• Agricultural and Biosystems Engineering
• /
• v.6 no.2
• /
• pp.70-76
• /
• 2005

Seed, stem and sprout of F. tataricum were separately milled using the ultra fine mill under the same condition to investigate the effect of roasting or extruding on the particle size, microstructure and water solubility of dietary fiber. The mean particle size of MR (roasting) is increased in stem and sprout, and that of ME (extruding) is increased in seed, compared to that of control. The microscopic views of seed show that control has the spherical shape but ME the larger and irregular shape, and those of stem and sprout show that control has the needle like shape but ME more rounded shape. Water solubility index of ME is much higher than that of control or MR in seed, stem and sprout. It shows that seed, stem and sprout are damaged more in extruding than in roasting, and the starch and cell wall structure must be destroyed to change the water insoluble dietary fiber into the water soluble dietary fiber.

• The Plant Pathology Journal
• /
• v.18 no.3
• /
• pp.161-164
• /
• 2002

Colletotrichum musae was isolated from dark-brown anthracnose lesions on commercial banana (Musa sapientum L.) to establish the causal agent of the symptom. The fungus grew fast and produced white aerial mycelium on PDA. Acervuli developed abundantly on culture plates after incubation for 10 days at $25^{\circ}C$. Pinkish conidial masses were produced on the acervuli, which mostly coalesced together, Conidia were aseptate, hyaline, straight, ellipsoid to globose, and 14.5$\times$6.9 $\mu\textrm{m}$ in size. Black, clavate, round, or irregular-shaped appressoria measuring 8.8$\times$6.8 $\mu\textrm{m}$ were readily formed from germ tubes. Setae-like structures were not found either on the lesion or on the cultures. Sclerotia were also absent. Among the media, PDA medium was the best for mycelial growth. The optimum temperature for mycelial growth was $28^{\circ}C$, while the optimum pH ranged from pH 5.5 to 6.5. The isolates of C musae caused black necrotic lesions on banana fruits by needle-wound inoculation, and orange-colored spore masses were produced on the lesions. The fungus also caused discoloration on apple fruits inoculated.

• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.2
• /
• pp.85-94
• /
• 1992

Microstructural evolution of wrought Inconel 718 superalloy with different heat treatment conditions was studied. Heat treatment was performed via conventional(CHT), modified(MHT), Merrick(MeHT) and modified Merrick (MMeHT) methods. The size of ${\gamma}^{\prime}$ and ${\gamma}^{\prime\prime}$ precipitates which are principal strengthening phases in Inconel 718 superalloy increase in order of CHT, MHT, MeHT. For the case of MMeHT, a coexistence of fine ${\gamma}^{\prime\prime}$ precipitate and very coarse particles due to exess growth of ${\gamma}^{\prime\prime}$, which is called bimodal distribution, was observed. CHT gave the finest grain size. (Ti, Nb)C carbide and needle-like ${\delta}$ phase were formed together at grain boundaries for CHT, and were formed both inside and at boundaries of grains for MHT, MeHT and MMeHT. Morphology of partially serrated grain boundaries was developed in all heat treatment conditions except CHT.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.510-518
• /
• 2005

In this study, we investigated whether PLGA microspheres in combination with hyaluronic acid (HA) gel have appropriate properties as a bulking agent for urologic injection therapies and whether the implantation of PLGA microspheres and HA gel induces angiogenesis in the newly formed tissues. In order to investigate whether this bulking agent is injectable, this material was injected through 24-gauge needles into the subcutaneous dorsum of the mouse. The bulking agent was easily injected without needle obstruction. Histological analyses of the hybrid tissues at 2 weeks showed that host cells at the surrounding tissues migrated into the spaces between the implanted PLGA microspheres and formed tissue-like structures. An inflammatory response to the implants was mild at 2 weeks and diminished at 8 weeks. Importantly, extensive ingrowth of blood vessels was observed in the hybrid tissues formed by the injection of PLGA microspheres and HA, whereas blood vessels rarely formed in the hybrid tissues formed by the injection of PLGA microspheres only. The implant volume was conserved for almost the entire implantation period. Histological analyses of the distant organs of the bulking agent-implanted animals, such as the lungs, liver, heart, brain, kidney, and spleen, showed no evidence of the injected microsphere migration. These results show that PLGA microspheres in combination with HA possess the appropriate characteristics for a bulking agent for urologic injection therapies and induce extensive blood vessel formation in the hybrid tissues.

• Journal of the Korean Ceramic Society
• /
• v.43 no.9 s.292
• /
• pp.582-587
• /
• 2006

Decomposition behavior of $ferro-Si_3N_4$was investigated with varying temperature and holding time in mud components for high temperature refractory applications. Porosities gradually increased with increasing temperature and holding time due to the carbothermal reduction of $Si_3N_4\;and\;SiO_2$. Silicon monoxide (SiO) as a intermediate resulted from evaporation of $Si_3N_4\;and\;SiO_2$ reacted with C sources to generate needle-like ${\beta}-SiC$ and Fe in $Si_3N_4$ acted as a catalyst in order to enhance growth of SiC grain with the preferred orientation. SiC generation yield increased with increasing holding time, all of the $Si_3N_4\;and\;SiO_2$ affected on SiC formation up to 2h. However, SiC generation was only dependent on residual $SiO_2$ over 2h, because the carbothermal reduction reaction of $Si_3N_4$ was no longer possible at that time.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.471-472
• /
• 2007

The scalp is skin tissue for skull-protection and roots for hair growth. Therefore continuous monitoring of scalp condition is essential for hair management. However, the equipments for existent are inconvenient to use because of focus tremor and external factors(Hair Gel, Wax, accessories and so on). Furthermore there is a problem to use an expensive optical devices like CCD (Charge Coupled Device) camera or lens of 200 - 1000 magnification. It causes a difficulty of using those equipment. We design the special electrode(length 5.65mm, diameter 0.8mm of needle shape) and the impedance system(1kHz, 78uA). Tn this paper, we can measure scalp impedance with our system. Moreover, we find the possibility of classifying scalp condition with measured impedance values. For the classification of scalp condition, we used ARAMO-TS as an imaging system. In conclusion, the problem of existent devices could be improved using these method. It also has a benefit of continuous monitoring of scalp condition.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.3950-3956
• /
• 2012

In order to improve the bioactivity and mechanical properties of hydroxyapatite (HAp), chitosan (Chi) was in situ combined into HAp to fabricate a composite scaffold by a sublimation-assisted compression method. A highly porous film with sufficient mechanical strength was prepared and the bioactivity was investigated by examining the apatite formed on the scaffolds incubated in simulated body fluid. In addition, the cytotoxicity of the HAp/Chi composite was studied by evaluating the viability of murine fibroblasts (L-929 cells) exposed to diluted extracts of the composite films. The apatite layer was assessed using scanning electronic microscopy, inductively coupled plasma-optical emission spectrometry and weight measurement. Composite analysis showed that a layer of micro-sized, needle-like crystals was formed on the surface of the composite film. Additionally, the WST-8 assay after L-929 cells were exposed to diluted extracts of the composite indicated that the HAp/Chi scaffold has good in vitro cytocompatibility. The results indicated that HAp/Chi composites with porous structure are promising scaffolding materials for bone-patch engineering because their porous morphology can provide an environment conductive to attachment and growth of osteoblasts and osteogenic cells.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.6
• /
• pp.947-950
• /
• 1995

We have experienced a case of pulmonary adenocarcinoma looked like cavitary lesion of pulmonary tuberculosis in 49-year-old male patient. He has taken antituberculous medication for 5 months under the impression of pulmonary tuberculosis with cavity at local hospital. The cavitary lesion was changed nodular mass on follow-up chest X-ray. Transthoracic fine needle aspiration was done and cytologic specimen suggested squamous cell carcinoma. Right middle lobectomy was performed. The nodular mass, which was confirmed as adenocarcinoma on microscopic examination, had central cavity filled with hemorrhage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.600-603
• /
• 2000

Recently, Display devices have become important in the information-oriented society and flat display devices are greatly demanded. Liquid crystal display(LCD) represents one of the most promising devices for large size desk-top monitors, notebook PC and car navigation system. However LCD cannot give forth light itself and must have backlight system. The most popular backlighting system is composed of a lighting-guide plate and CCFL as a lighting source. The number of CCFL must increase up if the area of display is increased. So a new backlighting source with high luminance is needed for large LCDs. In this paper, we proposed a surface discharge FFL with the new electrode structure like the needle shaped electrode as the variation of cell structure to high luminance and low power consumption. In comparison with different electrode structure it has low discharge voltage and current and good optical characteristics. So it has better discharge characteristics than different surface discharge FFL and can be fungible for a backlight as a lighting source in LCDs.

• Journal of the Korean Ceramic Society
• /
• v.11 no.3
• /
• pp.27-32
• /
• 1974

The effect of impurities of andalusite on the morphology of the crystallization of mullite was investigated. The raw, concentrated and purified andalusite were fired at 145$0^{\circ}C$. and 150$0^{\circ}C$. Each of three grades of andalusite was examined in a scanning electron microscope, X-ray diffractometer and etc. The raw andalusite showed deeply etched textures and prismatic crystals which are estimated to be an average of 2.5u in width and 15u in length. Concentrated andalusite showed poorly formed and elongated prismatic crystals. Purified andalusite showed condensed needle-like crystals which are estimated to be an average of 0.4$\mu$ in width and 2.0$\mu$ in length, but at the boundary of the original andalusite grain, prismatic crystals were seen. It is supposed that the purified andalusite is able to utilize as a raw material for high alumina refractories with refractoriness S.K. 38.