautiful flowers and plants. Jeongjo knew various kinds of flowers, and he was proficient in artistic expressions such as literature or painting with flower material. Due to this kind of attitude, there were few cases to demonstrate his taste on the specific flowering plant. The only one that Jeongjo revealed as his favorite flower was the pomegranate. However, the pomegranate was not the simple flowering plant as the subject of enjoying to Jeongjo. The pomegranate has the meaning of indicator plant to indicate the season of rice farming. Therefore, he made it to be the intermediary to indicate the farming season, which counted a few. Besides, Jeongjo who was threatened by the trials of assassination to him in his early throne period utilized 5,600 pomegranate flowerpots as the barricade of his shelter by arraying them with the type of stone piles in $B{\bar{a}}zh{\grave{e}}nt{\acute{u}}$(八陣圖). The use of Jeongjo's pomegranate flowerpots was not related to the visual utilization like ornament at all, which was very unique case. From multiple records, it was found that the pomegranate was the flower to be with Jeongjo in his period of reign. It is remarkable that the reason why Jeongjo kept pomegranate for a long time like this had the difference from enjoying practice on the ordinary flowering plant. This study has the limitation to be conducted depending on the Korean translated data. Further studies are required according to the translation performance of new historical records.
TheraCal LC, a new light-cured, resin-modified calcium silicate-filled base/liner material, has been introduced as a pulpotomy agent. The aim of this study was to evaluate the capacity of hard tissue formation and pulpal response after pulpotomy with TheraCal LC. Twenty-two 9-week-old male rats were anesthetized, cavities were prepared in maxillary first molars and pulps were capped with formocresol (FC), mineral trioxide aggregate (MTA), and TheraCal LC. Specimens obtained from rats were scanned using a high-resolution micro CT system. The specimens were prepared and evaluated histologically, and immunofluorescence assay was performed to assess the dentin matrix protein-1 (DMP-1) expression. On micro CT analysis, the MTA and TheraCal LC groups showed thicker hard tissue formation than the FC group. On hematoxylin and eosin (H&E) staining, MTA and TheraCal LC groups showed dentine bridge formation with vital pulp beneath the materials. On immunofluorescence analysis, DMP-1 was highly expressed in the TheraCal LC group compared to the FC group. TheraCal LC showed similar capacity to form hard tissue as MTA when it was used as a pulpotomy agent. Because of its good manipulation and faster setting time compared to MTA, TheraCal LC could be considered as a good alternative to MTA.
This paper attempts to explore the place of human and disability rights from the perspective of Social Welfare within the context of the UN Disability Rights Convention of 2006. The overall discussion is focused especially upon the situations of human and disability rights in the Democratic People's Republic of Korea (North Korea) as it is being challenged to drastically address the issues of human rights in general, and disability rights in particular. The UN Disability Rights Convention challenges every ratified State party to commence legal reforms, legal harmonization, and policy and program developments to implement the Convention. Both North and South Korea are not exceptions to this. Even without drawing upon the UN's the Commission of Inquiry on Human Rights in the Democratic People's Republic of Korea, the dire situation of human rights in North Korea is well documented. However, this paper does not assume South Korea's human rights are any way superior to that of North Korea. This paper spells out areas for further action common to two Koreas and to any other nations for that matter. Apart from the general discussion on disability rights, the distinctive contribution of this paper lies in the fact that it has endeavored to draw upon any latest information and data on North Korea. It relied on various sources from UN and also from North Korea itself. One can note that North Korean disability authorities are making strenuous efforts to improve human rights of persons with disabilities in their desires to seek assistance from outside. It also shows an enormous need for international cooperation in seeking financial and material supports. This paper notes the latest political development between North and South Korea in taking "phased" steps for peace and stability as a positive sign for North and South Koreans' DPOs collaboration under the banner of International Cooperation of the article 32 of the UN Disability Rights Convention. More critically, this paper points to the further need to improve the overall data bases to ensure balanced legal reforms, policy developments and sharpen the areas of international collaboration.
Suh, Jong Taek;Yoo, Dong Lim;Kim, Ki Deog;Lee, Jong Nam;Hong, Mi Soon
Korean Journal of Plant Resources
/
v.31
no.4
/
pp.378-383
/
2018
This study was carried out to investigate the optimum cultivation distance for high yielding cultivation of the new variety of Gomchwi in highland and lowland. The test material was used 'Sammany' variety and the area was cultivated with a highland of 750 m above sea level and a lowland of 20 m above sea level. The planting distance was 5 treatments of $20{\times}20cm$, $20{\times}30cm$, $30{\times}30cm$, $35{\times}40cm$ and $40{\times}40cm$, and the plant was cultivated at 35% shading net in the open field. The annual growth of 'Sammany' variety was higher in the highland than in the lowland, but the number of leaves was higher in the lowland than that in the highland. The leaf number per plant was the highest in the $40{\times}40cm$ plot and the more the planting distance was, the more tendency was. However, the leaf weight per plant was higher in the highland than in the lowland. The number of leaves per 10a were higher in the lowland than that of highland and the tendency was more as the planting distance was narrower. Yields were slightly higher in the highland than that of lowland and the highest treatment plot was 2,983 kg/10a in $20{\times}20cm$. In the second year, the growth was high in the highland, and the highland was high in the leaf number and leaf weight and the same tendency in the yields. Among the planting distances, Yields in both areas were the highest in the $20{\times}20cm$ treatment, with 3,369 kg/10a in lowland and 7,257 kg/10a in highland. The growth of the third year was slightly better in the highland than that of the lowland but the difference was not significant. However, the number of leaves and leaf weight per plant were higher in the lowland than that of highland. And, in terms of leaf number and yield per 10a, it was also higher in the lowland than that in the highland. The narrower the planting distance was increased yields, and the highest yield was 6,051 kg/10a in $20{\times}20cm$. The lowland was high in yield until the third year, but the highland was the highest in the second year and decreased slightly in the third year. The narrower the planting distance in the both areas, the higher the yield, and the leaf size tended to be small.
Due to the high sensitivity to radiation, excessive exposure needs to be prevented by accurately measuring the dose irradiated to the skin during radiation therapy. Although clinical trials use dosimeters such as film, OSLD, TLD, glass dosimeter, etc. to measure skin dose, these dosimeters have difficulty in accurate dosimetry on skin curves. In this study, to solve these problems, we developed a skin dosimeter that can be attached according to human flexion and evaluated its response characteristics. For the manufacture of the dosimeter, lead oxide (PbO) with high atomic number (ZPb: 82, ZO: 8) and density (9.53 g/cm3) and silicon binders that can bend according to human flexion were used. In the case of a dosimeter made of PbO material, the performance degradation has been prevented by using parylene and others due to the presence of degradation due to oxidation, but the previously used parylene is affected by bending, so a new form of passive layer was produced and applied to the skin dosimeter. The characteristic evaluation of the skin dosimeter was evaluated by analyzing SEM, reproducibility, and linearity. Through SEM analysis, bending was evaluated, reproducibility and linearity at 6 MeV energy were evaluated, and applicability was assessed with a skin dosimeter. As a result of observing the dosimeter surface through SEM analysis, the parylene passive layer PbO dosimeter with the positive layer raised to the parylene produced cracks on the surface when bent. On the other hand, no crack was observed in the silicon passive layer PbO dosimeter, which was raised to silicon passive layer. In the reproducibility measurement results, the RSD of the silicon passive layer PbO dosimeter was 1.47% which satisfied the evaluation criteria RSD 1.5% and the linearity evaluation results showed the R2 value of 0.9990, which satisfied the evaluation criteria R2 9990. The silicon passive layer PbO dosimeter was evaluated to be applicable to skin dosimeters by demonstrating high signal stability, precision, and accuracy in reproducibility and linearity, without cracking due to bending.
This paper is an introductory study of the wooden Buddha images excavated in the Mekong Delta in present-day southern Vietnam. Approximately thirty examples of wooden Buddha images have been recovered in the Mekong Delta. As they were found among the major historic sites of Funan (the first kingdom in Southeast Asia), including Oc Eo, and likely date to the sixth century, they can be regarded as the works of Funan. Similarly to stone Buddha images, these wooden examples are considered important for their demonstration of aspects of early Buddhist sculpture in Southeast Asia. Most of these Funan wooden Buddha images are presumed to have been produced around the sixth century based on radiocarbon dating and their stylistic characteristics. This paper analyzed the iconography and style of eight examples whose forms are relatively recognizable. The eight images can be divided into four types according to their postures, dress styles, and hand gestures. They all share features of the Sarnath style of the Gupta period in India as seen in their slender bodies and the outer robe that clings to the body. However, some display a South Indian style of Buddha images in their upright posture, style of wearing a monastic robe with the right shoulder exposed, and making the vitarka mudra (preaching gesture) that is often seen in Sri Lankan Buddha images. This suggests that Buddhist sculptors in Funan devised a new style by incorporating the principal styles of Indian Buddhist sculpture. Another notable feature of these Funan images is their material, namely, wood. While none of the contemporaneous Hindu sculptures discovered from the same historic sites are made of wood, numerous Buddhist sculptures are. This paper postulates that the use of wood in Buddhist sculptures was promoted for reasons beyond ease of carving. According to the Buddhist literature, the first-ever Buddha image was the so-called 'Udayana image' made out of sandalwood. This image and its story was well-known in the Southern Dynasty of China around the sixth century. Interestingly, some auspicious sandalwood images of the Buddha was believed to have been brought into the Southern Dynasty from Funan. This suggests the possibility that the legend of the Udayana image might have been known in Funan as well and resulted in the production of wooden sculptures there.
This article was started to find a way for creating a performance out of Gut. In order to find such way, the first thing that had to be done was to organize the Gut performances that had been made until now. It was to organize the existing study on the performances and to seek a different way from it, believing that the virtue of a performance is to 'create diversity'. However, it was not easy to organize the Gut performances, which became full-scale in the 1980s, because they were never organized before. Therefore, based on my direct and indirect experience, I have organized the most important performances in chronological order. Most importantly, as the planners of the performances (can sometimes be a group or an organization instead of an individual) are the ones who make the show possible, I have noted on them with keen interest. The National Folk Art Performance Contests in Korea, Theater 'Space Sarang', The Association of Gut, Theater 'Madangsesil', Seoul Nori Madang, and National Gugak center were the center space and planning body of the Gut performances. Recording the history of Gut is a worthwhile work of its own. However, it is a substantial amount of task to be done with individual effort, and it has to be progressed as a public project in order to promote and spread its value. Therefore, this article raises the need for it. Meanwhile, as stated earlier, this article has recorded the history of Gut performances as a precondition to finding a way to create a performance out of Gut. From the experimental organization of the Gut performances history, I could find out that most of the performances had the people who did Gut as the main body and the method of the Gut performance did not significantly deviate from just reenacting the original Gut at the time of when it was performed. Therefore, I have introduced Shinmyeong, the Nori-Pae (troupe), and TheGwangdae, the Korean Traditional Performance troupe, who create Madangguk from various Gut materials. By refining the wholly complicated performance elements of the Gut, it could escape from the 'reenacting' performance to becoming a material or a metaphor for a whole new performance.
이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.