• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.4
• /
• pp.281-287
• /
• 2002

This paper investigates on the feasibility of fuzzy logic control for networked control systems. In order to evaluate its feasibility, a networked control system for motor speed control is implemented on a Profibus-DP network. The NCS consists of several inde-pendent, but interacting processes running on two separate stations. By using this NCS, the network-induced delay is analyzed to find the cause and effect of the delay. Furthermore, in order to prove the feasibility, the fuzzy logic controller's performance is compared with those of conventional PID controllers. Based on the experimental results, the fuzzy logic controller can be a viable choice far NCS due to its robustness against parameter uncertainty.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.354-356
• /
• 2006

In this paper, the position control performance of networked control systems is analyzed when time delay through the network is considered. Integrating a control system into a network has great advantages over the traditional control system which uses point to point connection: it allows remarkable reduction in wiring, makes it easy to install and maintain the system, and improves compability. However, a networked control system has the critical defect that network uncertainties, such as time delay, can degrade the control system's performance. Therefore, the major concern of a networked control system is analyzing the effect of network uncertainties. This paper is concerned with PID controller performance for stability region, critical stability region and unstability region under the time delay in the Controller Area Network.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.80-88
• /
• 2002

As many sensors and actuators are used in automated systems, various industrial networks are adopted for digital control system. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation scheme of a networked control system via Profibus-DP network. More specifically, the effect of the network delay on the control performance was evaluated on a Profibus-DP testbed, and a GA-based PID tuning algorithm is proposed to design controllers suitable for networked control systems.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.2
• /
• pp.172-177
• /
• 2006

In the networked control system (NCS), the uncertain network-induced delay and nonlinear controlled object are the main problems, because they can degrade the performance of the control system and even destabilize it. In this paper, a class of uncertain and nonlinear networked control systems is discussed and its sufficient condition for the robust asymptotic stability is presented. Further, the maximum network-induced delay that insures the system stability is obtained. The Lyapunov and LMI theorems are employed to investigate the problem. The result of an illustrative example shows that the robust stability analysis is sufficient.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.1
• /
• pp.9-15
• /
• 2018

This paper describes the applicability of Bluetooth and ZigBee networks for real-time control in wireless networked control system and suggests an effective usage of them. The Bluetooth SCO link, SPP and HID profiles and the ZigBee non-beacon enabled network are analyzed and the latency of them are measured. A number of wireless networked control system experiments are performed via DC motor control system and the various profiles of Bluetooth and ZigBee in real-time wireless networked control system are compared.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1131-1135
• /
• 2014

This paper proposes the enhanced faulty node detection scheme with hybrid algorithm using Markov-chain model on BCH (Bose-Chaudhuri-Hocquenghem) code in naval distributed control networked systems. The probabilistic model-driven approach, on Markov-chain model, in this paper uses the faulty weighting interval factors, which are based on the BCH code. In this scheme, the master node examines each slave-nodes continuously using three defined states : Good, Warning, Bad-state. These states change using the probabilistic calculation method. This method can improve the performance of detecting the faulty state node more efficiently. Simulation results show that the proposed method can improve the accuracy in faulty node detection scheme for real-time naval distributed control networked systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.598-601
• /
• 2001

As many sensors and actuators are used in many automated system, various industrial networks are adopted for digital control system. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation scheme of a networked control system via Profibus-DP network. More specifically, the effect of the network delay on the control performance was evaluated on a Profibus-DP testbed, and a GA based PID tuning algorithm is proposed to demonstrate the fesibility of the networked control system.

• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.72-77
• /
• 2002

Delay and noise in networked control systems are inevitable and can degrade system performance or stability This paper propose a compensation method for networked control systems with network-induced delay and noise using LMI(linear matrix inequality)-based H_\infty optimization. The H_\infty optimization methods have adapted to account for both the time delay and noise effects. Some simulations applied to inverted pendulum with networked control show that the proposed method works well.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.38-40
• /
• 2004

An $H_2$ servo controller is proposed for networked control systems. The network-induced delay is assumed to be time-varying and vary in the known range. The proposed controller guarantees stability and $H_2$ performance for all time-varying delay in the known range. The proposed controller is verified using a simple networked motor control system.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.11a
• /
• pp.289-292
• /
• 2006

In this paper, a wireless control network based on IEEE 802.15.4 MAC protocol is proposed. The superframe of IEEE 802.15.4 is applied to the proposed wireless control network. The transmission and bandwidth management method are proposed for efficient transmission in the superframe. By these methods, the proposed wireless control network protocol is able to transmit three types of data (periodic data, sporadic data, and non real-time message), and guarantee real-time transmission within deadline.