• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.960-966
• /
• 2018

Communication antennas used at sea have been developed remarkably. However, the speed of this development is insufficient when compared with user demands. Therefore, we developed an antenna for UWB/Bluetooth that operates on 3 [GHz] and 5.72 [GHz] bands in order to use the high-speed communication network system which improved antenna miniaturization, gain and radiation patterns. To improve bandwidth, a microstrip patch antenna was selected and CST Microwave Studio 2014 program was used. Through the program, we calculated the slot width, length, transmission line width, etc. using a theoretical formula at each step. These figures were checked through simulation to see if they meet production standards. UWB for high-speed wireless communication for short-range communication at sea, Bluetooth for exchanging information at a short distance by connecting each device, and corresponding technology can be easily utilized.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.388-396
• /
• 2019

This paper describes the RF(Radio Frequency) interference on the GNSS receiver due to the S-band signals transmitted from the transmitters in the Test Launch Vehicle, and analyzes the cause of the RF interference. Due to the S-band signals that have relatively high power levels compared with GNSS signals, an LNA(Low Noise Amplifier) in the active GNSS antenna was saturated, and the intermodulation signal within GNSS in-bands was produced in the LNA whenever two S-band signals were received from the GNSS antenna. For these reasons, the C/N0 of the satellite signals in the GNSS receiver was attenuated severely. The design of the LNA was changed in order to protect the RF interference due to the S-band signals and the suppression capability of the RF interference was confirmed in the new LNA through the comparison of the old LNA.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.189-192
• /
• 2014

Recently, U.S. and Europe, which are advanced to Air Traffic Control Management, are interest in replacing Radar System with Communications, Navigation and Surveillance(CNS) and Air Traffic Management(ATM). They pursue to research the efficient Air Traffic Control Management. This paper covers ADS-B 1090ES system which is one of CNS/ATM surveillance systems. This research satisfied all performance required by RTCA DO-268B and EUROCAE ED-129. It optimized algorism to mainly enhance performance such as quality of receiver signal, dynamic range, and so on. The optimized mechanism provided stable performance of demodulation, tuned the level of signal, and had reduced the false reception ratio by the signal level difference. The analyzed algorism helped great performance and will be considered to apply broad system applications.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.251-262
• /
• 2021

The airworthiness certification of lightning indirect effects becomes an important issue in personal air vehicles (PAVs), which are being actively developed around the world. PAVs are very vulnerable to lightning strikes, because of miniaturization, use of the electric engines, composite materials, and application of unmanned navigation systems. In this study, we first examined various steps of certifications for lightning indirect effects shown in AC 20 136B issued by the Federal Aviation Administration (FAA). We then applied certification guidelines for equipment transient design level listed in RTCA DO 160G Section 22 to PAVs and investigated lightning transient environments inside the PAVs. We also analyzed the aircraft level tests specified in SAE ARP 5416A by using electromagnetic computational analysis software EMA3D. Finally, we analyzed the actual transient level for PAVs and derived the data necessary for conformity certification.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.3
• /
• pp.133-141
• /
• 2020

In this paper, the communication method of data information accepted by underwater drones and the implementation method to console display of data information were described, and the function of integrated monitoring system interface and the design and implementation of sonar interface were explained. The operation and posture of underwater drones can be controlled using a controller connected to the console, and the distance information between underwater drones and obstacles is obtained from sonar so that they can be visually displayed on the console screen along with camera images. The integrated monitoring navigation console is implemented to suit improvements, making it convenient and easy for workers to use. In addition, by upgrading integrated monitoring and control software functions, the company added user-specific project management functions and the output of reports for hull inspection to make them different and competitive from other underwater drones.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.2
• /
• pp.79-88
• /
• 2021

In this paper, we propose a API Gateway technique for the expansion of human resource management module, one of the ERP functions. The institution has introduced ERP (Enterprise Resource Planning) based on its efforts to transform all human and physical resources into business competitiveness and its response to the digital knowledge informatization environment, and listed it as multiple success factors. Human resource management is one of the factors that have been dealt with. However, ERP's Human Resources Management Module remains in the role of functional personnel management. How to utilize human resources begins with navigating and recognizing human resources. The proposed API Gateway technique leverages blockchain networks to design and implement APIs for human resource sharing and navigation, including the possibility of extending ERP's human resource management module. Secondly, it was designed and implemented using a smart contract that behaves like an API for preventing information forgery. The proposed method will not only be used as a tool that can actively utilize human resources, but will also be a complete resource for utilizing big data technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.44-49
• /
• 2020

Recently, one of the major issues of shipbuilding and marine is the reduction of air and marine pollution emission to ships. In response, the International Maritime Organization (IMO) has concluded an international convention (MARPOL) to prevent pollution from ships. A Annex Six of The Convention restricts and regulates air and marine pollution of ship from exhausting gases. To this end, it is required to apply EEDI (Energy Efficiency Design Indicators) to the construction of new ships, and to minimize the emission of environmental pollutants by recommending the application of EEOI (Energy Efficiency Operation Indicators) to operational ships. Therefore, in this study, we propose to calculate the grade of operating efficiency (EG) of ships based on actual operational data for transport ships and to provide energy-efficient optimal path search information through analysis of marine environment data.

• Journal of People, Plants, and Environment
• /
• v.24 no.4
• /
• pp.441-450
• /
• 2021

Background and objective: The purpose of study is to analyze the three-dimensional (3D) structure by creating a 3D model for green spaces in a park using unmanned aerial vehicle (UAV) images. Methods: After producing a digital surface model (DSM) and a digital terrain model (DTM) using UAV images taken in Mureung Park in Chuncheon-si, we generated a digital tree height model (DHM). In addition, we used the mean shift algorithm to test the classification accuracy, and obtain accurate tree height and volume measures through field survey. Results: Most of the tree species planted in Mureung Park were Pinus koraiensis, followed by Pinus densiflora, and Zelkova serrata, and most of the shrubs planted were Rhododendron yedoense, followed by Buxus microphylla, and Spiraea prunifolia. The average height of trees measured at the site was 7.8 m, and the average height estimated by the model was 7.5 m, showing a difference of about 0.3 m. As a result of the t-test, there was no significant difference between height values of the field survey data and the model. The estimated green coverage and volume of the study site using the UAV were 5,019 m² and 14,897 m³, respectively, and the green coverage and volume measured through the field survey were 6,339 m² and 17,167 m³. It was analyzed that the green coverage showed a difference of about 21% and the volume showed a difference of about 13%. Conclusion: The UAV equipped with RTK (Real-Time Kinematic) and GNSS (Global Navigation Satellite System) modules used in this study could collect information on tree height, green coverage, and volume with relatively high accuracy within a short period of time. This could serve as an alternative to overcome the limitations of time and cost in previous field surveys using remote sensing techniques.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.11-16
• /
• 2023

As techniques for indoor positioning, fingerprinting, indoor positioning method using trilateration, and utilizing information obtained from equipments by Wi-Fi/Bluetooth, etc are common and representative methods to specify the user's indoor position. However, in these methods, an indoor space should be provided with enough space to install a large number of equipment (AP, Beacon). In this paper, we propose a technique that can express the user's location within a building by simultaneously using the GPS signal and the signal transmitted from the beacon in a building structure where the conventional method cannot be applied, such as a narrow building. A shortest path search system was designed and implemented by applying the Dijkstra Algorithm, one of the most representative and efficient shortest path search algorithms for shortest path search. The proposed technique can be considered as one of the methods for measuring the user's indoor location considering the structural characteristics of a building in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2023

Deep web collection means entering a query in a search form and collecting response results. It is estimated that the information possessed by the deep web has about 450 to 550 times more information than the statically constructed surface web. The static method does not show the changed information until the web page is refreshed, but the dynamic web page method updates the necessary information in real time and provides real-time information without reloading the web page, but crawler has difficulty accessing the updated information. Therefore, there is a need for a way to automatically collect information on these deep webs using a crawler. Therefore, this paper proposes a method of utilizing scripts as general links, and for this purpose, an algorithm that can utilize client scripts like regular URLs is proposed and experimented. The proposed algorithm focused on collecting web information by menu navigation and script execution instead of the usual method of entering data into search forms.