• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.478-483
• /
• 2003

In this paper, in order to fabricate the circularly polarized diversity system which will mitigate multipath fading, 5.8GHz band microstrip array antenna were designed and fabricated. These antenna were designed using Ensemble 6.0 program and the fabricated antenna were vertical and horizontal polarized antenna, left-handed circularly polarized antenna, and right-handed circularly polarized antenna. The designed antenna parameters included S11 and impedance characteristics of fabricated antenna were measured using Network Analyzer(8753ES). From the measurement results, the S11 for each polarization antenna at resonance frequency of 5.8GHz band was showed -38dB, -44dB, and -50dB respectively and it was similar to the simulation result, and also the impedance can be matched at $50{\Omega}$. In order to compare polarization characteristics, broadband measurement was also conducted in this paper.

• 한국전자파학회논문지
• /
• 제29권10호
• /
• pp.799-804
• /
• 2018

본 논문에서는 일반 측정환경에서 자유공간 물질상수 측정법을 사용한 판형 유전체의 유전율 측정 방법을 제안한다. 측정에는 회로망분석기와 동일한 두 개의 혼 안테나가 S-parameter 측정을 위해 사용되었으며, 측정 결과로부터 판형 유전체의 투과 및 반사계수를 계산하였다. 정밀한 측정을 할 수 없는 환경에서 신뢰할 수 있는 유전율을 얻기 위하여 상대적으로 측정 환경에 의한 측정불확도가 작은 투과계수의 크기만을 유전율 추정에 이용하였으며, 최종적으로 다양한 주파수에서 측정된 결과를 비교하여 유전율을 특정하였다.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.445-450
• /
• 2012

We have developed an implantable wireless sensor for real time pressure monitoring of blood circulation system. MEMS (micro-electro-mechanical system) technology was adopted as a sensor development method. The sensor is composed of photolithographically patterned inductors and a distributed capacitor in gap between the inductors. A resulting LC resonant system produces its resonant frequency in range of 269 to 284 MHz at 740 mmHg. To read the resonant frequency changed by blood pressure variation, we developed a custom readout system based on a network analyzer functionality. The bench-top testing of the pressure sensors showed good mechanical and electrical functionality. A sensor was implanted into tibial artery of farm pig, and interrogated wirelessly with accurate readings of blood pressure. After 45 days, the sensor's electrical response and histopathology were studied with good frequency reading and biocompatibility.

• 한국통신학회논문지
• /
• 제35권12A호
• /
• pp.1214-1218
• /
• 2010

본 연구에서는 병렬 결합된 전송 선로에 SIR 구조를 결합하여 가파른 차단 특성과 낮은 상업 손실을 갖는 소형 UWB 대역 통과 여파기를 설계하였다. 대역통과 여파가는 시뮬레이터를 이용하여 최적 설계하였으며, 제작된 대역통과 여파기의 통과대역은 3.1GHz-10.6GHz이고 삽입손실은 8.3GHz에서 0.39dB이며, 반사손실은 9.37GHz에서 12.394dB의 특성을 보였다. 따라서 본 연구에서 제안된 대역통과 여파기는 경량화이면서도 높은 차수가 가지는 가파른 차단 특성이 요구되는 초고속 통신 시스템에 적용될 수 있다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.633-636
• /
• 2007

The objective of this study is to measure backscattering coefficients of paddy rice using L, C, X-bands scatterometer system during a rice growth period. The measurement was conducted at an experimental field located in National Institute of Agricultural Science and Technology (NIAST), Suwon, Korea. The rice cultivar was a kind of Japonica type, called Chuchung. The scatterometer system consists of dual-polarimetric square horn antennas, HP8720D vector network analyzer (20MHz ${\sim}$ 20GHz), RF cables, and a personal computer that controls frequency, polarization and data storage. The scatterometer system is calibrated using a calibration kit (3.5mm, 85052D). The backscattering coefficients were calculated by applying radar equation for the measured at incidence angles between $20^{\circ}$ and $60^{\circ}$ for four polarization (HR, VV, HV, VH), respectively, and compared with rice growth data such as plant height, stem number, biomass, dry weight and LAI that were collected at time of each scatterometer measurement simultaneously.

• Progress in Superconductivity
• /
• 제4권1호
• /
• pp.74-79
• /
• 2002

High-speed probe made to test single flux quantum(SFQ) circuits was comprised of semi-rigid coaxial cables and microstrip lines. The impedance was set at 50 $\Omega$to carry high-speed signals without much loss. To do performance test of high-speed probe, we have attempted to fabricate a test chip which has a coplanar waveguide(CPW) structure. Electromagnetic simulation was done to optimize the dimension of CPW so that the CPW structure has an impedance of 50$\Omega$, matching in impedance with the probe. We also used the simulation to investigate the effect of the width of signal line and the gap between signal line and ground plane to the characteristics of CPW structure. We fabricated the CPW structure with a gold film deposited on Si wafer whose resistivity was above $1.5\times$10$_4$$\Omega$.cm. The magnitudes of S／sub 21／ of CPW at 6 ㎓ in simulations and in the actual measurements done with a network analyzer were: -0.1 ㏈ and -0.33 ㏈ (type A),-0.2 ㏈ and -0.48 ㏈ (type B), respectively. Using the test chip, we have successfully tested the performance of high-speed probe made for SFQ circuits. The probe showed the good performance overthe bandwidth of 10 ㎓.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.184-184
• /
• 2012

We proposed a new measurement method of cutoff probe using the reactance spectrum of the plasma in cutoff probe system instead of transmission spectrum. The high accurate reactance spectrum of the plasma which is expected in previous circuit simulation of cutoff probe [1] was measured by using the automatic port extension method of the network analyzer. The measured reactance spectrum is good agreement with E/M wave simulation result (CST Microwave Studio). From the analysis of the measured reactance spectrum based on the circuit modeling, not only the electron density but also electron-neutral collision frequency can be simply obtained. The obtained results of electron density and e-n collision frequency were presented and discussed in wide range of experimental conditions, together with comparison result with previous methods (a previous cutoff probe using transmission spectrum and a single langmuir probe).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권4호
• /
• pp.1063-1075
• /
• 2012

To locate an object accurately in the wireless sensor networks, the distance measure based on time-delay plays an important role. In this paper, we propose a maximum likelihood (ML) time-delay estimation algorithm in multi-path wireless propagation channel. We get the joint probability density function after sampling the frequency domain response of the multi-path channel, which could be obtained by the vector network analyzer. Based on the ML criterion, the time-delay values of different paths are estimated. Considering the ML function is non-linear with respect to the multi-path time-delays, we first obtain the coarse values of different paths using the subspace fitting algorithm, then take them as an initial point, and finally get the ML time-delay estimation values with the pattern searching optimization method. The simulation results show that although the ML estimation variance could not reach the Cramer-Rao lower bounds (CRLB), its performance is superior to that of subspace fitting algorithm, and could be seen as a fine algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.473-475
• /
• 2000

The (1-x)$MgTiO_3-xSrTiO_3$$(x=0.03{\sim}0.04)$ ceramics were fabricated by conventional mixed oxide method. The structural properties and microwave dielectric properties were investigated by XRD, SEM and HP8757D network analyzer. In the $0.96MgTiO_3-0.04SrTiO_3$ ceramics, the perovskite structure $SrTiO_3$ and ilmenite structure $MgTiO_3$ phases were coexisted. The dielectric constant(${\varepsilon}_r$ and temperature coefficient of resonant frequency(${\tau}_f$) was increased with addition of $SrTiO_3$. In the case of $0.96MgTiO_3-0.04SrTiO_3$ ceramics sintered at $1325^{\circ}C$, the dielectric constant, quality factor and temperature coefficient of resonant frequency were 20.13, 7956(at 7.27GHz), +1.7568ppm/$^{\circ}C$, respectively.

• 한국항공우주학회지
• /
• 제33권4호
• /
• pp.41-46
• /
• 2005

본 연구에서는 고 전력의 RF 신호용 직접 접촉식 스위치에서 문제가 되고 있는 접촉부위에서의 미소용접에 의한 점착 현상을 감소시키기 위해, 고 융점 금속인 텅스텐(W)과 몰리브덴(Mo)을 스위치 접촉 부위에 코팅하여 스위치의 성능을 분석하였다. 스위치의 삽입손실과 신호격리도, 전력 손실 등의 변화를 네트워크 분석기, 전력 측정기 등을 통하여 측정하였다. 측정결과로부터 RF 신호 전송에 있어서 낮은 입력 전력에서는 고융점 금속이 금(Au)보다 접촉저항이 더 크지만 입력 전력이 커지면 비교적 낮은 비저항의 고융점 금속을 사용하는 것이 고전력 전송 및 수명 연장에 있어서 유리함을 밝혀냈다.