• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.3
• /
• pp.1-8
• /
• 2013

Plasma display panel (PDP) televisions are facing to have a new chance to receive attention along with a boom in 3-D software and contents because PDP can provide the comfortable and realistic 3-D images. The PDP has three driving circuit boards such as X, Y and addressing boards. Cost effective driving waveform has already been reported to decrease the number of driving circuit board. Half bridge based sustaining driver can remove a sustaining driver in the X board. However, the biasing circuit in the X driving boards cannot be reduced because there are some drawbacks such as unstable gas discharge condition and unreliability of an address driver IC. In this paper, the half bridge based sustaining driver is considered and a simple address driver is proposed to remove one driving board, X driving board. The stable gas discharge condition, reliability of the address driver IC and the low cost can be obtained by the proposed circuit.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.4
• /
• pp.465-471
• /
• 2014

This paper proposes a new switching algorithm for an active clamp snubber to improve the efficiency of a module integrated converter system. This system uses an active clamp method for the snubber circuit for the efficiency and reliability of the system. However, the active clamp snubber circuit has the disadvantage that system efficiency is decreased by switch operating time because of heat loss in resonance between the snubber capacitor and leakage inductance. To address this, this paper proposes a new switching algorithm. The proposed algorithm is a technique to reduce power consumption by reducing the resonance of the snubber switch operation time. Also, the snubber switch is operated at zero voltage switching by turning on the snubber switch before main switch turn-off. Simulation and experimental results are presented to show the validity of the proposed new active clamp control algorithm.

• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.1-6
• /
• 2010

Simulation analysis may be the essential means to either evaluate performance of systems or optimize system parameters for new design. Including many variations for design and implementation, MANET (Mobile Ad-hoc NETwork) is one target area of such an analysis. Since every node, however, included in the network has mobility, one MANET could be overlapped or merged with another one which use a different transport protocol. In order to communicate among nodes in this case, the new merged network should configure paths and addresses in advance. Configuring paths and addresses generates much overheads which ultimately cause delay in communicating data. Performance analysis is required to improve the data transport performance by minimizing overheads. This paper proposes a sound address auto-configuration method which is based on an on-demand manner and then presents modeling and performance analysis of the method. NS-2 simulation results verify that the proposed method can not only alleviate overheads, which are inevitably generated for address auto-configuration processes, and but also decentralize them in time.

• Journal of Korean Society for Quality Management
• /
• v.16 no.2
• /
• pp.48-55
• /
• 1988

There have been several papers to illustrate how an information system is used in an automated warehouse system. These papers, however. do not carefully address the role of warehouse planning/control systems nor do they recognize how to integrate the management planning/control systems, and automated warehouse system. This article addresses such issues and shows how a business computer system can be used to integrate and unify the warehouse planning/control systems and the automated warehouse system into it single and highly productive operating system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.478-484
• /
• 2008

When a mobile node moves, MIPv6 operates an authentication process for the new connection. These kinds of frequent binding update and authentication processes cause much traffic and delay the service. To solve this problem, PMIPv6 provides a network-based mobility protocol in order to lessen the load on a mobile node. However, when it is moved from a domain to a domain or in a domain, there still lies a need fDr a new address, so MIPv6's demerit still exists. In IPsec, too, a new negotiation should be made when it is moved to WAN(Wide Area Network). This causes load to the mobile node. In this paper suggests MBB(Make Before Break) system to eliminate disconnections or delays resulted from the address change or renegotiation for security. When the mobile node receives a CoA address, IPsec negotiation gets operated. Its identity is authenticated by sending the identifier used for the prior negotiation to CN(Correspondent Node) through the BID message suggested. After that, negotiation Bets simplified that disconnections can be eliminated, and in the IPsec negotiation, the load on the mobile node can be lessened as well; moreover, two addresses are used for the communication simultaneously, so the probability of packet loss can be reduced.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.127-135
• /
• 2012

This study improves the existing user identification method using user ID and password. The new protocol protecting unauthorized access is designed and developed using user's ID, password, and OTP for user certification as well as MAC address for computer identification on networks. The safety on trials of unauthorized certification is tested and analyzed for four types following the criterion of information acquisition.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.39 no.2
• /
• pp.97-109
• /
• 2014

This paper considers a reverse supply chain with simultaneous recovery of used products and manufacturing of brand-new ones. Recovered products are downgraded and have to be sold in a market different from that of brand-new products at a different price. In case of a shortage of recovered product inventory, a brand-new item, if available, can be offered at the price of a recovered product. In other words, one-way demand substitution is allowed. We address the joint decision of when to manufacture brand-new product, when to recover returned product, and how to control demand substitution to maximize the hybrid production system's profits. To this end, we propose a Markov decision Process model and investigate the structure of the optimal policy. Performance comparison is numerically implemented between the models with and without downward demand substitution option under different operating conditions of the system parameters.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1193-1196
• /
• 2005

In this paper, we presents a new multimedia service transmit method using IPv6. The IPv6 provides the address system of 128 bit and the address space which is infinite it provides. But it will not become the IPv4 and interchange not to be, it uses the DSTM Transition mechanism which will reach and the IPv4 center in the packet header the service type it will be able to support the service class of multi type (TOS) it secures the weak point of data transfer delay it puts a base in the IPv6. The efficiency of this proposed technique have been proven by MPEG-4 streaming video streaming of the IPv6 namely, 6Xtream embodied a order form/live streaming server and the client which it uses to be possible in base and real-time decoding method.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.227-230
• /
• 2003

Mobile SCTP (mSCTP) is a new scheme which can be used to provide seamless handover for the mobile node. The reason that is possible is because of the SCTP extension which provides a method to reconfigure IP address on an existing SCTP association (ADDIP). While mSCTP focuses on an association originated ken mobile node (MN) toward fixed correspondent node (CN), mSCTP with Mobile IP support an association originated from CN toward MN by using the Home Agent in Mobile IP and location management. However, there are still some problems related to communication interruption. In this paper, we present a new scheme to solve these problems. The main idea of this scheme is using the home address of MN as a backup path of an SCTP association.

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.1-12
• /
• 2023

A public address (PA) system installed in a building is a system that delivers alerts, announcements, instructions, etc. in an emergency or disaster situation. As for the products used in PA systems, with the development of information and communication technology, PA products with various functions have been introduced to the market. PA systems recently launched in the market may be connected through a single network to enable efficient management and operation, or use voice recognition technology to deliver quick information in case of an emergency. In addition, a system capable of locating a user inside a building using a location-based service and guiding or responding to a safe area in the event of an emergency is being launched on the market. However, the new PA systems currently on the market add some functions to the existing PA system configuration to make system operation more convenient, but they do not change the complex PA system configuration to reduce facility costs, maintenance, and management costs. In this paper, we propose a novel PA system configuration for buildings using audio networks and control hierarchy over peer-to-peer (Anchor) technology based on audio over IP (AoIP), which simplifies the complex PA system configuration and enables convenient operation and management. As a result of the study, through the emergency signal processing algorithm, fire broadcasting was made possible according to the detection of the existence of a fire signal in the Anchor system. In addition, the control device of the PA system was replaced with software to reduce the equipment installation cost, and the PA system configuration was simplified. In the future, it is expected that the PA system using Anchor technology will become the standard for PA facilities.