• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권3호
• /
• pp.580-594
• /
• 2015

Liquid sloshing in two-dimensional (2-D) and three-dimensional (3-D) rectangular tanks is simulated by using a level set method based on the finite volume method. In order to examine the effect of natural frequency modes on liquid sloshing, we considered a wide range of frequency ratios ($0.5{\leq}fr{\leq}3.2$). The frequency ratio is defined by the ratio of the excitation frequency to the natural frequency of the fluid, and covers natural frequency modes from 1 to 5. When fr = 1, which corresponds to the first mode of the natural frequency, strong liquid sloshing reveals roof impact, and significant forces are generated by the liquid in the tank. The liquid flows are mainly unidirectional. Thus, the strong bulk motion of the fluid contributes to a higher elevation of the free surface. However, at fr = 2, the sloshing is considerably suppressed, resulting in a calm wave with relatively lower elevation of the free surface, since the waves undergo destructive interference. At fr = 2, the lower peak of the free surface elevation occurs. At higher modes of $fr_3$, $fr_4$, and $fr_5$, the free surface reveals irregular deformation with nonlinear waves in every case. However, the deformation of the free surface becomes weaker at higher natural frequency modes. Finally, 3-D simulations confirm our 2-D results.

• 한국산림과학회지
• /
• 제100권2호
• /
• pp.218-225
• /
• 2011

본 연구의 목적은 국립자연휴양림이 지역경제에 미치는 경제적 파급효과를 지역산업연관분석에 적용하여 자연휴양림의 조성 정책의 타당성을 확인할 수 있는 전략적 수단을 발굴하고자 시도되었다. 지역산업연관분석은 한국은행(2009)에서 발표된 지역산업연관표를 활용하여 자연휴양림의 생산, 소득, 부가가치, 고용파급의 승수효과 분석을 통하여 지역내(內)와 지역외(外) 경제적 유발효과를 분석하였다. 그 결과 하나의 국립자연휴양림이 지역에 미치는 경제적 파급효과는 지역내(內)에서 연간 생산파급은 3,380백만원, 소득파급 328백만원, 부가가치파급은 1,017백만원, 고용파급은 22명인 것으로 나타났다. 그리고 지역외(外)에 미치는 연간 생산파급은 687백만원, 소득파급은 85백만원, 부가가치파급은 245백만원, 고용파급은 6명인 것으로 나타났다.

• 한국안전학회지
• /
• 제36권1호
• /
• pp.86-94
• /
• 2021

Lecture rooms are crowded with many attendees. Moreover, they rely significantly on the natural ventilation through windows for removing and controlling indoor contaminants such as CO₂. With the aim of broadening the understanding of the characteristics of natural ventilation phenomena in lecture rooms, the average individual CO₂ release rates of attendees were measured during the course of a lecture and compared with previously reported CO₂ release rates. In addition, the effects of natural ventilation through windows on the time-variant CO₂ concentrations in the center of the lecture room were measured and analyzed. Moreover, details about the overall and regional CO₂ concentrations, as well as the air flows in the lecture room, were simulated and analyzed with computational fluid dynamics software, Fluent 2020 R2. It was found that the average individual CO₂ release rates were slightly slower than previously reported rates. The local CO₂ concentrations in the lecture room for regions with a high density of attendees increased over a short period of time, although the natural ventilation was already started by opening the windows. The overall CO₂ concentration in the lecture room rapidly decreased in the early stage of ventilation, but declined very slowly after a longer period of ventilation time. Therefore, in order to enhance the efficiency of a lecture room's natural ventilation, it is recommended to homogeneously distribute the attendees in the lecture room, and to frequently open the windows for short periods of time.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.503-508
• /
• 2004

Optimal remediation design using the pump and treat(P&T) method and natural attenuation was accomplished in consideration for degradation processes, such as sorption and first-order decay rate. Variation of both sorption and first-order decay rate has influence on design of optimal remediation application. When sorption effect increases, the more pumping rate and pumping wells are required. The location of operated wells is on the centerline of contaminant plume and wells near hot spot are mainly operated when sorption effect increases. The higher of first-order decay rate, the less pumping rate is required. These results show that the degradation processes have to be considered as one of the essential factors for optimal remediation design.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.65-75
• /
• 1996

The probability distributio function (pdf) of transmitted symbols should be asymmectric for recovering the received data in the 3rd order blind equalizer system. In this paper, we hav edesigned the blind equalizer using symmetric-asymmetric (SA) and asymmetric-symmetric (AS) transforms for less computational complexities and robustness in the noisy environments. The method of SA and AS transform was peformed using natural logarithmic operation. This paper proves that the proposed in this paper can be performed as real time operation. This paper proves that the compression factor k has no effet on transmitted symbols. Also 3rd order equalization method proposed in this paper can be performed as real time operation. As a result of computer simulatio, the computational complexity of proposed algorithm is reduced to be an half of 4th order method and MSE is enhanced as 10dB at the case of 4-PAM and 15dB at the case of 8-PAM respectivley. Conclusively, we have found that 3rd order blind equalizer can be implemented when the pdf of transmitter is asymmetric.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제2권1호
• /
• pp.51-62
• /
• 2008

This paper proposes a second-order implicit constraint enforcement method which yields enhanced controllability compared to a first-order implicit constraints enforcement method. Although the proposed method requires solving a linear system twice, it yields superior accuracy from the constraints error perspective and guarantees the precise and natural movement of objects, in contrast to the first-order method. Thus, the proposed method is the most suitable for exact prediction simulations. This paper describes the numerical formulation of second-order implicit constraints enforcement. To prove its superiority, the proposed method is compared with the firstorder method using a simple two-link simulation. In this paper, there is a reasonable discussion about the comparison of constraints error and the analysis of dynamic behavior using kinetic energy and potential energy.

• Structural Engineering and Mechanics
• /
• 제56권3호
• /
• pp.423-442
• /
• 2015

This study examines the wavelet transform for output-only system identification of ambient excited engineering structures with emphasis on its utilization for modal parameter estimation of high-order and closely-spaced modes. Sophisticated time-frequency resolution analysis has been carried out by employing the modified complex Morlet wavelet function for better adaption and flexibility of the time-frequency resolution to extract two closely-spaced frequencies. Furthermore, bandwidth refinement techniques such as a bandwidth resolution adaptation, a broadband filtering technique and a narrowband filtering one have been proposed in the study for the special treatments of high-order and closely-spaced modal parameter estimation. Ambient responses of a 5-story steel frame building have been used in the numerical example, using the proposed bandwidth refinement techniques, for estimating the modal parameters of the high-order and closely-spaced modes. The first five natural frequencies and damping ratios of the structure have been estimated; furthermore, the comparison among the various proposed bandwidth refinement techniques has also been examined.

• Steel and Composite Structures
• /
• 제25권1호
• /
• pp.67-78
• /
• 2017

In this study, free vibration of functionally graded (FG) micro/nanobeams based on nonlocal third-order shear deformation theory and under different boundary conditions is investigated by applying the differential quadrature method. Third-order shear deformation theory can consider the both small-scale effects and quadratic variation of shear strain and hence shear stress along the FG nanobeam thickness. The governing equations are obtained by using the Hamilton's principle, based on third-order shear deformation beam theory. The differential quadrature (DQ) method is used to discretize the model and attain the natural frequencies and mode shapes. The properties of FG micro/nanobeam are assumed to be chanfged along the thickness direction based on the simple power law distribution. The effects of various parameters such as the nonlocal parameter, gradient index, boundary conditions and mode number on the vibration characteristics of FG micro/nanobeams are discussed in detail.

• 소음진동
• /
• 제9권2호
• /
• pp.340-347
• /
• 1999

The acoustic performance of reactive type single expansion chamber can be calculated theoretically by plane wave theory. But higher order model should be considered to widen the frequency range. Mode matching method has been developed to consider higher order modes, but very complicated algebra should be used. Munjal suggested a numerical collocation method, which can overcome the shortcomings of mode matching method, using the compatibility conditions for acoustic pressure and particle velocity at the junctions of area discontinuities. But the restriction of Munjal's method is that the ratio between the area of inlet(or outlet) pipe and that of chamber must be natural number. In this paper, the new method was suggested to overcome the shortcomings of Munjal's method. The predictions by this method was also compared with those by the finite element method and Munjal's method in order to demonstrate the accuracy of the modified method presented here.

• 대한수학회지
• /
• 제38권5호
• /
• pp.937-954
• /
• 2001

This paper is a natural continuation of [2], [3], [4] and [5]. Localization techniques for modular lattices are developed. These techniques are applied to study liftings of linear order types from quotient lattices and to find Г-dense sets in certain lattices without Г-deviation in the sense of [4], where Г is a set of indecomposable linear order types.