• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.145-148
• /
• 2000

In contrast to the $\pi$ -conjugated polymers which typically absorb light only in the visible spectral region, the $\sigma$-conjugated polymers can be used as efficient material absorbing light in the UV region. In this work, the electronic and optical properties of I$_2$-doped $\sigma$ -conjugated poly (methyl-phenylsilylene) (PMPSi) polymer were investigated. DC conductivity up to 1.2$\times$10$^{-4}$ S/cm was obtained by I$_2$-doping. In UV/Vis absorbance spectrum, a new peak was observed near 370 nm, which was explained by polaron model. The photoluminescence (PL) intensity decreased with increasing degree of I$_2$-doping, and the Infrared (IR) spectrum analysis revealed that the dopants are not directly coupled to the polymer, but effect motions of the methyl and phenyl groups.

• Bulletin of the Korean Space Science Society
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.11-11
• /
• 1993

The Korean sounding rockets(KSR) 1, 2 equigped with the UV optical detectors have been launched at An-heung, Chungchongnam-do, of June 4 and September 1, 1993,respectively. The UV detector is used to measure the attenuation of solar UV radiation for various frequency bards in the stratospgere. We obtained the profile of the ozone number density within the altitulde of 15 - 30 km by applying the Beer-Lambert law. It is found that the maHimum of the ozone distribution occurs near 2sht which is quite consistent with the mean value in the mid-latituderegions. We will also compare our results froiu KSR 1,2 with the other observational data from the Dobson speceo meter at Yonsei Univ. and the LIDAa which were performed simultaneously with the sounding rocket experiments.

• Journal of Korean Society for Atmospheric Environment
• /
• 제24권E2호
• /
• pp.74-82
• /
• 2008

We have examined seasonal and annual means of clear-sky solar noon and daily erythemal ultraviolet-B irradiances measured in Anmyeon. The intensity of the EUV-B irradiance is mainly dependent on solar zenith angle (SZA) and total ozone amounts on clear day conditions. The daily maximum occurs near solar noon time and the highest monthly accumulated EUV-B is seen in July in Anmyeon. The maximum daily variation occurs in June and July due to precipitation and clouds. The 7-year trend of EUV-B irradiance shows that it is slightly increasing. Additionally, we could confirm that aerosol effects such as Asian Dust decreases the EUV-B irradiance reaching the ground surface by 35% to 60%. For more than 45% of the summer days, EUV-B irradiacne was high enough that the UV index registered higher than category Extremely High. This information will be very important for evaluation of the UV index for prevention of both skin cancer and ecosystem damages as well as to understand UV climatology over the Korean Peninsula.

• Advances in environmental research
• /
• 제3권1호
• /
• pp.11-28
• /
• 2014

Advanced oxidation processes using UV and catalysts like $TiO_2$ and ZnO have been recently applied for the photocatalytic degradation of MTBE in water. Attempts have been made to replace the UV radiation by the solar spectrum. This review intends to shed more light on the work that has been done so far in this area of research. The information provided will help in crystallizing the ideas required to shift the trend from UV photocatalysis to sunlight photocatalysis. The careful optimization of the reaction parameters and the type of the dopant employed are greatly responsible for any enhancement in the degradation process. The advantage of shifting from UV photocatalysts to visible light photocatalysts can be observed when catalysts like $TiO_2$ and ZnO are doped with suitable metals. Therefore, it is expected that in the near future, the visible light photocatalysis will be the main technique applied for the remediation of water contaminated with MTBE.

• Horticultural Science & Technology
• /
• 제35권1호
• /
• pp.79-87
• /
• 2017

We examined the effect of two greenhouse covering materials (glass or solid polycarbonate sheets) on the light environment and growth of tomato and cucumber plants. Spectral analysis showed that polycarbonate sheets entirely blocked radiation in both the UV - B (300 - 320 nm) and UV - A (320 - 400 nm) ranges, whereas glass transmitted UV - A and was only opaque to UV - B. The transmittance of photosynthetically active radiation (400 - 700 nm) and near infrared radiation (700 - 1100 nm) was higher in polycarbonate than glass. Air and soil temperatures were not significantly different between greenhouses covered with either material. The growth of cucumber plants was slightly affected by covering materials, whereas no significant changes in growth parameters were observed for tomato plants. The color parameters of tomato fruits were affected by the cover material, whereas cucumber fruits showed similar coloration in both glass and polycarbonate greenhouses.

• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.138-144
• /
• 2016

The discharge characteristics of pulse-driven coplanar micro barrier discharges for an ultraviolet (UV) light source using Ne-Xe mixture have been investigated using a two-dimensional fluid simulation at near-atmospheric pressure. The densities of electrons, the radiative excited states, the metastable excited states, and the power loss are investigated with the variations of gas pressure and the gap distance. With a fixed gap distance, the number of the radiative states $Xe^*(^3P_1)$ increases with the increasing driving voltage, but this number shows weak dependency on the gas when that pressure is over 400 Torr. However, the number of the radiative states increases with the increase of the gap distance at a fixed voltage, while the power loss decreases. Therefore, a long gap discharge has higher efficiency for UV generation than does a short gap discharge. A slight change in the electrode tilt angle enhances the number of radiative species 2 or 3 times with the same operation conditions. Therefore, the intensity and efficiency of the UV light source can be controlled independently by changing the gap distance and the electrode structure.

• Journal of the Korean Chemical Society
• /
• 제38권7호
• /
• pp.480-484
• /
• 1994

The durability of UV radiation cured coatings near the film-substrate interface has been studied. Particularly, the influence of the reactive diluent and oligomer in the UV-cured urethane acrylate formulation on the wrinkle formation of coating films was investigated. Results showed that wrinkle resistance increases when DMTA loss peaks of coating network are broad and has shoulder. When modified aromatic urethane acrylate oligomer is used to replace the aliphatic one, resulting cured network provides coating film of high hardness and flexibility. Therefore, the high values of loss modulus as low temperature are considered to be the main reason for wrinkle resistance improvements. The SEM and instron data support above conclusion.

• Food Science and Biotechnology
• /
• 제17권6호
• /
• pp.1345-1348
• /
• 2008

Titanium dioxide ($TiO_2$) shows antibacterial effects when exposed to near ultra violet (UV) light. In this study, $TiO_2$ photocatalytic continuous reactor was designed and applied to food-borne pathogens such as Vibrio parahaemolyticus ATCC 17802, Salmonella choleraesuis ATCC 14028, and Listeria monocytogenes ATCC 15313. $TiO_2$ films were prepared by conventional sol-gel dip-coating method using titanium tetra iso-propoxide (TTIP). The antibacterial activity of photocatalytic reactor with various flow rates and UV-A illumination time showed effective bactericidal activity. As the UV-A illumination time increased, survival rates of those bacteria decreased. After 60 min of UV-A illumination, the survival rates of V. parahaemolyticus and S. choleraesuis were less than 0.1%. However, that of L. monocytogenes was about 5% at that time point. These results present an effective way to exclude pathogenic bacteria from aqueous foods.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• 제19권1호
• /
• pp.15-18
• /
• 2009

To enhance near UV-visible absorption region and to applied phosphor convert-white LEOs (PC-WLEDs), a red phosphor composed of ${Y_2}{SiO_5}:\;EU^{3+}$, $Bi^{3+}$ compounds was prepared by the conventional solid-state reaction. The photoluminescence (PL) shown that samples were excited by near UV light 395 nm for measurement of PL spectra. Emission spectra of samples have shown red emissions at 612 nm ($^5D_0{\to}^7F_2$). The enhanced near $UV{\sim}$ visible excitation spectrum with a broad band centered at 258 nm and 282 nm originated in the transitions toward the charge transfer state (CTS) due to the $Eu^{3+}-Bi^{3+}-O^{2-}$ interaction. The other excitation band at $350\;nm{\sim}480\;nm$, corresponding to the transitions $^7F_0{\to}^5L_9$ (364 nm), $^7F_0{\to}^5G_3$ (381 nm), $^7F_0{\to}^5L_6$ (395 nm), $^7F_0{\to}^5D_3$, (415 nm) and $^7F_0{\to}^5D_2$ (466 nm), occurred due to enhanced the f-f transition increasing $Bi^{3+}$ and $Eu^{3+}$ ions. The PL intensity increased with increased as concentration of $Bi^{3+}$ and the emission intensity becomes with a maximum at 0.125 mol.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권3호
• /
• pp.199-205
• /
• 2006

Patterned sapphire substrates (PSS) were fabricated by a simple wet etching process with $SiO_2$ stripe masks and a mixed solution of $H_2SO_4$ and $H_3PO_4$. GaN layers were epitaxially grown on the PSS under the optimized 2-step growth condition of metalorganic vapor deposition. During the 1st growth step, GaN layers with triangular cross sections were grown on the selected area of the surface of the PSS, and in the 2nd growth step, the GaN layers were laterally grown and coalesced with neighboring GaN layers. The density of threading dislocations on the surface of the coalesced GaN layer was $2{\sim}4\;{\times}\;10^7\;cm^{-2}$ over the entire region. The epitaxial structure of near-UV light emitting diode (LED) was grown over the GaN layers on the PSS. The internal quantum efficiency and the extraction efficiency of the LED structure grown on the PSS were remarkably increased when compared to the conventional LED structure grown on the flat sapphire substrate. The reduction in TD density and the decrease in the number of times of total internal reflections of the light flux are mainly attributed due to high level of scattering on the PSS.